Rigol DS70000 Series User manual

Guaranty and Declaration
Copyright
© 2021 RIGOL TECHNOLOGIES CO., LTD. All Rights Reserved.
Trademark Information
RIGOL®is the trademark of RIGOL TECHNOLOGIES CO., LTD.
Notices
• RIGOL products are covered by P.R.C. and foreign patents, issued and pending.
• RIGOL reserves the right to modify or change parts of or all the specifications and pricing
policies at the company's sole decision.
• Information in this publication replaces all previously released materials.
• Information in this publication is subject to change without notice.
• RIGOL shall not be liable for either incidental or consequential losses in connection with the
furnishing, use, or performance of this manual, as well as any information contained.
• Any part of this document is forbidden to be copied, photocopied, or rearranged without prior
written approval of RIGOL.
Product Certification
RIGOL guarantees that this product conforms to the national and industrial standards in China as
well as the ISO9001:2015 standard and the ISO14001:2015 standard. Other international standard
conformance certifications are in progress.
Contact Us
If you have any problem or requirement when using our products or this manual, please contact
RIGOL.
E-mail: ser[email protected]
Website:
http://www.rigol.com

Section Description Page
List of Figures...........................................................................................................................VIII
List of Tables.............................................................................................................................XIV
1 Safety Requirement............................................................................................. 1
1.1 General Safety Summary.......................................................................................................1
1.2 Safety Notices and Symbols.................................................................................................3
1.3 Measurement Category.........................................................................................................3
1.4 Ventilation Requirement........................................................................................................4
1.5 Working Environment.............................................................................................................4
1.6 Care and Cleaning....................................................................................................................6
1.7 Environmental Considerations............................................................................................ 6
1.8 Keep Hands Clear.....................................................................................................................7
2 Product Features ..................................................................................................8
3 Document Overview......................................................................................... 10
4 Quick Start............................................................................................................12
4.1 General Inspection................................................................................................................ 12
4.2 Appearance and Dimensions.............................................................................................12
4.3 To Prepare for Use.................................................................................................................13
4.3.1 To Connect to AC Power............................................................................................... 13
4.3.2 Turn-on Checkout............................................................................................................14
4.3.3 To Set the System Language....................................................................................... 15
4.3.4 To Connect the Probe.................................................................................................... 15
4.3.5 Function Inspection........................................................................................................17
4.3.6 Probe Compensation..................................................................................................... 19
4.4 Product Overview.................................................................................................................. 19
4.4.1 Front Panel Overview.....................................................................................................20
4.4.2 Rear Panel Overview.......................................................................................................22
4.4.3 User Interface....................................................................................................................25
4.4.4 Secondary 3.5-inch Touch Screen..............................................................................27
4.5 Touch Screen Gestures.........................................................................................................31
4.5.1 Tap........................................................................................................................................ 31
4.5.2 Pinch&Stretch...................................................................................................................32
Copyright ©RIGOL TECHNOLOGIES CO., LTD.
All rights reserved.
DS70000 User Guide
I

4.5.3 Drag .................................................................................................................................... 32
4.6 Parameter Setting Method.................................................................................................33
4.7 To Use the Built-in Help System....................................................................................... 39
4.8 To View the Option Information and the Option Installation................................40
5 To Set the Vertical System...............................................................................42
5.1 To Enable or Disable the Analog Channel.....................................................................42
5.2 To Adjust the Vertical Scale................................................................................................43
5.3 To Adjust the Vertical Offset..............................................................................................45
5.4 Channel Coupling..................................................................................................................46
5.5 BW Limit....................................................................................................................................46
5.6 Input Impedance....................................................................................................................47
5.7 Waveform Invert.................................................................................................................... 48
5.8 Probe..........................................................................................................................................49
5.9 Amplitude Unit.......................................................................................................................52
5.10 Bias ............................................................................................................................................ 53
5.11 Channel Delay.........................................................................................................................53
5.12 Channel Label..........................................................................................................................54
6 To Set the Horizontal System.........................................................................55
6.1 To Adjust the Horizontal Time Base ...............................................................................56
6.2 To Adjust the Horizontal Position.................................................................................... 56
6.3 Delayed Sweep....................................................................................................................... 57
7 To Set the Sample System...............................................................................59
7.1 Acquisition Mode.................................................................................................................. 59
7.2 Sampling Mode......................................................................................................................61
7.3 Sample Rate.............................................................................................................................61
7.4 Memory Depth.......................................................................................................................62
7.5 Anti-Aliasing............................................................................................................................64
7.6 Horizontal Expansion........................................................................................................... 64
7.7 XY Mode................................................................................................................................... 65
8 To Trigger the Oscilloscope............................................................................ 68
8.1 Trigger Source.........................................................................................................................68
8.2 Trigger Level............................................................................................................................ 69
8.3 Trigger Mode...........................................................................................................................70
8.4 Trigger Coupling.................................................................................................................... 71
8.5 Trigger Holdoff....................................................................................................................... 72
DS70000 User Guide
II
Copyright ©RIGOL TECHNOLOGIES CO., LTD.
All rights reserved.

