ring Stick Up Cam Plug-In User manual

Stick Up Cam Plug-In
02_Stick_Up_Cam_Plug-in_MANUAL_BETA.indd 1 6/6/19 2:49 PM

1. Set up your Stick Up Cam.
Download the Ring app.
The Ring app walks you through setting up and managing your Stick Up Cam.
Search for “Ring” in one of the app stores below, or visit: ring.com/app
Grab your Wi-Fi password.
You’ll need it to set up your Stick Up Cam.
Write it down below so it’s handy when you need it:
Power it up!
First, plug the included power cable into
the back of your Stick Up Cam.
Then plug the power supply into an outlet.
Set up your Stick Up Cam in the Ring app.
In the Ring app, select Set Up a Device.
When prompted, select Security Cams and follow the in-app instructions.
Try it out!
After setup, tap the Live View button in the Ring app to see live video from
your Stick Up Cam.
Blue light flashing?
If the light on the front of your Stick Up Cam is flashing after setup, it’s
updating its software.
Do not unplug your Stick Up Cam while the light is flashing!
Download from
Windows Store
02_Stick_Up_Cam_Plug-in_MANUAL_BETA.indd 3 6/6/19 2:49 PM

2. Install your Stick Up Cam. How to use Stick Up Cam
on a table or shelf:
Choose a location.
Stick Up Cam is happy just about anywhere, indoors or out. It comes ready
to sit on a flat surface like a table or shelf, but can also be mounted to a wall.
Choose a spot where it can provide the view you want, within reach of a
power outlet.
Table or shelf Mounted on a wall
It’s all ready, already!
Plug it in, then place it at your chosen location. Your Stick Up Cam is now
ready to protect you.
Once you’re done, check out the live video in the Ring app to make sure
you have the view you want.
If you’d like a downward camera angle...
Swivel the base around so that the long side faces the front, then tilt your
Stick Up Cam so it points downward.
112 3
54
02_Stick_Up_Cam_Plug-in_MANUAL_BETA.indd 5 6/6/19 2:49 PM

How to install Stick Up Cam
on a wall:
Remove the base.
Unscrew it using a Phillips-head screwdriver (not included).
Re-attach the base.
Screw it into the back of your Stick Up Cam
with the “UP” arrow on the bracket pointing
upward.
Remove the mounting bracket.
Slide it down. It’ll come right o the base.
Drive the screws.
Hold the bracket against your
wall, making sure the “UP” arrow
is pointing upward, and mount it
with the included screws.
Mount your Cam.
Guide the grooves in the base onto the hooks
on the bracket. Slide Stick Up Cam down to
secure it to the wall.
Now check out the live video in the Ring app
to make sure you have the view you want.
76
02_Stick_Up_Cam_Plug-in_MANUAL_BETA.indd 7 6/6/19 2:49 PM

© 2019 Ring LLC or its affiliates.
Ring and all related logos are trademarks of Ring LLC or its affiliates.
Last updated: 06/06/19
02_Stick_Up_Cam_Plug-in_MANUAL_BETA.indd 8 6/6/19 2:49 PM