Seconique LIGHT OAK EFFECT VENEERLISBON 2 DRAWER... User manual

LIGHT OAK EFFECT VENEER
LISBON 2 DRAWER BEDSIDE
ASSEMBLY INSTRUCTIONS
SEC/SH/01/21/EU2
Page 01
IMPORTANT
FOR DOMESTIC USE ONLY
PLEASE READ BEFORE YOU CONTINUE FURTHER
THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY
YEARS OF SERVICE IF YOU FOLLOW THE GUIDELINES FOR ITS
SAFE ASSEMBLY AND PERIODIC MAINTENANCE AND CLEANING.
ASSEMBLE ON A SOFT CLEAN SURFACE.
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED WITH
THE FITTINGS KIT.
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE
THIS PRODUCT. ITS USE WILL INVALIDATE ANY CLAIM YOU MAY
HAVE AND COULD MAKE THIS PRODUCT UNSAFE.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT RECEIVES
IT MAY BE NECESSARY TO TIGHTEN UP THE FIXINGS FROM TIME
TO TIME. THIS IS COMPLETELY NORMAL FOR ANY FLAT PACK
FURNITURE. DO NOT OVERTIGHTEN FIXING.
FOR CLEANING, YOU MAY USE A DAMP CLOTH (NOT WET) DO NOT
USE POLISH, DETERGENT OR CHEMICAL CLEANERS.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT. ALWAYS
USE A PLACE MAT UNDER HOT OR COLD ITEMS TO PREVENT
MARKING.
DO NOT
USE

PART LIST
SEC/SH/01/21/EU2
Page 02
2
3
4
5
6
Back Panel
Top Panel
Right Side Panel
Back Crossbar
Base Front Apron 1
1
1
1
1
1/1
1/1
1/1
1/1
1/1
Part Number Part Code Part Description Quantity Carton
1S100-103-033-EU1-01 Left Side Panel 11/1
7
8
9
10
11
1/1
1/1
1/1
1/1
1/1
S100-103-033-EU1-02
S100-103-033-EU1-03
S100-103-033-EU1-04
S100-103-033-EU1-05
S100-103-033-EU1-06
S100-103-033-EU1-07
S100-103-033-EU1-08
S100-103-033-EU1-09
S100-103-033-EU1-10
S100-103-033-EU1-11
Drawer Base
Drawer Front
Right Side Drawer
Left Side Drawer
Drawer Back
1
2
2
2
2
1
4
7
5
12
6
12 1/1 S100-103-033-EU1-12
Centre Shelf
2
3
2
8
10
11
9

HARDWARE LIST
(SCREWDRIVER NOT PROVIDED)
USE A FLAT HEAD SCREWDRIVER TO TIGHTEN THE CAM NUTS. A QUARTER TURN CLOCKWISE IS ALL THAT IS NEEDED.
STEP 1 - PUSH CAM BOLT INTO INSERT
STEP 2 - ALIGN THE CAM BOLT WITH THE HOLE AND PUSH TOGETHER UNTIL FLUSH. ( MAKE SURE THE ARROW OF
THE CAM LOCK IS POINTING TOWARD ON THE EDGE OF THE PANEL.)
STEP 3 - THE HEAD OF THE BOLT GOES INTO THE WIDE MOUTH OF THE CAM LOCK. YOU THEN TURN THE LOCK SO
THE NARROW PART CLOSES OVER THE BOLT.
Page 03
A
B
C
D
E
F
G
H
I
DOWEL 6 X 30MM 16 PCS
DRAWER RUNNER A - L/R 4 PCS
BOLT M7 X 60MM
2 PCS
SCREW M4 X 38MM 8 PCS
CAM BOLT + CAM NUT 8 SETS
BOLT M6 X 50MM
HANDLE
2 PCS
2 PCS
SCREW M3.5 X 16MM 16 PCS
TACK 24 PCS
J
K
L
M
N
O
P
DRAWER RUNNER B - L/R
SCREW M3.5 X 12MM
ANTI - TIP STRAP
HANDLE SCREW 19MM
SCREW M4 X 16MM
PLASTIC FOOT
ALLEN KEY
4 PCS
2 PCS
2 PCS
20 PCS
4 PCS
4 PCS
1 PC
SEC/SH/01/21/EU2

STEP 1
PARTS REQUIRED
1 - LEFT SIDE PANEL x1
HARDWARE REQUIRED
A04
H04
PARTS REQUIRED
2 - BASE FRONT APRON x1
HARDWARE REQUIRED
A
H04
STEP 2
08
Page 04
FIRST HOLE
FRONT
TOP SECOND HOLE
BACK
LAST SECOND HOLE
A
5
H
A
I
L
5 - RIGHT SIDE PANEL x1
I04
L16
TOOLS REQUIRED
6
H
3 - BACK CROSSBAR x1
4 - CENTRE SHELF x1
SEC/SH/01/21/EU2
6 - TOP PANEL x1
A
A
4
A
1
TOOLS REQUIRED
2
3

STEP 3
PARTS REQUIRED
1 - LEFT SIDE PANEL x1
HARDWARE REQUIRED
B02
C02
PARTS REQUIRED
6 - TOP PANEL x1
STEP 4
Page 05
1
5
C
B
SEC/SH/01/21/EU2
2 - BASE FRONT APRON x1
3 - BACK CROSSBAR x1
4 - CENTRE SHELF x1
TOOLS REQUIRED
TOOLS REQUIRED
H
4
5 - RIGHT SIDE PANEL x1
2
3
6

STEP 5
PARTS REQUIRED
7 - BACK PANEL x1
HARDWARE REQUIRED
E16
L04
PARTS REQUIRED
HARDWARE REQUIRED
D
M04
STEP 6
04
Page 06
SEC/SH/01/21/EU2
L
E
TOOLS REQUIRED
D
M
TOOLS REQUIRED
7

STEP 7
PARTS REQUIRED
8 - DRAWER BACK x2
HARDWARE REQUIRED
A04
F08
PARTS REQUIRED
11 - DRAWER FRONT x2
HARDWARE REQUIRED
G
H04
STEP 8
02
Page 07
SEC/SH/01/21/EU2
9 - LEFT SIDE DRAWER x2
10 - RIGHT SIDE DRAWER x2
TOOLS REQUIRED
F
A
X2
K04
TOOLS REQUIRED
11
H
X2
G
X2
K
H
11
X2
8
9
10
11

STEP 9
PARTS REQUIRED
12 - DRAWER BASE x2
HARDWARE REQUIRED
D12
E08
PARTS REQUIRED
STEP 10
Page 08
SEC/SH/01/21/EU2
J04
TOOLS REQUIRED
X2
E
X2
J
D
12

P
02
Wall fixings are not supplied with this product as different wall
materials require different types of fixing devices.Please make
sure you use fixings suitable for the walls in your home.
WARNING
Serious or fatal injuries can occur from furniture tipping
over. To prevent the furniture from tipping over we
recommend that it is permanently fixed to the wall.
STEP 11
PART REQUIRED
HARDWARE REQUIRED
O
02
TOOLS REQUIRED
Page 09
SEC/SH/01/21/EU2
O
P
TOP
WALL
TOP
TOP
WALL
O