Rigol DS2000A Series User manual

Series
Digital Oscilloscope
Series
Digital Oscilloscope
DS2000A
DS2000A Series is the new mainstream digital scope to meet the
customer's applications with its innovative technology, industry
leading specifications, powerful trigger functions and broad
analysis capabilities.
Wider vertical range(500uV/div ~ 10V/div), lower noise  oor,
Better for small signal capturing
Bandwidth 70MHz,100MHz,200MHz,300MHz,standard 50Ω input
Max. Sample Rate 2G Sa/s
Standard Memory Depth up to14Mpts,Optional Memory Depth
up to 56Mpts
Innovative "UltraVision" technology
Waveform capture rate up to 50,000 wfs/s
Up to 256 Levels intensity grading waveform display
Up to 65,000 frames Hardware based Real Time waveform,
Record, Replay & Analysis functions(Std.)
A variety of trigger and serial bus decording
functions(RS232,I2C,SPI,CAN)
Built-in 2 Ch Waveform generator (DS2000A-S)
Complete connectivities: USB Host& Device, LAN(LXI), AUX
Compact size, light weight, easy to use
8 inch TFT (800x480) WVGA

DS2000A Series Digital Oscilloscope
Models and Key Specications
RUN/STOP/SINGLE
Decoding
Waveform record&replay
Independent control for each channel
Deeper Memory Depth (Std.14Mpts,Opt.56Mpts)
Higher Waveform Capture Rate (Up to 50,000 wfms/s)
Realtime Waveform Record,Replay & Analysis (Up to 65,000 frames)
Multi-level Intensity Grading Display (Up to 256 Levels)
Innovative UltraVision technology
Product Dimensions: Width X Height X Depth=361.6 mm×179.6 mm×130.8 mm Weight: 3.9 kg ± 0.2 kg(Without Package)
1RIGOL
Model Number DS2072A DS2072A-S DS2102A DS2102A-S DS2202A DS2202A-S DS2302A DS2302A-S
Analog BW 70 MHz 100MHz 200 MHz 300 MHz
Channels 2
Max. Sample rate 2GSa/s (Single-channel)、 1GSa/s(Dual-channel）
Max. Memory Depth 14Mpts（std.）、56Mpts（option）
Max. Waveform
Capture rate 50,000 wfms/s
Real Time waveform
Record,
Replay and Analysis
function
Up to 65，000 Frames
Std. Probes RP3300A 350MHz BW Passive Probe:2 sets
Built-in 2Ch 25MHz
Source No Yes No Yes No Yes No Yes

Wider Vertical range(500uV/div~10V/div
)
,Lower noise
oor, Better for small signal capturing
Full bandwidth,Lower Overshoot, Perfect frequency
response design
UltraVision: Deeper memory(Std.14Mpts,Opt.56Mpts)
UltraVision:Realtime waveform record,replay,analysis
function (std.)
Std. serial bus trigger functions(RS232,I2C,SPI)
UltraVision: Deeper Memory with Multi-Level intensity
grading display(Up to 256 levels)
UltraVision: Up to 50,000 wfms/s Waveform capture rate
Optional Serial bus decoding function with listing display
RIGOL 2

Versatile Trigger Functions
(
Runt, Nth Edge,Setup/Hold …
)
Runt Trigger
Std. Advanced Math Function
Built-in 2CH Source(DS2000A-S)
Std. Mask Test Function
Arb function of the Built-in 2CH Source (DS2000A-S)
Complete Connectivity(USB Host,USB Device,LAN,AUX)
Automatic measurements with statistics
3RIGOL

