JDS Uniphase OTU-8000 User manual

JDSU OTU-8000
Optical Test Unit for ONMS 
Rack-based optical test unit for RFTS (Remote Fiber Test System)
User Manual

JDSU OTU-8000
Optical Test Unit for ONMS 
Rack-based optical test unit for RFTS (Remote Fiber Test System)
User Manual

User Manual 7OTU80010/06 v
Notice Every effort was made to ensure that the information in this document
was accurate at the time of printing. However, information is subject to
change without notice, and JDSU reserves the right to provide an
addendum to this document with information not available at the time
that this document was created.
Copyright © Copyright 2006 JDSU, LLC. All rights reserved. JDSU, Enabling
Broadband and Optical Innovation, and its logo are trademarks of
JDSU, LLC. All other trademarks and registered trademarks are the
property of their respective owners. No part of this guide may be repro-
duced or transmitted electronically or otherwise without written permis-
sion of the publisher.
Trademarks JDSU and OTU-8000 are trademarks or registered trademarks of JDSU
in the United States and/or other countries.
HP is a trademark or registered trademark of the Hewlett Packard
Company in the United States and/or other countries.
Microsoft, Windows, Windows CE, Windows NT, and Microsoft Internet
Explorer are either trademarks or registered trademarks of Microsoft
Corporation in the United States and/or other countries.
Netscape Navigator is a trademark or registered trademark of
Netscape Communications Corporation in the United States and other
countries.
Pentium is a trademark or registered trademark of the Intel Corporation
in the United States and/or other countries.
Solaris, Sun, Sun Microsystems, and Java are trademarks or registered
trademarks of Sun Microsystems, Inc. in the United States and/or other
countries.
Specifications, terms, and conditions are subject to change without
notice. All trademarks and registered trademarks are the property of
their respective companies.
Manual This guide is a product of JDSU's Technical Information Development
Department. This manual gives you the main information to install,start
and use the OTU-8000.
WEEE Directive Compliance JDSU has established processes in compliance with the Waste Elec-
trical and Electronic Equipment (WEEE) Directive, 2002/96/EC.

vi User Manual 7OTU80010/06
This product should not be disposed of as unsorted municipal waste
and should be collected separately and disposed of according to your
national regulations. In the European Union, all equipment purchased
from JDSU after 2005-08-13 can be returned for disposal at the end of
its useful life. JDSU will ensure that all waste equipment returned is
reused, recycled, or disposed of in an environmentally friendly manner,
and in compliance with all applicable national and international waste
legislation.
It is the responsibility of the equipment owner to return the equipment
to JDSU for appropriate disposal. If the equipment was imported by a
reseller whose name or logo is marked on the equipment, then the
owner should return the equipment directly to the reseller.
Instructions for returning waste equipment to JDSU can be found in the
Environmental section of JDSU’s web site at www.jdsu.com. If you have
questions concerning disposal of your equipment, contact JDSU’s
WEEE Program Management team at [email protected].

User Manual 7OTU80010/06 vii
Table of contents
About This Guide xi
Purpose and scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
Assumptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
Technical assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
Recycling Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Chapter 1 Prerequisites and delivery of the OTU-8000 1
Prerequisites of the OTU-8000 . . . . . . . . . . . . . . . . . . . . . . . . . . 2
General view of the prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
OTU-8000 and rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
19’’ and 23’’ rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
21’’ rack (ETSI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Use of the delivered screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Overall dimensions of the OTU-8000 in the racks . . . . . . . . . . . . . . . . . . 3
OTU-8000 Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
OTU-8000 Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Section of electric wires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
AC Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Patchcords & jumpers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Network Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
IP address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
SMTP address / E-mail notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Network access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
PSTN option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
GSM option and SIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Delivery of the OTU-8000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Delivery of the basic elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Table of contents
User Manual 7OTU80010/06 viii
Elements delivered on option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Rack option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
GSM Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
AC/DC Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
OTAU module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
OSX8000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
External Optical Switch (OSU-9600) Option . . . . . . . . . . . . . . . . . . . . . .11
Launch Fiber Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
OTDR Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Summary of the delivery and the prerequisites for an OTU-8000 13
General information on warranty . . . . . . . . . . . . . . . . . . . . . . . . . 15
Hardware Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Chapter 2 OTU-8000 General Description 17
Front Panel description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
LEDs description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Chapter 3 Installation of the OTU-8000 23
Installation for the GSM Option . . . . . . . . . . . . . . . . . . . . . . . . 24
Installation of the OTU-8000 into the rack . . . . . . . . . . . . . . . . . . 25
Fixing the OTU into the rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Setting the plexi protector onto the OTU-8000 . . . . . . . . . . . . . . . . . 26
Supply installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
-48 V DC or AC Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Dual power feed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Connector pin-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Installation of the Female Ground Connector . . . . . . . . . . . . . . . . . . 28
Installation of Ferrites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Procedure for switching on and off the OTU-8000 . . . . . . . . . . . . . . 28
OTAU ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Connecting ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Remote Optical Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
OSX8000 additional hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Installation of the OSX8000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Mounting the brackets for a 21’’ or 23’’ rack . . . . . . . . . . . . . . . . . . . . . 32
Fixing the OSX8000 into the rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Connecting the OSX8000 to the OTU-8000 . . . . . . . . . . . . . . . . . . . 33
Configurations of 1 OTDR and 36 ports . . . . . . . . . . . . . . . . . . . . . . 34
Configuration from 36 to 59 fibers . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Configuration with more than one OSX8000 . . . . . . . . . . . . . . . . . . 34
OSU-9600 additional hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Installation of the OSU-9600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Mounting the brackets for a 21’’ or 23’’ rack . . . . . . . . . . . . . . . . . . . . . 35
Fixing the OSU-9600 into the rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Connecting the OSU-9600 to the OTU-8000 . . . . . . . . . . . . . . . . . . 36
Configurations of 1 OTDR and 36 or 48 ports . . . . . . . . . . . . . . . . . 37
Configurations of 2 OTDRs and 36 or 48 testing ports . . . . . . . . . . . 37