8.6 Noise Rejection.......................................................................................................................73
8.7 Trigger Type.............................................................................................................................73
8.7.1 Edge Trigger...................................................................................................................... 73
8.7.2 Pulse Trigger......................................................................................................................75
8.7.3 Slope Trigger.....................................................................................................................79
8.7.4 Video Trigger.....................................................................................................................82
8.7.5 Pattern Trigger..................................................................................................................85
8.7.6 Duration Trigger...............................................................................................................88
8.7.7 Timeout Trigger................................................................................................................91
8.7.8 Runt Trigger.......................................................................................................................93
8.7.9 Window Trigger................................................................................................................96
8.7.10 Delay Trigger.....................................................................................................................99
8.7.11 Setup/Hold Trigger.......................................................................................................102
8.7.12 Nth Edge Trigger...........................................................................................................106
8.7.13 RS232 Trigger (Option)............................................................................................... 108
8.7.14 I2C Trigger (Option)..................................................................................................... 111
8.7.15 SPI Trigger (Option)......................................................................................................115
8.7.16 CAN Trigger (Option)...................................................................................................119
8.7.17 FlexRay Trigger (Option).............................................................................................123
8.7.18 LIN Trigger (Option).....................................................................................................126
8.7.19 I2S Trigger (Option)......................................................................................................129
8.7.20 MIL-STD-1553 Trigger (Option)............................................................................... 133
8.8 Trigger Output Connector................................................................................................138
9 Math Operation................................................................................................139
9.1 Arithmetic Operation.........................................................................................................141
9.2 Function Operation............................................................................................................ 144
9.3 FFT Operation.......................................................................................................................147
9.4 Logic Operation...................................................................................................................153
9.5 Digital Filter...........................................................................................................................156
10 Measure.............................................................................................................. 160
10.1 Measurement Parameter..................................................................................................160
10.1.1 Time Parameters............................................................................................................161
10.1.2 Count Values...................................................................................................................162
10.1.3 Delay and Phase Parameters.....................................................................................163
10.1.4 Voltage Parameters...................................................................................................... 165
Copyright ©RIGOL TECHNOLOGIES CO., LTD.
All rights reserved.
DS70000 User Guide
III

10.1.5 Other Parameters..........................................................................................................166
10.2 To Select the Measurement Item...................................................................................167
10.3 Measurement Settings...................................................................................................... 170
10.4 Remove the Measurement Results................................................................................174
10.5 Auto Measurement.............................................................................................................174
10.6 Cursor Measurement......................................................................................................... 176
10.6.1 Manual Mode.................................................................................................................177
10.6.2 Track Mode......................................................................................................................180
10.6.3 XY Mode...........................................................................................................................183
11 Digital Voltmeter (DVM)and Frequency Counter................................. 185
11.1 Digital Voltmeter (DVM)................................................................................................... 185
11.1.1 Measurement Settings................................................................................................186
11.1.2 Remove the Measurement.........................................................................................187
11.2 Frequency Counter............................................................................................................. 187
11.2.1 Measurement Settings................................................................................................188
11.2.2 Reset Statistics................................................................................................................189
11.2.3 Remove the Measurement.........................................................................................189
12 Real-time Eye Analysis (Option)................................................................. 190
12.1 To Enable or Disable the Eye Analysis Function....................................................... 191
12.2 To Select the Source of the Eye Diagram....................................................................191
12.3 Threshold Settings..............................................................................................................191
12.4 To Set Clock Recovery........................................................................................................192
12.5 To Set the Data Rate...........................................................................................................193
12.6 Eye Measurement Result.................................................................................................. 193
12.7 To Set the Display-related Parameters.........................................................................195
13 Jitter Analysis (Option)...................................................................................196
13.1 To Enable or Disable the Jitter Function......................................................................197
13.2 To Set Parameters................................................................................................................197
13.3 To View the Jitter Measurement.................................................................................... 198
14 Reference Waveform...................................................................................... 200
14.1 To Enable Ref Function......................................................................................................200
14.2 To Set the Reference Waveform.....................................................................................201
14.3 To Set the Ref Waveform Display.................................................................................. 201
14.4 Export and Import Operation......................................................................................... 202
15 Pass/Fail Test......................................................................................................205
DS70000 User Guide
IV
Copyright ©RIGOL TECHNOLOGIES CO., LTD.
All rights reserved.

