Riverside Furniture Myra 59428 User manual

#59428
Upholstered Desk Chair
Components and Hardware List
Made in Viet Nam
Page 1 of 2
Myra
Home Office
Assembly Instructions
Be sure to check all packing material
carefully for small parts, which may have
come loose inside the carton during
shipment. To prevent scratches or damage,
assemble the chair on a soft surface such as a
blanket or carpet.
TOOLS REQUIRED
(NOT PROVIDED)
STEP 2 : Press the caster (F) into the holes of the Metal Base Frame.
STEP 1 : Fit the bottom end of the pneumatic Cylinder (E) into center of the Metal Base Frame as
shown. Press down firmly on the Pneumatic Cylinder to secure.
STEP 3 : Attached the Wood Caps (D) to the Metal Base (C) by using Screws (K) and your Phillips
Screwdriver as shown.
If present, remove the
plastic cover from the top
end of the cylinder before
assembling to seat.

Made in Viet Nam
Page 2 of 2
Myra
Home Office
Assembly Instructions
STEP 4 : Attach the Seat Control (B) to the of the Chair Seat & Back (A) with
Flat Washers (I), Spring Washers (H) and Allen Head Bolts (G) as shown.
Tighten with the Allen Key (J).
STEP 5 : Fit the top of the Pneumatic Cylinder into the Seat Control. Carefully sit on the seat to
secure assembly.
Note: To prevent possible damage to some types of flooring, never roll
casters on unprotected hardwood or vinyl flooring.
The lift mechanism is in a locked position for shipping . To unlock, pull straight
out on the handle, and then the lift cylinder can be activated by lifting the handle.