Rigol DSA700 series User manual

RIGOL
User’s Guide
DSA700 Options and Accessories
Jun. 2016
RIGOL TECHNOLOGIES, INC.

RIGOL
DSA700 Options and Accessories
I
Guaranty and Declaration
Copyright
© 2016 RIGOL TECHNOLOGIES, INC. All Rights Reserved.
Trademark Information
RIGOL is a registered trademark of RIGOL TECHNOLOGIES, INC.
Publication Number
UMD18100-1110
Notices
RIGOL products are covered by P.R.C. and foreign patents, issued and pending.
RIGOL reserves the right to modify or change parts of or all the specifications
and pricing policies at the company’s sole decision.
Information in this publication replaces all previously released materials.
Information in this publication is subject to change without notice.
RIGOL shall not be liable for either incidental or consequential losses in
connection with the furnishing, use, or performance of this manual, as well as
any information contained.
Any part of this document is forbidden to be copied, photocopied, or rearranged
without prior written approval of RIGOL.
Product Certification
RIGOL guarantees that this product conforms to the national and industrial
standards in China as well as the ISO9001:2008 standard and the ISO14001:2004
standard. Other international standard conformance certifications are in progress.
Contact Us
If you have any problem or requirement when using our products or this manual,
please contact RIGOL.
E-mail: [e-mail]
Websites: www.rigol.com

RIGOL Content
DSA700 Options and Accessories
II
Content
Guaranty and Declaration......................................................................... I
DSA700 Options and Accessories .............................................................1
Standard Accessories ...............................................................................3
EMI Filter and Quasi-Peak Detector .........................................................4
Advanced Measurement Kit......................................................................5
USB-GPIB Interface Converter...............................................................11

RIGOL
DSA700 Options and Accessories
1
DSA700 Options and Accessories
Options and accessories provided by DSA700 series spectrum analyzer are as shown
in the table below. If needed, please contact RIGOL or the local distributors. This
manual only introduces the functions of some options. For the option with remark in
the table below, refer to the dedicated manual.
Description
Order
Number
Model
spectrum analyzer, 100 kHz to 500 MHz (with
preamplifier) DSA705
spectrum analyzer, 100 kHz to 1 GHz (with
preamplifier) DSA710
Standard
accessories quick guide (hard copy) -
power cable -
Options
EMI filter & quasi-peak detector EMI-DSA800
advanced measurement kit AMK-DSA800
DSA PC software
[1]
Ultra Spectrum
signal seamless capture
SSC-DSA
Optional
accessories
include: N-SMA cable, BNC-BNC cable, N-BNC
adaptor, N-SMA adaptor, 75 Ωto 50 Ω adaptor,
900 MHz/1.8 GHz antenna (2pcs), 2.4 GHz
antenna (2pcs)[2]
DSA Utility Kit
include: N(F)-N(F) adaptor (1pcs), N(M)-N(M)
adaptor (1pcs), N(M)-SMA(F) adaptor (2pcs),
N(M)-BNC(F) adaptor (2pcs), SMA(F)-SMA(F)
adaptor (1pcs), SMA(M)-SMA(M) adaptor (1pcs),
BNC T type adaptor (1pcs), 50 Ω SMA load (1pcs),
50 Ω BNC impedance adaptor (1pcs)[2]
RF Adaptor Kit
include: 50 Ω to 75 Ω adaptor (2pcs)
[2]
RF CATV Kit
include: 6dB attenuator (1pcs), 10dB attenuator
(2pcs)[2] RF Attenuator
Kit
30dB high power attenuator, max. power 100W
[2]
ATT03301H
N(M)-N(M) RF cable[2] CB-NM-NM-75-L
-12G

RIGOL
DSA700 Options and Accessories
2
N(M)-SMA(M) RF cable[2] CB-NM-SMAM-7
5-L-12G
RF demo kit (transmitter)
[2]
TX1000
RF demo kit (receiver)
[2]
RX1000
near field probe[2]
NFP-3
EMI pre-compliance test software[3]
S1210 EMI
Pre-compliance
Software
rack mount kit
[2]
RM-DSA800
soft carrying bag BAG-G1
USB cable
CB-USBA-USBB-
FF-150
USB to GPIB interface converter for instrument USB-GPIB
Remark:
[1] For more details of this option, refer to the help document of Ultra Spectrum (you can call the
manual by clicking the icon in the upper right corner of the software, or download the manual
from www.rigol.com).
[2] For more details, refer to the corresponding manual (included in the option package in hard
copy form, or download the manual from www.rigol.com).
[3] For more details of this accessory, refer to the help document of S1210 EMI Pre-compliance
Software (you can call the manual by clicking Help in the menu bar of the software, or download
the manual from www.rigol.com).