15.1 To Enable or Disable the Pass/Fail Test Function..................................................... 205
15.2 To Start or Stop the Pass/Fail Test Operation............................................................206
15.3 To Select the Source...........................................................................................................206
15.4 Mask.........................................................................................................................................206
15.5 To Set the Output Form of the Test Results............................................................... 207
15.6 To Enable or Disable the Display of the Statistics of the Test Results...............208
16 RTSA (Option)................................................................................................... 209
16.1 Basic Settings........................................................................................................................209
16.1.1 FREQ.................................................................................................................................. 210
16.1.2 SPAN..................................................................................................................................211
16.1.3 BW......................................................................................................................................211
16.1.4 AMPT.................................................................................................................................212
16.2 Peak Search........................................................................................................................... 213
17 Protocol Decoding.......................................................................................... 215
17.1 Parallel Decoding................................................................................................................ 215
17.1.1 Clock Setting (CLK).......................................................................................................217
17.1.2 Bus Setting...................................................................................................................... 217
17.1.3 Display-related Setting............................................................................................... 218
17.1.4 Event Table .....................................................................................................................218
17.2 RS232 Decoding (Option)................................................................................................ 219
17.2.1 Source Setting................................................................................................................221
17.2.2 To Set Data Package.....................................................................................................222
17.2.3 Display-related Setting............................................................................................... 223
17.2.4 Event Table...................................................................................................................... 223
17.3 I2C Decoding (Option)...................................................................................................... 224
17.3.1 Source Setting................................................................................................................225
17.3.2 Display-related Setting............................................................................................... 226
17.3.3 Event Table...................................................................................................................... 226
17.4 SPI Decoding (Option).......................................................................................................228
17.4.1 To Set the Source.......................................................................................................... 229
17.4.2 To Set Mode and Data.................................................................................................229
17.4.3 Display-related Setting............................................................................................... 230
17.4.4 Event Table...................................................................................................................... 231
17.5 LIN Decoding (Option)......................................................................................................232
17.5.1 Signal Configuration....................................................................................................232
Copyright ©RIGOL TECHNOLOGIES CO., LTD.
All rights reserved.
DS70000 User Guide
V

17.5.2 Display-related Setting............................................................................................... 233
17.5.3 Event Table...................................................................................................................... 233
17.6 CAN Decoding (Option)....................................................................................................235
17.6.1 Signal Configuration....................................................................................................235
17.6.2 Display-related Setting............................................................................................... 237
17.6.3 Event Table...................................................................................................................... 237
17.7 FlexRay Decoding (Option)..............................................................................................239
17.7.1 Signal Configuration ...................................................................................................240
17.7.2 Display-related Setting............................................................................................... 241
17.7.3 Event Table...................................................................................................................... 241
17.8 I2S Decoding (Option).......................................................................................................242
17.8.1 Source Setting................................................................................................................243
17.8.2 Bus Setting...................................................................................................................... 244
17.8.3 Display-related Setting............................................................................................... 244
17.8.4 Event Table...................................................................................................................... 245
17.9 1553B Decoding (Option)................................................................................................ 246
17.9.1 To Set the Data Channel Source and the Threshold.........................................247
17.9.2 Display-related Setting............................................................................................... 247
17.9.3 Event Table...................................................................................................................... 247
18 Bus Analysis (Option)..................................................................................... 250
18.1 ETH Bus Analysis..................................................................................................................250
18.2 USB Bus Analysis................................................................................................................. 251
19 Multi-pane Windowing..................................................................................254
20 Waveform Recording and Playing............................................................. 256
20.1 Common Settings............................................................................................................... 256
20.2 Record Options....................................................................................................................257
20.3 Play Option............................................................................................................................258
21 Display Control.................................................................................................261
21.1 Display Type .........................................................................................................................261
21.2 Persistence Time..................................................................................................................262
21.3 Intensity..................................................................................................................................262
21.4 To Set the Screen Grid.......................................................................................................263
21.5 Display Setting..................................................................................................................... 263
21.6 Show Scale.............................................................................................................................263
21.7 Color Grade...........................................................................................................................263
DS70000 User Guide
VI
Copyright ©RIGOL TECHNOLOGIES CO., LTD.
All rights reserved.

