RIDGID®•400 Clark St., Elyria Ohio 44035-6001 U.S.A. •Visit us on the Internet: www.RIDGID.com
Printed in U.S.A. © RIDGID, Inc. 5/08 All sales subject to Ridge Tool Company Terms and Conditions of Sales. 999-997-211.10
Catalog Sheet No. R-97-I Effective Date: May 1, 2008
Threading Machine
Model 1210 1
″
Oil-less
Threading Machine
Thread Clean
The Model 1210 is the world’s first COMPLETELY OIL-LESS
Threading Machine! No more worrying about oil spills and drips,
no more setting up away from the installation site...with the
Model 1210 you can thread right where you install: in base-
ments, on rooftops, even in finished rooms! To eliminate cutting
oil, the Model 1210 combines specially formulated RIDGID
Thread Cutting Coolant and unique RIDGID Oil-less Gold Dies.
RIDGID Thread Cutting Coolant will evaporate on contact
with the pipe and leave you with a clean, dry, extremely
high quality thread ready for immediate installation!
Thread Fast
The 1210’s new, advanced coolant flow system
allows you to begin threading right away, no
matter how long the machine has sat idle.
Faster priming means faster jobs!
Keep Moving
At only 59 lb., the 1210 can be carried to and around the jobsite by one man. Cut, ream, thread - the Model 1210
has all the tools you expect on a larger machine and a powerful 1/2HP universal motor to get the job done. And its
reformulated coolant dramatically advances die life for maximum uptime.
Thread where you need to thread! Save time, money, and improve your service productivity with the RIDGID
Model 1210 Oil-less Threading Machine.
Capacity
Pipe:1/2″, 3/4″, 1″
Technical Specifications
Motor:1/2HP, 115V Universal 50-60 Hz
Motor Control:Heavy-Duty Toggle ON/OFF with Integral Foot Switch
Spindle Speed:25 RPM
Chuck: Hammer-type with Replaceable Inserts; Cam Action Rear Chuck
Coolant System:Through-the-head with Integral Coolant Reservoir; Self-priming Gerotor Pump; 20 oz. Reservoir Capacity
Standard Equipment
Model 1210 Oil-less Threading Machine with
Foot Switch
1 - Model 610 Quick-Open Die Head
1 - Model 334 Reamer
1 - Model 354 Cutter
1 - Set 1/2 - 3/4″Oil-less Gold Dies
1 - Set 1″Oil-less Gold Dies
1 - Quart Thread Cutting Coolant
Catalog Model
No. No. Description lb. kg
Machine
67872 1210 1/2″- 1″NPT, 115V, 25-60 Hz 59 26,8
Die Head
67817 610 1/2″- 1″NPT, Quick-Opening, RH 11 5,0
Dies
67807 — 1/2″- 3/4″NPT Oil-less Gold, RH 1 0,5
67812 — 1″NPT Oil-less Gold, RH 1 0,5
Coolant
30693 — 1 Qt. Thread Cutting Coolant 2 0,9
Stand
67822 120 Folding Stand 12 5,5
Please Note: The Model 1210 is warranted for use only with RIDGID Thread Cutting Coolant and RIDGID Oil-less Gold Dies. RIDGID Thread
Cutting Coolant and RIDGID Oil-less Gold Dies are not for use with any other RIDGID threading equipment.
NEW!
