Roberts R982 User manual

ROBERTS
Sound for Generations
4'&
FM STEREO/AM
PLL DIGITAL
PERSONAL RADIO
Operating Instructions
R982 Instruction Book.pm6 24/10/99, 14:121

123
4
6
5
7
8
9
10
11
12
13
14
Controls
1
R982 Instruction Book.pm6 24/10/99, 14:132

If you need any further advice, please call our Technical Helpline on
0181 758 0338 (Mon-Fri)
1. Volume control.
2. Lock switch.
3. Power button.
4. Liquid crystal display.
5. Tuning indicator.
6. Memory/Alarm set button.
7. Select button.
8. Tuning up/Memory select/Time adjust button.
9. Tuningdown/Memoryselect/Timeadjustbutton.
10. Waveband selector/Time button.
11. Mono/Timer set button.
12. Earphone socket
13. Loudspeaker On/Off switch
14. Battery compartment
Controls cont.
2
R982 Instruction Book.pm6 24/10/99, 14:133

ab c def
g
h
i
j
kl
Display
3
R982 Instruction Book.pm6 24/10/99, 14:134

If you need any further advice, please call our Technical Helpline on
0181 758 0338 (Mon-Fri)
a. Waveband select/PM indicator.
b. Timer indicator.
c. FM stereo indicator.
d. Lock indicator.
e. Low battery indicator.
f. Alarm indicator.
g. Memory delete indicator.
h. Auto preset indicator.
i. Memory set indicator.
j. Select cursor.
k. Memory preset indicators.
l. Time/Frequency digits.
Display cont.
4
R982 Instruction Book.pm6 24/10/99, 14:135

Batteries
Openthebatterycover(14)locatedontherearoftheR982bysliding
it in the direction shown by the arrow. Insert two LR03 (AAA) size
batteries into the compartment. Ensure that batteries are inserted in
accordancewiththediagramsshowninsidethebatterycompartment.
Note: Batteries should be replaced when the low battery indicator
(e) ) appears in the display.
DuringbatteryreplacementensurethatthePowerisswitchedoffand
the Lock switch (2) is in the left hand (lock) position. This will prevent
lossoftimeandmemorypresetsduringbatteryreplacement.Battery
replacement should be completed within three minutes to prevent
loss of time and stations stored in memory presets.
If the radio is not to be used for long periods set the Lock switch (2)
to the left hand (lock) position, this will reduce power drain on
batteries during storage.
5
R982 Instruction Book.pm6 24/10/99, 14:136

If you need any further advice, please call our Technical Helpline on
0181 758 0338 (Mon-Fri) 6
R982 Instruction Book.pm6 24/10/99, 14:137

Lock Switch
The lock switch (2) is used to prevent unintentional operation of the
radio.
To prevent accidental operation of the controls when the radio is
packed in a suitcase or travel bag. Set the lock switch (2) to the left
hand (lock) position the indicator (d) will appear in the display.
The Power and all other buttons will be disabled
To release the Lock switch move the Lock switch to the right hand
(unlock) position, the indicator (d) will be removed from the
display.
7
R982 Instruction Book.pm6 24/10/99, 14:138

If you need any further advice, please call our Technical Helpline on
0181 758 0338 (Mon-Fri) 8
R982 Instruction Book.pm6 24/10/99, 14:139

Setting the time
When the batteries are installed for the first time the LCD (4) time
digits will flash indicating that the time needs to be set.
Note:Thetimeisdisplayedin12hr.formatwithAMandPMindicators.
Ensurethatthepoweristurnedoffandthelockswitch(2)issettothe
right hand (unlock) position.
Pressandholddownthetimebutton(10)untilthehoursdigitflashes
in the display, release the time button.
Whilst the hours digit is flashing set the required hour using the time
adjust buttons (8&9).
Press and release the time button (10) the minutes digits will flash in
the display.
Whilst the minutes digits are flashing in the display set the required
number of minutes using the time adjust buttons (8&9).
Press and release the time button (10) to finalise time.
Note: Setting the hour must commence within the five seconds
during which the hours digit is flashing in the display. If the setting of
the hour does not commence within five seconds the display will
revert to showing normal time.
9
R982 Instruction Book.pm6 24/10/99, 14:1310