21.8 Waveform Freeze.................................................................................................................263
22 Storage................................................................................................................ 265
22.1 To Enter the Storage Menu..............................................................................................265
22.2 To Save a File.........................................................................................................................265
22.2.1 Save Image......................................................................................................................265
22.2.2 Save Wave........................................................................................................................267
22.2.3 Save Setup.......................................................................................................................269
22.2.4 Binary Data Format (.bin)...........................................................................................271
22.3 Load a File..............................................................................................................................274
22.4 System Upgrade.................................................................................................................. 275
22.5 Disk Management...............................................................................................................276
22.6 Factory Settings................................................................................................................... 278
23 System Utility Function Setting.................................................................. 286
23.1 I/O Setting............................................................................................................................. 286
23.2 Object Missing..................................................................................................................... 288
23.3 About this Oscilloscope....................................................................................................289
23.4 Other Setting........................................................................................................................ 289
23.5 SelfCal......................................................................................................................................290
23.6 Option List............................................................................................................................. 290
23.7 Quick Settings...................................................................................................................... 291
23.8 Self-check...............................................................................................................................293
24 Remote Control................................................................................................297
24.1 Remote Control via USB .................................................................................................. 298
24.2 Remote Control via LAN...................................................................................................298
24.3 Remote Control via GPIB..................................................................................................299
25 Troubleshooting...............................................................................................301
26 Appendix............................................................................................................ 303
26.1 Appendix A: Options and Accessories.........................................................................303
26.2 Appendix B Warranty ........................................................................................................304
Copyright ©RIGOL TECHNOLOGIES CO., LTD.
All rights reserved.
DS70000 User Guide
VII

List of Figures
Figure 4.1 Front View ..............................................................................................................12
Figure 4.2 Side View ................................................................................................................13
Figure 4.3 To Connect to AC Power ...................................................................................14
Figure 4.4 To Connect the Passive Probe ........................................................................ 15
Figure 4.5 To Connect the Probe Head to the PA of the Active Probe ................. 16
Figure 4.6 To Connect the Active Probe .......................................................................... 17
Figure 4.7 To Use the Compensation Signal .................................................................. 18
Figure 4.8 Waveform Signal .................................................................................................18
Figure 4.9 Probe Compensation .........................................................................................19
Figure 4.10 Front Panel ..........................................................................................................20
Figure 4.11 Rear Panel ............................................................................................................22
Figure 4.12 User Interface .....................................................................................................25
Figure 4.13 Smart Quick-Responsive Keyboard Interface ......................................... 28
Figure 4.14 Flip Screen Adjustment Interface ................................................................30
Figure 4.15 Tap Gesture .........................................................................................................32
Figure 4.16 Pinch&Stretch Gesture ....................................................................................32
Figure 4.17 Drag Gesture ......................................................................................................33
Figure 4.18 English Input Interface ....................................................................................34
Figure 4.19 Chinese Input Interface .................................................................................. 35
Figure 4.20 String Keypad .....................................................................................................37
Figure 4.21 Numeric Keypad ................................................................................................38
Figure 4.22 Help Information .............................................................................................. 39
Figure 5.1 Vertical Menu for Channel ...............................................................................42
Figure 5.2 Input Impedance Modification .......................................................................48
Figure 5.3 Waveform Invert ..................................................................................................49
Figure 5.4 Probe Setting Menu ...........................................................................................49
Figure 5.5 RP7000/PVA7000/PVA8000 Series Probe Setting Menu .......................50
DS70000 User Guide
VIII
Copyright ©RIGOL TECHNOLOGIES CO., LTD.
All rights reserved.

