Riverside Furniture 65245 User manual

Riverside
FURNITURE
email: [email protected]
Made in Viet Nam
Page 1 of 3
60- IN TV Console
#65245
Allegheny Entertainment
TV Console
Assembly Instructions
1 pc. 1 pc. 1 pc.
4 pcs. 1 pc.
4 pcs.
1 pc.
1pc. 1 pc.
Be sure to check all packing material carefully for small parts, which may have come loose inside the carton
during shipment. Separate, count and check all parts against the Components and Hardware List above. Failure
to use the correct length bolts in the proper locations may result in an unsafe product and could also cause damage to the
parts being assembled.
8 pcs. 15 pcs. 23 pcs.
23 pcs.
2 pcs.
1 pc.
Leg 1
1 pc.
ASSEMBLY PROCEDURE:
1. Place the Front & Side Assembly (B) on a soft and smooth surface.
2. Assemble Bottom Frame (C) to the Front & Side Assembly by using Bolt (N) Spring
Washer (O) & Flat Washer (P) as shown in DETAIL A. Tighten with Allen Wrench (Q).
3. Assemble Legs 1 (I) to the Bottom Assembly by using Bolts (M), Spring Washers (O) , Flat
Washer (P) as shown in DETAIL B. Tighten with Allen Wrench (Q).
4. Screw Legs 2 (J) and Center Leg(K) to the Bottom Assembly (C) as shown in DETAIL C.
DETAIL A DETAIL B
(N)
(O)
(P) (Q)
DETAIL C
8 pcs.
(S)

THANK YOU FOR YOUR PURCHASE.
(S)
DETAIL E
Riverside
FURNITURE
email: [email protected]
Allegheny Entertainment
TV Console
Assembly Instructions
DETAIL D
DETAIL H
DETAIL G
DETAIL F
DETAIL I
ASSEMBLY PROCEDURE:
1. Assemble Partition 1 (D) to the Bottom assembly (C) as shown in DETAIL D.
2.
(O)
(N)
(P)
(Q)
ASSEMBLY PROCEDURE:
1. Assemble Back panel (H) to the Side Frame and Bottom assembly(C) as shown in DETAIL I.
2. Using two people, carefully place the Top Assembly (A) on to the top of the Case and Assemble by
using Bolt (N) Spring washer (O) & Flat washer (P) as shown in DETAIL J.
60-IN TV Console
#65245
Page 2 of 3