RIF6 RIF110489N User manual
Freestanding Punching Bag
Need to speak to an expert?
This product will arrive in two separate boxes. One for the bag and one for the base.
Assembly cannot begin until both boxes have arrived.
TABLE OF CONTENTS
Important Safety
Instructions
Assembly Instructions
Warranty Information Warning
Contact Us
Parts Overview
Specifications
04
06
07 07
07
05
07
FREESTANDING PUNCHING BAG | 4
IMPORTANT SAFETY INSTRUCTIONS
• Read the entire manual carefully before assembly or use.
• This punching bag is only for home use and physical training. It is not recommended for gym or game use.
• This punching bag is not a toy. Children should not use it unless they are supervised by an adult. People who are unfamiliar
with this product should be informed of the basic rules before starting use.
• While using this punching bag, wear safety devices such as boxing gloves, knee pads, and elbow pads to prevent injury.
• The bag surface should not be scraped by solid objects as it is made of artificial leather.
• This punching bag holds up well on a smooth and flat hard floor as there are 12 powerful suction cups at the base bottom.
Remove these suction cups if you use the punching bag on carpet or lawn.
• Before each use, check to ensure that the punching bag is in good condition and the base cap is tightened.
• This punching bag should not be left in the rain or damp areas.
• This punching bag should be used and stored in a ventilated and dry place.
• Do not put this punching bag together with a corrosive product. Do not put it in direct sunshine for too long.
FREESTANDING PUNCHING BAG | 5
PARTS OVERVIEW
Suction cups
Filler hole
Bag
Base
ACCESSORY LIST
1. Top bag × 1
2. Screws × 12
3. Base × 1
4. Suction cups × 12
FREESTANDING PUNCHING BAG | 6
ASSEMBLY INSTRUCTIONS
Find a spacious and clear area for
assembly. Place the base on a level
surface where you plan to use the
punching bag.
Screw the suction cups (12 pcs) to
the base bottom securely.
Use a funnel to fill the base with sand
through the top hole, or use a hose to
fill with water. Make sure the fillings
are evenly distributed inside the base.
Do not exceed 4/5 of the base volume,
otherwise it might cause leakage.
Tighten the base cap securely.
Note: Base will be more stable if filled
with sand.
Tighten the screws (12 pcs) securely to
connect the bag to the base.
FREESTANDING PUNCHING BAG | 7
SPECIFICATIONS
Base diameter 23.6” Bag diameter 12.6” Product height 68.9” Base capacity 55 L Product weight 44.1 Ib
CONTACT US
RIF6 oers a 12-month warranty on all of our products purchased new and unused from RIF6 or an authorized reseller, with
an original proof of purchase and where a defect has arisen, wholly or substantially, as a result of faulty manufacturing, parts
or workmanship during the 12-month warranty period. The warranty does not apply where damage is caused by other factors,
including but without limitation: (a) normal wear and tear; (b) abuse, mishandling, accident or failure to follow operating instructions;
(c) exposure to liquid or infiltration of foreign particles; (d) servicing or modification of the product other than by RIF6. These are our
general terms for the warranty service, but we always urge our customers to reach out to us with any issue, regardless of warranty
terms. If you experience an issue with a RIF6 product, please contact us at [email protected], and we will do our best to resolve it
for you.
WARRANTY INFORMATION
WARNING
This manual is to be used with all items with the model number
RIF110489N
Keep all plastic bags away from children.
FREESTANDING PUNCHING BAG | 8
learn more at rif6.com
Table of contents