Figure 5.6 SelfCal ..................................................................................................................... 52
Figure 5.7 Zero Offset ............................................................................................................ 54
Figure 6.1 Horizontal System Menu ..................................................................................55
Figure 6.2 Delayed Sweep Mode ........................................................................................58
Figure 7.1 Horizontal System Menu ..................................................................................59
Figure 7.2 Memory Depth .................................................................................................... 63
Figure 7.3 XY Setting Menu ................................................................................................. 65
Figure 7.4 Measurement Schematic Diagram of Phase Deviation ......................... 66
Figure 8.1 Schematic Diagram of the Acquisition Memory ......................................70
Figure 8.2 Trigger Holdoff .....................................................................................................72
Figure 8.3 Edge Trigger Setting Menu ..............................................................................74
Figure 8.4 Positive Pulse Width/Negative Pulse Width ..............................................76
Figure 8.5 Pulse Trigger Setting Menu .............................................................................77
Figure 8.6 Positive Slope Time/Negative Slope Time ................................................. 79
Figure 8.7 Slope Trigger Setting Menu ............................................................................ 80
Figure 8.8 Video Trigger Setting Menu ............................................................................83
Figure 8.9 Pattern Trigger ..................................................................................................... 86
Figure 8.10 Pattern Trigger Setting Menu .......................................................................86
Figure 8.11 Duration Trigger ................................................................................................88
Figure 8.12 Duration Trigger Setting Menu ....................................................................89
Figure 8.13 Timeout Trigger .................................................................................................91
Figure 8.14 Timeout Trigger Menu ....................................................................................92
Figure 8.15 Runt Trigger ........................................................................................................94
Figure 8.16 Runt Trigger Setting Menu ............................................................................94
Figure 8.17 Window Trigger Setting Menu .....................................................................97
Figure 8.18 Delay Trigger ......................................................................................................99
Figure 8.19 Delay Trigger Setting Menu ....................................................................... 100
Figure 8.20 Setup/Hold Trigger ........................................................................................103
Figure 8.21 Setup/Hold Trigger Setting Menu ............................................................104
Copyright ©RIGOL TECHNOLOGIES CO., LTD.
All rights reserved.
DS70000 User Guide
IX

Figure 8.22 Nth Edge Trigger ............................................................................................ 106
Figure 8.23 Nth Edge Trigger Setting Menu ................................................................107
Figure 8.24 Schematic Diagram of RS232 Protocol ...................................................109
Figure 8.25 RS232 Trigger Setting Menu ...................................................................... 109
Figure 8.26 Schematic Diagram of I2C Protocol .........................................................111
Figure 8.27 I2C Trigger Setting Menu ............................................................................ 112
Figure 8.28 Bin Format Setting .........................................................................................114
Figure 8.29 Hex Format Setting ....................................................................................... 114
Figure 8.30 Sequential Chart of SPI Bus ........................................................................116
Figure 8.31 SPI Trigger Setting Menu ............................................................................ 116
Figure 8.32 Data Frame Format of the CAN Bus ........................................................ 119
Figure 8.33 CAN Trigger Setting Menu ..........................................................................120
Figure 8.34 Sample Position ..............................................................................................121
Figure 8.35 Frame Format of FlexRay Bus .................................................................... 123
Figure 8.36 FlexRay Trigger Setting Menu ....................................................................124
Figure 8.37 Data Frame Format of the LIN Bus .......................................................... 126
Figure 8.38 LIN Trigger Setting Menu ............................................................................127
Figure 8.39 Sample Position ..............................................................................................128
Figure 8.40 Sequential Chart of I2S Bus ........................................................................130
Figure 8.41 I2S Trigger Setting Menu .............................................................................130
Figure 8.42 Formats of the Command Word, Data Word, and Status Word of
the 1553B Bus ....................................................................................................................134
Figure 8.43 MIL-STD-1553 Trigger Setting Menu ......................................................135
Figure 9.1 Math Operation Menu ....................................................................................140
Figure 9.2 Waveform Display Window of the Operation Results .........................141
Figure 9.3 Arithmetic Operation Menu ..........................................................................142
Figure 9.4 Operation Result Display Window ..............................................................143
Figure 9.5 Function Operation Menu .............................................................................145
Figure 9.6 Operation Result Display Window ..............................................................146
DS70000 User Guide
X
Copyright ©RIGOL TECHNOLOGIES CO., LTD.
All rights reserved.

