ring Pathlight User manual

Pathlight
Smart Lighting

1. Set up your Pathlight. Download the Ring app.
The app walks you through setting up and managing your Ring Pathlight.
Search for “Ring” in one of these app stores, or visit: ring.com/app
Set up your Ring Bridge.
The Bridge connects your Ring Smart Lights
to the Ring app and the rest of your Ring
devices.
To set up your Bridge, follow the instructions
in the Ring app or the Bridge user manual.
Download from
Windows Store
3

Smart Lights
Alarm
Doorbells
Security Cams
Chimes
Set up your Pathlight in the Ring app.
In the app, tap Set Up a Device.
When prompted, select Smart Lights and follow the in-app instructions.
Once setup is complete, slide the battery cover back onto your Pathlight.
Insert the batteries.
Push in the lock button on the front of your Pathlight, and slide o the battery cover.
Then insert four D Cell batteries (not included), flat end first, into the battery compartment.
54

2. Install your Pathlight.
If you’re installing multiple Pathlights, space them
5-7 feet apart for the best motion sensing performance.
Place the stake.
Gently drive the stake into the ground at
your chosen location.
Make sure the “Sensor Direction” arrow
is pointing toward the area you want to
monitor for motion.
Attach your Pathlight.
Lower your Pathlight onto the stake and
twist clockwise until it clicks to lock it into
place.
7

For additional help, visit: ring.com/help
Or give us a call…
US 1 800 656 1918
Canada 1 855 300 7289
Worldwide [phone]
To review your warranty coverage, please visit www.ring.com/warranty.
Patents: www.ring.com/patents
© 2019 Ring LLC or its aliates.
RING, ALWAYS HOME, and all related logos are trademarks of Ring LLC or its aliates.
Last updated: 01/04/19
For a list of all our customer support numbers, visit: ring.com/callus