Table of contents
User Manual 7OTU80010/06 ix
Higher configurations with one OTDR . . . . . . . . . . . . . . . . . . . . . . . 38
Configuration with 2 OSU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Configuration with up to 16 OSU . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Installation of the Launch Fiber Module . . . . . . . . . . . . . . . . . . . . 40
Installation of the Launch Fiber into the module . . . . . . . . . . . . . . . . 40
Installation of the module into the rack . . . . . . . . . . . . . . . . . . . . . . . 41
Changing the brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Fixing the Launc Fiber module into the rack . . . . . . . . . . . . . . . . . . . . . 42
Connecting the Launch Fiber Module . . . . . . . . . . . . . . . . . . . . . . . . 42
Description and use of the Relay option . . . . . . . . . . . . . . . . . . . 43
OTU-8000 and WEB Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Default configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
OTU-8000 Configuration via the Web Interface . . . . . . . . . . . . . . . . 45
Configuring the TCP/IP Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Configuring the modem (GSM or PSTN option) . . . . . . . . . . . . . . . . . . 45
Configuring OTDR plug-in(s) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Configuring the OSU-9600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Configuring the OSX8000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Adding one/several OSX8000 to one/several OSU-9600 . . . . . . . . . . . 53
Advanced mode for a single External Switch . . . . . . . . . . . . . . . . . . . . 55
Adding Remote Optical Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Configuring the optical switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Configuring the Relay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Displaying Mail Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Configuring Media Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Chapter 4 Web Interface 61
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
User Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Login . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Default login . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Login on welcome page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
General display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Menu frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Main frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Exploitation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Alarm Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Alarm monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Alarm types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Alarm severity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Testing and measuring a fiber under alarm . . . . . . . . . . . . . . . . . . . 67
Testing a fiber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Measuring a fiber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Displaying alarm details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
OTDR links status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Testing an OTDR link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Measuring an OTDR link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Table of contents
User Manual 7OTU80010/06 x
Performing a measurement on a fiber . . . . . . . . . . . . . . . . . . . . . . . 71
Performing a measurement with an OTU-8000 and Optical Remote
Switch(es) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Functions available with an OTDR trace . . . . . . . . . . . . . . . . . . . . . 72
Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Supervision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Testing IP with default values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Testing IP with specific values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Log files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Degraded mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Login change . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Changing settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Connected users - User disconnection . . . . . . . . . . . . . . . . . . . . . . . . . 76
Chapter 5 List of Alarms 79
Troubleshooting / Alarms Causes . . . . . . . . . . . . . . . . . . . . . . 80
Chapter 6 Technical Specifications 83
Base Unit Technical specifications . . . . . . . . . . . . . . . . . . . . . 84
Mechanical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Environmental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Relay contacts (Option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Optical switch technical specifications . . . . . . . . . . . . . . . . . . . . 85
Chapter 7 Options and accessories 87
OTU-8000 references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Mainframe / System Component / Test Sets . . . . . . . . . . . . . . . . . . 88
Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Optical switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
OTDR Plug-ins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Other Manuals available . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Index 93