Figure 9.7 FFT Operation Menu ....................................................................................... 148
Figure 9.8 FFT Operation Window .................................................................................. 149
Figure 9.9 Peak Search .........................................................................................................152
Figure 9.10 Logic Operation Menu .................................................................................153
Figure 9.11 Operation Result Display Window ........................................................... 155
Figure 9.12 Digital Filter Menu .........................................................................................157
Figure 9.13 Operation Result Display Window ........................................................... 158
Figure 10.1 Time Parameters .............................................................................................161
Figure 10.2 Delay and Phase Parameters ......................................................................163
Figure 10.3 Voltage Parameters ....................................................................................... 165
Figure 10.4 Vertical Measurement Items ...................................................................... 168
Figure 10.5 Horizontal Measurement Items ................................................................ 169
Figure 10.6 Other Measurement Items ..........................................................................170
Figure 10.7 Measurement Settings ................................................................................. 171
Figure 10.8 Cursor .................................................................................................................176
Figure 10.9 Cursor Measurement Result .......................................................................177
Figure 10.10 Manual Mode Setting Menu ....................................................................178
Figure 10.11 Manual Cursor Measurement Example ................................................180
Figure 10.12 Track Mode Setting Menu ........................................................................ 181
Figure 10.13 Track Measurement (before Horizontal Expansion) ........................ 182
Figure 10.14 Track Measurement (after Horizontal Expansion) ............................183
Figure 10.15 XY Mode ......................................................................................................... 183
Figure 11.1 DVM Setting Menu ........................................................................................186
Figure 11.2 Frequency Counter Setting Menu ............................................................188
Figure 12.1 Eye Diagram Setting Menu .........................................................................190
Figure 12.2 Eye Measurement Result .............................................................................191
Figure 12.3 Diagram of Eye Measurement Parameters ............................................194
Figure 13.1 Jitter Setting Menu ........................................................................................196
Figure 14.1 Reference Waveform Menu ........................................................................200
Copyright ©RIGOL TECHNOLOGIES CO., LTD.
All rights reserved.
DS70000 User Guide
XI

Figure 14.2 Disk Management Interface .......................................................................203
Figure 15.1 Pass/Fail Test Menu ....................................................................................... 205
Figure 16.1 Basic Setting Menu ........................................................................................209
Figure 16.2 Peak Search Menu ......................................................................................... 213
Figure 17.1 Schematic Diagram of Parallel Decoding .............................................. 216
Figure 17.2 Parallel Decoding Menu .............................................................................. 216
Figure 17.3 Parallel Decoding Event Table ....................................................................219
Figure 17.4 Schematic Diagram of RS232 Serial Bus ................................................ 220
Figure 17.5 Schematic Diagram of Negative Logic ................................................... 220
Figure 17.6 RS232 Decoding Menu ................................................................................ 221
Figure 17.7 RS232 Decoding Event Table ..................................................................... 224
Figure 17.8 I2C Serial Bus ...................................................................................................224
Figure 17.9 I2C Decoding Menu ...................................................................................... 225
Figure 17.10 I2C Decoding Event Table .........................................................................227
Figure 17.11 SPI Serial Bus .................................................................................................228
Figure 17.12 SPI Decoding Menu ....................................................................................228
Figure 17.13 SPI Decoding Event Table ......................................................................... 231
Figure 17.14 LIN Decoding Menu ....................................................................................232
Figure 17.15 LIN Decoding Event Table .........................................................................234
Figure 17.16 CAN Decoding Menu ................................................................................. 235
Figure 17.17 Sample Position ............................................................................................236
Figure 17.18 CAN Decoding Event Table ...................................................................... 238
Figure 17.19 FlexRay Decoding Menu ........................................................................... 239
Figure 17.20 Sample Position ............................................................................................240
Figure 17.21 FlexRay Decoding Event Table ................................................................ 241
Figure 17.22 I2S Decoding Menu .................................................................................... 243
Figure 17.23 I2S Decoding Event Table ......................................................................... 245
Figure 17.24 1553B Decoding Menu ..............................................................................246
Figure 17.25 1553B Decoding Event Table ...................................................................248
DS70000 User Guide
XII
Copyright ©RIGOL TECHNOLOGIES CO., LTD.
All rights reserved.