RIGOL
DSA700 Options and Accessories
3
Standard Accessories
The following are the standard accessories.
Power Cord Quick Guide
Note: Images in this section are indicative only. The actual products you receive may
differ.

RIGOL
DSA700 Options and Accessories
4
EMI Filter and Quasi-Peak Detector
EMI-DSA800 option provides Quasi-Peak detector and EMI filter (200 Hz, 9 kHz, 120
kHz, -6 dB bandwidth). Quasi-Peak detection is a weighted form of peak detection.
For each data point, the detector detects the peaks within the specified time interval,
weights the peaks detected using circuit with specified charge and discharge
structures as well as the display time constant specified in the CISPR Publication 16
standards and display the result. By default, the instrument uses Gauss filter and will
switch to EMI filter automatically if Quasi-Peak detector is selected.
Press BW/Det at the front panel. Then, press Det Type to select Quasi-Peak
detector. At this point, the instrument automatically changes the filter type to EMI
and the Filter Type menu is grayed out and disabled. EMI-DSA800 option is used in
electromagnetic interference test.

RIGOL
DSA700 Options and Accessories
5
Advanced Measurement Kit
AMK-DSA800 option provides various measurement functions, including T-Power,
ACP (Adjacent Channel Power), Chan Pwr (Channel Power), OBW (Occupied
Bandwidth), EBW (Emission Bandwidth), C/N Ratio, Harmo Dist (Harmonic Distortion)
and TOI (Third Order Intermodulation). For advanced measurement functions, the
measurement mode can be single or continuous and you can control the
measurement including Restart, Pause and Resume.
Press Meas at the front panel and then press Meas Fctn to select a measurement
function. The screen is divided into two windows with the upper window (the basic
measurement window) displaying the sweep trace and the lower window displaying
the measurement results.
1. T-power
The system enters zero span mode and calculates the power within the time
domain. The types of powers available include Peak, Average and RMS.
Measurement Result Measurement Parameters
Measurement Control
Start Line Stop Line

RIGOL
DSA700 Options and Accessories
6
2. ACP
Measure the powers of the main channel and adjacent channels as well as the
power difference between the main channel and each of the adjacent channels.
When this function is enabled, the span and resolution bandwidth of the
analyzer are adjusted to smaller values automatically.
3. Chan Pwr
Measure the power and power spectral density within the specified channel
bandwidth. When this function is enabled, the span and resolution bandwidth
are automatically adjusted to smaller values.
Main Channel Bandwidth
Adjacent Channel Bandwidth
Channel Spacing

RIGOL
DSA700 Options and Accessories
7
4. OBW
Integrate the power within the whole span and calculate the bandwidth
occupied by this power according to the specified power ratio. The OBW
function also indicates the difference between the center frequency of the
channel under measurement and the center frequency of the analyzer.
Integration Bandwidth Channel Power Span

RIGOL
DSA700 Options and Accessories
8
5. EBW
Measure the bandwidth between two points on the signal which are X dB below
the highest point within the span.
6. C/N Ratio
Measure the powers of the carrier and noise with the specified bandwidths as
well as their power ratio.
Offset Frequency
Carrier Bandwidth
Noise Bandwidth

RIGOL
DSA700 Options and Accessories
9
7. Harmo Dist
Measure the power of each order of harmonic and THD (total harmonic
distortion) of the carrier. The highest order of harmonic available is 10 and the
fundamental wave amplitude must be greater than -50 dBm, or else the
measurement will be invalid.

RIGOL
DSA700 Options and Accessories
10
8. TOI
Measure the parameters of the TOI production of two signals with the same
amplitude and similar frequency. Those parameters include the frequencies and
amplitudes of the Base Lower, Base Upper, 3rd Order Lower and 3rd Order
Upper signal, as well as the Intercepts of both the Base Lower and Base Upper.

RIGOL
DSA700 Options and Accessories
11
USB-GPIB Interface Converter
Through the RIGOL USB-GPIB interface converter, the spectrum analyzer can be
connected to the GPIB bus controller of the PC, namely to expand a GPIB interface
through which the spectrum analyzer can finish various tasks using the GPIB
instructions more easily for the spectrum analyzer. The performance characteristics
of the USB-GPIB interface converter are listed below.
Connect the USB interface and the GPIB interface of the USB-GPIB interface
converter to the USB Host interface of the spectrum analyzer and the GPIB bus
controller of the PC respectively.
Achieve GPIB control via the USB Host interface of the
spectrum analyzer.
Distribute a GPIB address for the spectrum analyzer via
the GPIB host device (PC).
USB powered instead of external power supply.
Indicate the power status via a LED.
LED Power Indicator
Spectrum
Analyzer
PC
GPIB
USB