RIGOL 4
RIGOL Probes supported by DS2000A Series:
RIGOL Passive Probes RIGOL Active & Current Probes
Model Number Tpye Description
RP1001C
Current
Probe
BW:DC~300kHz,
Max.DC:±100A,
AC P-P:200A,AC RMS:70A
Compatibility：All RIGOL Scopes.
RP1002C
Current
Probe
BW:DC~1MHz,
Max.DC:±70A,
AC P-P:140A,AC RMS:50A
Compatibility：
All RIGOL Scopes.
RP1003C
Current
Probe
BW:DC~50MHz,
Max.AC RMS:30A
AC Peak:50A(Noncontinuous)
Compatibility：
All RIGOL Scopes.
Must order RP1000P Power supply.
RP1004C
Current
Probe
BW:DC~100MHz,
Max. AC RMS:30A,
AC Peak:50A(Noncontinuous)
Compatibility：
All RIGOL Scopes.
Must order RP1000P Power supply.
RP1005C
Current
Probe
BW:DC~10MHz,
Max.150 A rms,
300 A peak (Noncontinuous),
500 A peak (@pulse width <=30 ms)
Compatibility：
All RIGOL Scopes.
Must order RP1000P Power supply.
RP1000P
Power
Supply
Power supply for
RP1003C,RP1004C,RP1005C,
support 4 channels.
RP1025D
High
Voltage
Differential
Probe
BW:25MHz;
Max. Voltage ≤ 1400Vpp
Compatibility：
All RIGOL Scopes.
RP1050D
High
Voltage
Differential
Probe
BW:50MHz;
Max. Voltage ≤ 7000Vpp
Compatibility：
All RIGOL Scopes.
RP1100D
High
Voltage
Differential
Probe
BW:100MHz;
Max. Voltage ≤ 7000Vpp
Compatibility:
All RIGOL scopes
Model Number Tpye Description
RP2200
High Z
Probe
1X: DC~7MHz
10X:DC~150MHz
Compatibility：
All RIGOL Scopes.
RP3300A
High Z
Probe
1X: DC~8MHz
10X:DC~350MHz
Compatibility：
All RIGOL Scopes.
RP3500A
High Z
Probe
DC~500MHz
Compatibility：
All RIGOL Scopes.
RP1300H
High
Voltage
Probe
DC~300MHz
CATI 2000V(DC+AC),
CATII 1500 V(DC+AC)
Compatibility：
All RIGOL Scopes.
RP1050H
High
Voltage
Probe
DC~50MHz
DC:0~15KV
DC,AC:pulse <=30KVp-p,
AC:sine wave <=10KVrms
Compatibility：
All RIGOL Scopes.

Specications
All the specications are guaranteed except parameters marked with “Typical” and the oscilloscope needs to operate for more than 30 minutes under the specied
operation temperature.
5RIGOL
Sample Mode Real-time Sample
Real Time Sample Rate 2 GSa/s (single-channel)
1 GSa/s (dual-channel)
Peak Detect 500 ps (single-channel)
1 ns (dual-channel)
Averaging After both the channels nish N samples at the same time, N can be 2, 4, 8, 16, 32, 64, 128, 256, 512,
1024, 2048, 4096 or 8192.
High Resolution 12 bits of resolution when ≥5 μs/div @ 1 GSa/s (or ≥10 μs/div @ 500 MSa/s).
Memory Depth single-channel: Auto, 14k pts, 140k pts, 1.4M pts, 14M pts and 56M pts (option) are available
dual-channel: Auto, 7k pts, 70k pts, 700k pts, 7M pts and 28M pts (option) are available
Input
Number of Channels Two channels
Input Coupling DC, AC or GND
Input Impedance (1MΩ±1%)||(16 pF±3 pF)
or 50 Ω±1.5%
Probe Attenuation Coefcient 0.01X to 1000X, in 1-2-5 step
Maximum Input Voltage (1MΩ) Maximum Input Voltage of the Analog Channel
CAT I 300 Vrms, CAT II 100 Vrms,
Transient Overvoltage 1000 Vpk
with RP2200 10:1 probe: CAT II 300 Vrms
with RP3300A 10:1 probe: CAT II 300 Vrms
with RP3500A 10:1 probe: CAT II 300 Vrms
Horizontal
Timebase Scale DS2302A: 1 ns/div to 1000 s/div
DS2202A: 2.000 ns/div to 1000 s/div
DS2102A/DS2072A : 5.000 ns/div to 1000 s/div
Timebase Accuracy1≤ ± 25 ppm
Clock Drift ≤ ± 5 ppm/year
Max Delay Range Pre-trigger (negative delay): ≥1 screen width
Post-trigger (positive delay): 1 s to 100,000 s
Timebase Mode Y-T, X-Y, Roll, Delayed Sweep
Number of XYs 1
Waveform Capture Rate250,000 wfms/s (dots display)
Vertical
Bandwidth (-3dB) DS2302A: DC to 300 MHz
DS2202A: DC to 200 MHz
DS2102A: DC to 100 MHz
DS2072A: DC to 70 MHz
Single-shot Bandwidth DS2302A: DC to 300 MHz
DS2202A: DC to 200 MHz
DS2102A: DC to 100 MHz
DS2072A: DC to 70 MHz
Vertical Resolution 8bit
Vertical Scale 500 μV/div to 1 V/div (50Ω)
500 μV/div to 10 V/div (1MΩ)
Offset Range 500 μV /div to 50 mV/div: ± 2 V
51 mV/div to 200 mV/div: ± 10 V
205 mV/div to 2 V/div: ± 50 V
2.05 V/div to 10 V/div: ± 100 V
Bandwidth Limit 1 DS2302A/DS2202A : 20 MHz/100 MHz
DS2102A/DS2072A : 20 MHz
Low Frequency Response
(AC Coupling, -3dB) ≤5 Hz (on BNC)
Calculated Rise Time 1 DS2302A: 1.2ns
DS2202A: 1.8 ns
DS2102A: 3.5 ns
DS2072A: 5 ns
DC Gain Accuracy ±2% full scale
Sample

