Rigid Hitch BULL BAR User manual

INSTALLATION INSTRUCTION
BULL BAR
2006-08 DODGE RAM 1500
PART NUMBER 200591

BULL BAR
2006-08 DODGE RAM 1500
Page 1 of 1
PARTS LIST:
(1) –BULL BAR
(2) –BRACKETS (DRIVER/PASSENGER SIDE)
(6) –7/16 X 1 1/4 HEX HEAD BOLTS
(6) –7/16 HEX HEAD NUTS
(6) –7/16 LOCK WASHERS
(12) –7/16 FLAT WASHERS
PROCEDURE:
1 –REMOVE CONTENTS FROM BOX AND CHECK FOR DAMAGE. VERIFY ALL PARTS ARE
PRESENT. READ INSTRUCTIONS CAREFULLY.
2 –REMOVE LOWER URETHANE VALANCE LOCATED UNDERNEATH FRONT BUMPER
TEMPORARILY AND SET ASIDE.
3 –UNBOLT (2) EXISTING NUTS LOCATED ON OUTER SIDE OF FRAME RAIL (PASSENGER
SIDE SHOWN) INSTALL LOWER BRACKET ONTO FRAME RAIL BOLTS *LEAVE LOOSE*
(SEE FIG # 1)
4 –REPEAT PROCEDURE #3 ON OPPOSITE SIDE
5- INSTALL BULL BAR USING 6 –7/16 X 1 1/4 HEX HEAD BOLTS, 6 –7/16 HEX HEAD NUTS,
12 –7/16 FLAT WASHERS ，(6) –7/16 LOCK WASHERS *LEAVE LOOSE* (SEE FIG # 1)
6 –LEVEL AND ADJUST BULL BAR AS DESIRED. TIGHTEN & TORQUE BOLTS
7 –MEASURE AND TRIM LOWER URETHANE VALANCE AS DESIRED. REINSTALL
VALANCE ON TO FRONT BUMPER.
Fig #1
7/16 Hardware
Passenger side show
Existing Nuts