Riverside Furniture Sophie 50358 User manual

Steps:
1. Place the Chair Back Assembly (A) on a soft surface such as a blanket or carpet.
2. Attach the Chair Seat (B) to the Back Assembly by using the 3-1/8" long Bolt (D) Spring
Washer (G) and Flat Washer (H) into the back corners of the Seat and 1-3/4" long Bolt
(E) Spring Washer (G) and Flat Washer (H) into the middle of the Seat, as shown . Do
not fully tighten Bolts until after next step.
Riverside
Components and Hardware List (for one chair)
FURNITURE
Made in Viet Nam
Page 1 of 2
Sophie
Dining Room
Assembly Instructions

Riverside
FURNITURE
Made in Viet Nam
Page 2 of 2
Sophie
Dining Room
Assembly Instructions
3. Attach Front Legs (C) to the Chair Seat (B) by using the 2-1/8"
long Bolts (F), Spring Washer (G) and Flat Washer (H) as
shown in Step 3.
4. Turn the Chair upright on a flat surface to level chair and
tighten all Bolts using the Allen Wrench (I).