User Manual 7OTU80010/06 xi
About This Guide
Topics discussed in this chapter are as follows:
–“Purpose and scope” page xii
–“Assumptions” page xii
–“Technical assistance” page xii
–“Recycling Information” page xiii
–“Conventions” page xiii

About This Guide
Purpose and scope
xii User Manual 7OTU80010/06
Purpose and scope
The purpose of this guide is to help you successfully use the OTU-8000
features and capabilities. This guide includes task-based instructions
that describe how to install, configure, use, and troubleshoot the OTU-
8000. Additionally, this guide provides a complete description of JDSU’s
warranty, services, and repair information, including terms and condi-
tions of the licensing agreement.
Assumptions
This guide is intended for novice, intermediate, and experienced users
who want to use the OTU-8000 effectively and efficiently. We are
assuming that you have basic computer and mouse/track ball experi-
ence and are familiar with basic telecommunication concepts and termi-
nology.
Technical assistance
If you need assistance or have questions related to the use of this
product, call or e-mail JDSU’s Technical Assistance Center for
customer support.
During off-hours, you can request assistance by doing one of the
following:
– leave a voice mail message at the Technical Assistance number in
your region
– e-mail North American Technical Assistance Center, [e-mail],
or European Technical Assistance Center,
[email protected]
– submit your question using our online Technical Assistance
Request form at www.jdsu.com.
Table 1 Technical assistance centers
Region Phone Number
Americas
Telecom Products
866 228 3762
World Wide: 301 353 1550 t[email protected]
Europe, Africa, and Mid-
East
[phone]
(Europe) hotline.euro[email protected]
Asia and the Pacific
Southeast Asia, Australia,
and New Zealand
[phone] tac.ap[email protected]
All others 866 228 3762 [email protected]

About This Guide
Recycling Information
User Manual 7OTU80010/06 xiii
Recycling Information
JDSU recommends that customers dispose of their instruments and
peripherals in an environnmentally sound manner. Potential methods
include reuse of parts or whole products and recycling of products
components, and/or materials.
Waste Electrical and electronic Equipment (WEEE) Directive
In the European Union, this label indicates that this product should not
be disposed of with household waste. Il should be deposited at an
appropriate facility to enable recovery and recycling.
Conventions
This guide uses naming conventions and symbols, as described in the
following tables.
Table 2 Typographical conventions
Description Example
User interface actions appear in
this typeface.
On the Status bar, click Start
Buttons or switches that you
press on a unit appear in this
TYPEFACE.
Press the ONswitch.
Code and output messages
appear in this typeface.
All results okay
Text you must type exactly as
shown appears in this type-
face.
Type: a:\set.exe in the dia-
log box.
Variables appear in this type-
face.
Type the new hostname.
Book references appear in this
typeface.
Refer to Newton’s Telecom
Dictionary
A vertical bar | means “or”: only
one option can appear in a sin-
gle command.
platform [a|b|e]
Square brackets [ ] indicate an
optional argument.
login [platform name]
Slanted brackets < > group
required arguments.
<password>

About This Guide
Conventions
xiv User Manual 7OTU80010/06
Table 4 Symbol conventions
Table 5 Safety definitions
Table 3 Keyboard and menu conventions
Description Example
A plus sign + indicates simulta-
neous keystrokes.
Press Ctrl+s
A comma indicates consecutive
key strokes.
Press Alt+f,s
A slanted bracket indicates
choosing a submenu from menu.
On the menu bar, click 
Start > Program Files.
This symbol represents a general hazard.
This symbol represents a risk of electrical shock.
NOTE
This symbol represents a Note indicating related information or tip.
This symbol, located on the equipment or its packaging, indicates
that the equipment must not be disposed of in a land-fill site or as
municipal waste, and should be disposed of according to your
national regulations.
WARNING
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.

1
User Manual 7OTU80010/06 1
Chapter 1 Prerequisites and delivery of
the OTU-8000
This chapter describes the prerequisites useful before installing/config-
uring the OTU-8000. It also give a detailed description of all the
elements you will receive according to the configuration asked during
the order.
Topics discussed in this chapter are as follows:
–“Prerequisites of the OTU-8000” on page 2
–“Delivery of the OTU-8000” page 7
–“Summary of the delivery and the prerequisites for an OTU-8000”
page 13
–“General information on warranty” on page 15

