ring Steplight User manual

Steplight
Smart Lighting

1. Set up your Steplight.
Download the Ring app.
The app walks you through setting up and managing
your Ring Steplight.
Search for “Ring” in one of these app stores, or visit:
ring.com/app
Set up your Ring Bridge.
The Bridge connects your Ring Smart Lights to the Ring
app and the rest of your Ring devices.
To set up your Bridge, follow the instructions in the Ring
app or the Bridge user manual.
Download from
Windows Store
32

Smart Lights
Alarm
Doorbells
Security Cams
Chimes
Set up your Steplight in the Ring app.
In the app, tap Set Up a Device.
When prompted, select Smart Lights and follow the
in-app instructions.
Insert the batteries.
Using a flathead
screwdriver, remove the
screws from the back and
lift o the battery lid.
Then insert three C Cell
batteries (not included),
matching the flat ends with
the springs.
54

2. Install your Steplight.
Insert screws.
Drive the two mounting screws, leaving ~1/4” exposed.
Attach the lid.
Push the lid back onto your
Steplight, and secure it with the
screws you removed earlier.
Mount Steplight.
Place your Steplight over
the mounting screws and
slide downward to lock it
in place.
Mark the spots.
Mark the screw holes.
Using the guide below, make a mark on the mounting
surface below each arrow.
If installing on a masonry surface, drill pilot holes and
insert the included anchors.
7

For additional help, visit: ring.com/help
Or give us a call…
US 1 800 656 1918
Canada 1 855 300 7289
Worldwide [phone]
To review your warranty coverage, please visit www.ring.com/warranty.
Patents: www.ring.com/patents
© 2019 Ring LLC or its aliates.
RING, ALWAYS HOME, and all related logos are trademarks of Ring LLC or its aliates.
Last updated: 01/04/19
For a list of all our customer support numbers, visit:
ring.com/callus