Figure 18.1 ETH Bus Analysis Configuration Menu ...................................................250
Figure 18.2 USB Bus Analysis Configuration Menu ...................................................252
Figure 19.1 "Add Window" Interface ..............................................................................254
Figure 20.1 Waveform Recording Interface ................................................................. 256
Figure 20.2 Play Operation Interface ..............................................................................259
Figure 21.1 Display Setting Menu ................................................................................... 261
Figure 21.2 Vector Display ..................................................................................................262
Figure 22.1 Image Saving Setting Menu .......................................................................266
Figure 22.2 Waveform Saving Setting Menu ...............................................................268
Figure 22.3 Setup Saving Setting Menu ........................................................................270
Figure 22.4 Load Setting Menu ........................................................................................275
Figure 22.5 Upgrade Menu ................................................................................................276
Figure 22.6 Disk Management Interface .......................................................................277
Figure 23.1 Self-calibration Menu ................................................................................... 290
Figure 23.2 Quick Settings Menu .................................................................................... 291
Figure 23.3 Key Test Interface ...........................................................................................293
Figure 23.4 Touch Screen Test Interface ........................................................................294
Figure 23.5 Touch-Enabled Gesture Operation Interface ........................................295
Figure 23.6 Board Test Interface .......................................................................................296
Figure 24.1 Search for the Available Device .................................................................300
Figure 24.2 Confirm the Available Device .....................................................................300
Copyright ©RIGOL TECHNOLOGIES CO., LTD.
All rights reserved.
DS70000 User Guide
XIII

List of Tables
Table 5.1 BW Limit ...................................................................................................................47
Table 5.2 Probe Ratio ..............................................................................................................50
Table 8.1 Video Standard ...................................................................................................... 84
Table 9.1 Window Function ................................................................................................150
Table 9.2 Logic Operation .................................................................................................. 154
Table 17.1 Bus Setting ..........................................................................................................217
Table 22.1 File Header ..........................................................................................................271
Table 22.2 Waveform Header ............................................................................................272
Table 22.3 Waveform Data Header ................................................................................. 273
Table 22.4 Factory Settings ................................................................................................278
DS70000 User Guide
XIV
Copyright ©RIGOL TECHNOLOGIES CO., LTD.
All rights reserved.

1 Safety Requirement
1.1 General Safety Summary
Please review the following safety precautions carefully before putting the instrument
into operation so as to avoid any personal injury or damage to the instrument and
any product connected to it. To prevent potential hazards, please follow the
instructions specified in this manual to use the instrument properly.
•Use Proper Power Cord.
Only the exclusive power cord designed for the instrument and authorized for
use within the local country could be used.
•Ground the Instrument.
The instrument is grounded through the Protective Earth lead of the power cord.
To avoid electric shock, it is essential to connect the earth terminal of the power
cord to the Protective Earth terminal before connecting any inputs or outputs.
•Connect the Probe Correctly.
If a probe is used, the probe ground lead must be connected to earth ground.
Do not connect the ground lead to high voltage. Improper way of connection
could result in dangerous voltages being present on the connectors, controls or
other surfaces of the oscilloscope and probes, which will cause potential hazards
for operators.
•Observe All Terminal Ratings.
To avoid fire or shock hazard, observe all ratings and markers on the instrument
and check your manual for more information about ratings before connecting
the instrument.
•Use Proper Overvoltage Protection.
Ensure that no overvoltage (such as that caused by a bolt of lightning) can reach
the product. Otherwise, the operator might be exposed to the danger of an
electric shock.
•Do Not Operate Without Covers.
Do not operate the instrument with covers or panels removed.
•Do Not Insert Objects Into the Air Outlet.
Do not insert objects into the air outlet, as doing so may cause damage to the
instrument.
•Use Proper Fuse.
Please use the specified fuses.
Safety Requirement
Copyright ©RIGOL TECHNOLOGIES CO., LTD.
All rights reserved.
DS70000 User Guide
1