DC Offset Accuracy ±0.1 div ± 2 mV ± 1% offset value
Channel to Channel Isolation DC to maximum bandwidth: >40 dB
Trigger
Trigger Level Range Internal ± 5 div from center of the screen
EXT ± 4 V
Trigger Mode Auto, Normal, Single
Holdoff Range 100 ns to 10 s
High Frequency Rejection175 kHz
Low Frequency Rejection175 kHz
Trigger Sensitivity 1 div (below 10 mV or noise rejection is enabled)
0.3 div (above 10 mV and noise rejection is disabled)
Edge Trigger
Edge Type Rising, Falling, Rising&Falling
Pulse Trigger
Pulse Condition Positive Pulse Width (greater than, lower than, within specic interval)
Negative Pulse Width (greater than, lower than, within specic interval)
Pulse Width Range 2 ns to 4 s
Runt Trigger
Pulse Width Condition None, >, <, <>
Pulse Polarity Positive, Negative
Pulse Width Range 2 ns to 4 s
Windows Trigger (Option)
Windows Type Rising, Falling, Rising&Falling
Trigger Position Enter, Exit, Time
Windows Time 16 ns to 4 s
Nth Edge Trigger (Option)
Edge Type Rising, Falling
Idle Time 16 ns to 10 s
Edge Number 1 to 65535
Slope Trigger
Slope Condition Positive Slope (greater than, lower than, within specic interval)
Negative Slope (greater than, lower than, within specic interval)
Time Setting 2 ns to 4 s
Video Trigger (HDTV Option)
Signal Standard Support standard NTSC, PAL and SECAM broadcasting standards; support 480P, 576P, 720P, 1080P and
1080I HDTV standards
Pattern Trigger
Pattern Setting H, L, X, Rising, Falling
Delay Trigger (Option)
Edge Type Rising, Falling
Delay Type >, <, <>, ><
Delay Time 2 ns to 4 s
TimeOut Trigger (Option)
Edge Type Rising, Falling, Rising&Falling
Timeout time 16 ns to 4 s
Duration Trigger (Option)
Pattern H, L, X
Trigger Condition >, <, <>
Duration Time 2 ns to 4 s
Setup/Hold Trigger
Edge Type Rising, Falling
Data Type H, L
Setup Time 2 ns to 1 s
Hold Time 2 ns to 1 s
RS232/UART Trigger
Polarity Normal, Invert
Trigger Condition Start, Error, Check Error, Data
Baud Rate 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps, User
Data Bits 5 bit, 6 bit, 7 bit, 8 bit
I2C Trigger
Trigger Condition Start, Restart, Stop, Missing ACK, Address, Data, A&D
Address Bits 7 bit, 8 bit, 10 bit
Address Range 0 to 127, 0 to 255, 0 to 1023
Byte Length 1 to 5
RIGOL 6

