Riverside Furniture Joelle User manual

Joelle
Queen Bed
Assembly Instructions
2 pcs.
R-A
Made in Viet Nam
email: [e-mail]
Page 1 of 4
5/0 Wood Slat
61" Long
63078 4/6-5/0 Sleigh Headboard
63079 5/0 Sleigh Footboard
63073 5/0-6/6 Sleigh Bed Rails
F-D
8 pcs. 8 pcs. 1 pc.

Page 2 of 4
email: [e-mail]
Steps:
1. Lean the back of the Headboard against the wall where the Bed will be assembled.
2. Install the All-Thread Bolts (R-B) into the Headboard and Footboard.
3. Carefully position end of one Bed Rail (R-A) onto the All-thread Bolts on the
Headboard and Footboard and connect by using the Arc Washers (R-D) and Hex
Nut (R-C). Repeat for other Bed Rail.
4. Carefully align the Footboard and Headboard to be 'square' with the Side Rails.
Using the Open Wrench (R-E) tighten all Hex Nuts attaching the Side Rails to the
Headboard and Footboard. (See Detail A).
Made in Viet Nam
Joelle
Queen Bed
Assembly Instructions
H-A
Headboard
R-A
R-A
Footboard
F-A

Page 3 of 4
email: [e-mail]
5. Attach the four Slat Support Legs (F-C) to the four Wood Slats (F-B). (See
Detail B).
6. Position and attach the Slats to the Bed Rails using the Wood Screws (F-D)
and your Phillips Screwdriver.
Made in Viet Nam
Joelle
Queen Bed
Assembly Instructions
4 pcs.
4 pcs.

email: [email protected]
Page 4 of 4
Joelle
Queen Headboard
Assembly Instructions
USE THESE HOLES FOR ATTACHING WOOD SIDE RAILS.
ALL HARDWARE IS INCLUDED WITH THE SIDE RAILS
USE THESE HOLES FOR ATTACHING A FULL SIZE (4/6)
METAL BED FRAME
CUSTOMER TO PROVIDE 5/16 X 1-1/2" LONG BOLTS, NUTS
& WASHERS TO CONNECT THE METAL BED FRAME
USE THESE HOLES FOR ATTACHING A QUEEN SIZE (5/0)
METAL BED FRAME
CUSTOMER TO PROVIDE 5/16 X 1-1/2" LONG BOLTS, NUTS
& WASHERS TO CONNECT THE METAL BED FRAME
The Headboard may be used alone
with a Queen or Full Size
Metal Bed Frame
5/0 Queen Sleigh Bed
63078 -- 4/5-5/0 Sleigh Headboard