•Avoid Circuit or Wire Exposure.
Do not touch exposed junctions and components when the unit is powered.
•Do Not Operate With Suspected Failures.
If you suspect damage occurs to the instrument, have it inspected by RIGOL
authorized personnel before further operations. Any maintenance, adjustment or
replacement especially to circuits or accessories must be performed by RIGOL
authorized personnel.
•Keep Well Ventilation.
Inadequate ventilation may cause an increase of instrument temperature which
would cause damage to the instrument. So please keep the instrument well
ventilated and inspect the intake and fan regularly.
•Do Not Operate in Wet Conditions.
In order to avoid short circuiting to the interior of the device or electric shock,
please do not operate the instrument in a humid environment.
•Do Not Operate in an Explosive Atmosphere.
In order to avoid damage to the device or personal injuries, it is important to
operate the device away from an explosive atmosphere.
•Keep Instrument Surfaces Clean and Dry.
To avoid dust or moisture from affecting the performance of the instrument,
keep the surfaces of the instrument clean and dry.
•Prevent Electrostatic Impact.
Operate the instrument in an electrostatic discharge protective environment to
avoid damage induced by static discharges. Always ground both the internal and
external conductors of cables to release static before making connections.
•Use the Battery Properly.
Do not expose the battery (if available) to high temperature or fire. Keep it out of
the reach of children. Improper change of a battery (lithium battery) may cause
an explosion. Use the RIGOL specified battery only.
•Handle with Caution.
Please handle with care during transportation to avoid damage to keys, knobs,
interfaces, and other parts on the panels.
Warning
Equipment meeting Class A requirements may not offer adequate protection to broadcast
services within residential environment.
Safety Requirement
DS70000 User Guide
2
Copyright ©RIGOL TECHNOLOGIES CO., LTD.
All rights reserved.

1.2 Safety Notices and Symbols
Safety Notices in this Manual:
Warning
Indicates a potentially hazardous situation or practice which, if not avoided, will result in
serious injury or death.
Caution
Indicates a potentially hazardous situation or practice which, if not avoided, could result
in damage to the product or loss of important data.
Safety Terms on the Product:
•DANGER
It calls attention to an operation, if not correctly performed, could result in injury
or hazard immediately.
•WARNING
It calls attention to an operation, if not correctly performed, could result in
potential injury or hazard.
•CAUTION
It calls attention to an operation, if not correctly performed, could result in
damage to the product or other devices connected to the product.
Safety Symbols on the Product:
Hazardous
Voltage
Safety Warning Protective Earth
Terminal
Chassis Ground Test Ground
1.3 Measurement Category
Measurement Category
This instrument can make measurements in Measurement Category I.
Warning
This instrument can only be used for measurements within its specified measurement
categories.
Safety Requirement
Copyright ©RIGOL TECHNOLOGIES CO., LTD.
All rights reserved.
DS70000 User Guide
3

Measurement Category Definitions
•Measurement category I is for measurements performed on circuits not directly
connected to MAINS. Examples are measurements on circuits not derived from
MAINS, and specially protected (internal) MAINS derived circuits. In the latter
case, transient stresses are variable. Thus, you must know the transient withstand
capability of the equipment.
•Measurement category II is for measurements performed on circuits directly
connected to low voltage installation. Examples are measurements on household
appliances, portable tools and similar equipment.
•Measurement category III is for measurements performed in the building
installation. Examples are measurements on distribution boards, circuit-breakers,
wiring (including cables, bus-bars, junction boxes, switches and socket-outlets) in
the fixed installation, and equipment for industrial use and some other
equipment. For example, stationary motors with permanent connection to a
fixed installation.
•Measurement category IV is for measurements performed at the source of a
low-voltage installation. Examples are electricity meters and measurements on
primary overcurrent protection devices and ripple control units.
1.4 Ventilation Requirement
This instrument uses a fan to force cooling. Please make sure that the air inlet and
outlet areas are free from obstructions and have free air. When using the instrument
in a bench-top or rack setting, provide at least 10 cm clearance beside, above and
behind the instrument for adequate ventilation.
Caution
Inadequate ventilation may cause an increase of temperature in the instrument, which
would cause damage to the instrument. So please keep the instrument well ventilated and
inspect the air outlet and the fan regularly.
1.5 Working Environment
Temperature
Operating: 0℃ to +50℃
Non-operating: -30℃ to +70℃
Humidity
•Operating:
Below +30℃: ≤90%RH (without condensation)
+30℃ to +40℃: ≤75% RH (without condensation)
Safety Requirement
DS70000 User Guide
4
Copyright ©RIGOL TECHNOLOGIES CO., LTD.
All rights reserved.