ring Spotlight Cam Wired User manual

Spotlight Cam Wired

1. Set up your
Spotlight
Cam in the
Ring app.
Download the Ring app
The Ring app will walk you
through setting up and
managing your Spotlight Cam.
Search for “Ring” in one of the
app stores below, or visit:
ring.com/app.
Download from
Windows Store
Your Wi-Fi password
Grab your Wi-Fi password
It’s required for the in-app setup. Write
it down below so it’s handy when you
need it:
32

Plug your Spotlight Cam
into a power outlet
Plug your Spotlight Cam into an outlet
in the same room as your Wi-Fi router
to set it up.
Spotlight Cam Wired
Spotlight Cam Battery
Set up your Spotlight Cam
in the Ring app
In the Ring app, select Set Up Device
and follow the in-app instructions.
54

Try it out!
After setup, select the Live View button
to see video from the camera in the
Ring app.
White light flashing?
If the light on the bottom of your
Spotlight Cam is flashing after setup,
it’s updating its internal software.
The light will stop flashing when the
update is completed. This update can
take up to a few minutes.
76

Test video quality outside
Now, unplug your Spotlight Cam and
take it outside to where you want to
install it. Plug Spotlight Cam into an
outdoor outlet and test video quality
again.
2. Install your
Spotlight Cam
on the wall.
98

Screwdriver
Use the screwdriver handle to
hold the provided bit.
Phillips Bit
Use the Phillips bit for installing
the mounting bracket and
tightening the security screw.
Drill Bit
Use this to pre-drill holes if
installing on a masonry surface,
such as stucco or brick.
Mounting Bracket
Attach this to the wall first,
then slot Spotlight Cam into
the mounting bracket. It also
features a built-in level.
Before you begin
This is everything you’ll need to install
your Spotlight Cam.
Install Screws (5)
Use these to install the mounting
bracket on your wall.
Wall Anchors (16)
Use these to attach the mounting
bracket and the cable clips to your
wall, if installing on a masonry surface,
such as stucco or brick.
Cable Clips (11)
Use these to attach the power cable
to your wall.
1110

Motion
Detector
Lights
Install
Screws
Mounting
Bracket
Security
Screw
Wire
Clip
Setup
Button
How it all fits together
1312

30 feet (10 Meters)
9 feet
(3 Meters)
Parallel to ground
Select an install height
When mounted at 9 feet off the
ground, with the motion detector
parallel to the ground, the motion
sensor is optimized to detect human-
sized objects at up to 30 feet.

Install the mounting
bracket
Use the built-in level to make sure
your Spotlight Cam will be level before
marking your holes.
If installing on a masonry surface,
first drill holes using the provided
drill bit. Insert the wall anchors before
installing the screws.
If installing on a wood surface, use the
install screws to screw the mounting
bracket directly into your wall.
1716

Attach the base of Spotlight
Cam to the mounting
bracket
Slot the base down to lock it to the
mounting bracket.
1918

Tighten the security screw
Using the Phillips end of the
screwdriver bit, tighten the security
screw on the right until your Spotlight
Cam is secure.
2120

Secure the cable
Use the provided cable clips to secure
the cable on your wall.
Use the included drill bit to pre-
drill holes in the wall and insert the
provided anchors first if installing on a
masonry surface, like stucco or brick.
The power cable can be
painted to match the wall.
2322

Plug Spotlight Cam in
If Spotlight Cam is not already
plugged into a power outlet, plug it in
now.
If you’ve already completed the in-
app setup, wait about a minute for
Spotlight Cam to power up and come
back online.
2524

Adjust the camera angle
To ensure accurate motion detection,
position the camera with the motion
detector parallel to the ground.
Tighten the side screw on the left to
secure the camera position.
2726

??ring.com/help
[phone]
[phone]
Singel 542
1017 AZ Amsterdam
The Netherlands
© 2020 Ring LLC or its affiliates.
Ring and all related logos are trademarks of Ring LLC or its affiliates.