SPI Trigger
Trigger Condition Timeout
Timeout Value 100 ns to 1 s
Data Bits 4 bit to 32 bit
Data Line Setting H, L, X
CAN Trigger
Signal Type Rx, Tx, CAN_H, CAN_L, Differential
Trigger Condition SOF, EOF, Frame Type, Frame Error
Baud 10 kbps, 20 kbps, 33.3 kbps, 50 kbps, 62.5 kbps, 83.3 kbps, 100 kbps, 125 kbps, 250 kbps, 500 kbps, 800
kbps, 1 Mbps, User
Sample Point 5% to 95%
Frame Type Data, Remote, Error, OverLoad
Error Type Bit Fill, Answer Error, Check Error, Format Error, Random Error
USB Trigger (Option)
Signal Speed Low Speed, Full Speed
Trigger condition SOP, EOP, RC, Suspend, Exit Suspend
Measure
Cursor
Manual Mode
Voltage Deviation between Cursors (△V)
Time Deviation between Cursors (△T)
Reciprocal of △T (Hz) (1/△T)
Track Mode Voltage and Time Values of the Waveform Point
Auto Mode Allow to display cursors during auto measurement
Auto Measurement
Measurements of Maximum, Minimum, Peak-Peak Value, Top Value, Bottom Value, Amplitude, Average,
Mean Square Root, Overshoot, Pre-shoot, Area, Period Area, Frequency, Period, Rise Time, Fall Time,
Positive Pulse Width, Negative Pulse Width, Positive Duty Cycle, Negative Duty Cycle, Delay AB, Delay
AB, Phase AB, Phase AB
Number of Measurements Display 5 measurements at the same time.
Measurement Range Screen or cursor.
Measurement Statistic Average, Max, Min, Standard Deviation, Number of Measurements
Frequency Counter Hardware 6 bits frequency counter
(channels are selectable)
Math Operation
Waveform Operation A+B, A-B, A×B, A/B, FFT, Editable Advanced Operation, Logic Operation
FFT Window Function Rectangle, Hanning, Blackman, Hamming
FFT Display Split, Full Screen
FFT Vertical Scale Vrms, dB
Logic Operation AND, OR, NOT, XOR
Math Function Intg, Diff, Log, Exp, Sqrt, Sine, Cosine, Tangent
Number of Buses for Decoding 2
Decoding Type Parallel (standard), RS232/UART (option), I2C (option) , SPI (option)
Display
Display Type 8.0 inches (203 mm) TFT LCD display
Display Resolution 800 Horizontal ×RGB×480 Vertical Pixel
Display Color 160,000 Color (TFT)
Persistence Time Min, 50ms, 100ms, 200ms, 500ms, 1 s, 2 s, 5 s, 10 s, 20 s, Innite
Display Type Dots, Vectors
Real-time Clock Time and Date (user adjustable)
Signal Source (DS2000A-S)
2
Sample Rate 200 MSa/s
Vertical Resolution 14 bits
Max. Frequency 25 MHz
Standard Waveform Sine, Square, Pulse, Ramp, Noise, DC
Arbitrary Waveform Sinc, ExpRise, ExpFall, ECG, Gauss, Lorentz, Haversine
Sine Frequency Range 0.1 Hz to 25 MHz
Flatness ±0.5 dB (relative to 1 kHz)
Harmonic Distortion -40 dBc
Spurious (non-harmonic) -40 dBc
THD 1%
SNR 40 dB
7RIGOL

