Riverside Furniture Castlewood 33591 User manual

#33591
Server
Riverside
Components and Hardware List
email: [email protected]
FURNITURE
Made in Viet Nam
Page 1 of 2
Upper Leg
A
Step 1: Place the Server Top upside down. Attach the four Upper Legs (C) into the corners of the Server
Top.
Step 2: Carefully position the Shelf (B) onto the bottom of the Upper Legs, aligning the holes in the Legs
and Shelf.
Step 3: Attach the Shelf to the Legs by screwing the bolt in the top of the Lower Leg (D) into the bottom of
each Leg. Hand Tighten snug.
Step 4. Install the Leveler (E) into the bottom end of the Center Support Leg, if not pre-installed. Attach
the Support Leg to the bottom of the Server Shelf as shown.
Step 5: Carefully set the assembled Server upright.
4 pcs.
B C
EF
Server Top Shelf
1 pc. 1 pc. D
Lower Leg
4 pcs.
Center
Support Leg Leveler
Step 1
Step 4
A
B
C
E
F
Step 5
Step 2 & 3
G
Tipping Restraint Hardware Kit (G)
(Inside White Plastic Bag)
Anti-tipping
restraint
Castlewood
Dining Room
Assembly Instructions