Chapter 1 Prerequisites and delivery of the OTU-8000
Prerequisites of the OTU-8000
2 User Manual 7OTU80010/06
Prerequisites of the OTU-8000
General view of the
prerequisites
OTU-8000 and rack
Specific conditions are required to install the OTU-8000 in a rack. There
are different conditions according to the type of rack used and wether
the OTU-8000 is delivered with a plexi protection cover or not.
19’’ and 23’’ rack – 19’’ or 23’’ rack (width 300 mm)
The door can be closed, whether the plexi protection cover is set on the
OTU-8000 or not.
21’’ rack (ETSI) – 21’’ (ETSI) rack (width 260 mm)
The door cannot be closed if the plexi protection cover is set onto the
OTU-8000.
Use of the delivered screws Milled screws are positioned on the plexi protection cover when:
– A ETSI 21’’ rack is used
– A 19’’ or 23’’ rack is used and no door is set on the rack.
Fig. 1 View of the prerequisites
Portable phone :
-SIM DATA card
-no PIN code
RJ 45
WORK STATION :
-Web Browser
RJ11
ODF :
-Patchcord length
SUPPLYING WIRES :
-Ø 1,5 mm
² max.

Option GSM modem
GSM antenna
+

Option PSTN modem
E-mail Server :
-SMTP address
ONMS SERVER
I P N E T W O R K
-IP address
-Subnet Mask
-Gatewa
y
48V Female Connector
CONVERTER AC - DC :
-With female connector
Relay
Connector
Male Ground
Connector
Female
Ground
Connecto
r

Chapter 1 Prerequisites and delivery of the OTU-8000
Prerequisites of the OTU-8000
User Manual 7OTU80010/06 3
If you wish to set and close a door on a 19’’ or 23’’ rack, replace the
milled screws with the countersunk ones:
1Remove manually the milled screws from the cover
2Use the screwdriver to fix the countersunk screws on the protection
cover.
Overall dimensions of the OTU-
8000 in the racks
Floor-space
NOTE
Using countersunk screws (M4) instead of milled screws decreases
the depth of the OTU-8000 from 9 mm. Use a POZI Screwdriver N°2.
Fig. 2 Rack 21’’ (ETSI)
240
72.2
Milled screws are used

Chapter 1 Prerequisites and delivery of the OTU-8000
Prerequisites of the OTU-8000
4 User Manual 7OTU80010/06
Fig. 3 Rack 19’’
Fig. 4 Rack 23’’
446
280
14.3
2U
Countersunk screws are used
280
32,2
Milled screws are used

Chapter 1 Prerequisites and delivery of the OTU-8000
Prerequisites of the OTU-8000
User Manual 7OTU80010/06 5
Height
The OTU-8000 occupies 2 rack units of space (2U). However,
according to the modules added to the equipment, the height can be
increased:
– + 1 OSU9600 module = + 4U
– + 2 OSU9600 module = + 8U
– + 1 OSX8000 module = 1U
– + 1 Launch Fiber Module = + 1U
OTU-8000 Power Supply
OTU-8000 Consumption Your local electrical installation must comply with the OTU-8000 power
consumption:
– DC Input: -36 to -60V
– Power consumption: 30W
Section of electric wires Electric wires plugging into the OTU-8000 must have a section inferior
or equal to 1,5mm².
AC Power supply The OTU-8000 works on -48V DC power. The OTU-8000 can be deliv-
ered with the specific AC to DC converter, if ordered as an option (Ref:
E98ACDCxx).
Fig. 5 Rack space with hardware extensions
1U
2U
4U
2U
OSU-9600 Module
Launch Fiber Module
OSX8000 Module
1U
2U

Chapter 1 Prerequisites and delivery of the OTU-8000
Prerequisites of the OTU-8000
6 User Manual 7OTU80010/06
In this case, the converter is already wired to a female 5-point
connector.
Converter specifications
AC Input: 100-240 V, 2A, 50-60 Hz
DC Output: -48V, 2.5 A
Patchcords & jumpers The jumpers used to connect the OTDR to the optical switch are
provided. Patchcords to the ODF are not supplied1.
Network Communication Make sure you have the correct cables, connectors and required infor-
mation to setup and configure the network access.
IP address To establish the communication between the OTU-8000 and the server,
you must get all necessary information concerning the IP address:
–IP address
–Subnet Mask
–Gateway
This information should be provided by your system manager.
SMTP address / E-mail
notification
You must get the SMTP address from your mail server. The OTU-8000
will use this information to send e-mails in case of alarm.
Fig. 6 Converter with female connector delivered
1.They may be ordered separately
NOTES
Connectors are SC type. PC or APC connectors are available.
One patchcord is necessary for each fiber to connect to a testing
port.
NOTE
Sending e-mail is only used when the server is not reachable.