Square/Pulse Frequency Range 0.1 Hz to 15 MHz
Rise Time/Fall Time <15 ns
Overshoot <5%
Duty Cycle 10% to 90%
Duty Cycle Resolution 1% or 10 ns (the larger one)
Minimum Pulse Width 20ns
Pulse Width Resolution 10 ns or 5 bits (the larger one)
Jitter 500 ps
Ramp Frequency Range 0.1 Hz to 100 kHz
Linearity 1%
Symmetry 0 to 100%
Noise Bandwidth 25 MHz (typical)
Built-in Waveform Frequency Range 0.1 Hz to 1 MHz
Arbitrary Waveform Frequency Range 0.1 Hz to 10 MHz
Length 2 to 16 kpts
Internal Storage Locations 10
Frequency Accuracy 100 ppm (<10 kHz)
50 ppm (>10 kHz)
Resolution 0.1 Hz or 4 bits (the larger one)
Amplitude Output Range 20 mVpp to 5 Vpp, HighZ
10 mVpp to 2.5 Vpp, 50 Ω
Resolution 100 μV or 3 bits (the larger one)
Accuracy 2% (1 kHz)
DC Offset Range ±2.5 V, HighZ
±1.25 V, 50 Ω
Resolution 100 μV or 3 bits (the larger one)
Accuracy ±2% of Offset setting
Interface
Standard Ports USB HOST (support USB-GPIB), USB DEVICE, LAN, Aux Output (TrigOut/PassFail)
Printer Compatibility PictBridge
General Specications
Probe Compensation Output
Output Voltage1About 3 V, peak-peak
Frequency11 kHz
Power
Power Voltage 100 to 240 V, 45 to 440 Hz
Power Maximum 50 W
Fuse 2 A, T Degree, 250 V
Environment
Temperature Range Operating: 0℃to +50℃
Non-operating: -20℃to +70℃
Cooling Method fan cooling
Humidity Range 0℃to +30℃: ≤95％Relative Humidity
+30℃to +40℃: ≤75％Relative Humidity
+40℃to +50℃: ≤45％Relative Humidity
Altitude Operating: under 3,000 meters
Non-operating: under 15,000 meters
Mechanical Specications
Size3Width×Height×Depth = 361.6 mm× 179.6 mm×130.8 mm
Weigt4Package Excluded 3.9 kg ± 0.2 kg
Package Included 4.5 kg ± 0.5 kg
Calibration Interval
The recommended calibration interval is one year.
Regulatory Information
Electromagnetic Compatibility 2004/108/EC
Execution standard EN 61326-1:2006 EN 61326-2-1:2006
Safety UL 61010-1:2004; CAN/CSA-C22.2 NO. 61010-1-2004;
EN 61010-1:2001; IEC 61010-1:2001
Note: 1 Typical.
2 Maximum value with 20 ns, single-channel, dots display and auto memory depth.
3 Supporting legs and handle folded, knob height included.
4 Standard conguration.
RIGOL 8

RIGOL®is the registered trademark of RIGOL Technologies, Inc. Product information in this document subject to update without notice. For
the latest information about RIGOL's products, applications and services, please contact local RIGOL of ce or access RIGOL of cial website:
www.rigol.com October,2013
Ordering Information
Warranty
Three-year warranty,excluding probes and accessories.
Headquarter
RIGOL TECHNOLOGIES, INC.
No.156,Cai He Village,
Sha He Town,
Chang Ping District, Beijing,
102206 P.R.China
Tel:[phone]
Fax:[phone]
Email: [email protected]
USA
RIGOL TECHNOLOGIES
USA,INC.
7401 First Place,Suite N
Oakwood Village
OH 44146,USA
Tel/Fax: [phone]
Toll free: 877-4-RIGOL-1
Email: [email protected]
Europe
RIGOL TECHNOLOGIES EU,
GmbH
Lindbergh str. 4
82178 Puchheim, Germany
Tel: [phone]
Email: info-europe@
rigoltech.com
Description Order Number
Model 70MHz,2-channel DS2072A
70MHz,2-channel + 2-channel Signal Source DS2072A-S
100MHz,2-channel DS2102A
100MHz,2-channel + 2-channel Signal Source DS2102A-S
200MHz,2-channel DS2202A
200MHz,2-channel + 2-channel Signal Source DS2202A-S
300MHz,2-channel DS2302A
300MHz,2-channel + 2-channel Signal Source DS2302A-S
Standard Accessories Power Cord conforming to the standard of the country -
USB Data Cable CB-USBA-USBB-FF-150
2 Passive Probes (350 MHz) RP3300A
Quick Guide -
Resource CD (User’s Guide and Application Software) -
Optional Accessories Rack Mount Kit RM-DS2000A
Deep Memory Option 56Mpts(single channel)/28Mpts(dual channel) MEM-DS2000A
Advanced trigger functions Windows, Nth Edge,HDTV,Delay, Time Out,
Duration, USB
AT-DS2000A
Decoding Options RS232,I2C,SPI Decoding Kit SD-DS2000A
CAN Analysis kit(Trigger+Decoding) CAN-DS2000A