Rockhood TouchWin TH465-M User manual

TH series Touch Screen
User’s manual
Rockhood Automation Co.,Ltd

Preface
Thank you for buying TH series touch screen made by Rockhood Automation Co., Ltd, this
manual should be read and understood before doing relative operation.
Purpose
This manual will guide readers in the correct operating and maintaining TH series touch
screen. Also, this manual refers to the application situations, operations, transportation,
storage, set up, installation, maintaining and so on.
This manual mainly contains three parts: hardware, software, application.
¾Hardware Part: contain the characteristics, specifications, dimensions, installations and
communication connecting of TH series.
¾Software Part: introduce how to use the edit software.
¾Application Part: illustrate the examples, make users to know TH better.
下面的内容只针对 TP 系列产品。
Please read this manual very carefully before operation and please do the correct operations
while paying close attention to all the safty points.The following contents only used for TP
series touch screen.
Personnel
This manual is fit for following personnel:
¾End Users
¾Engineers
¾Technicians
Please read the safety notes carefully before using the products.
Contact us
If you have any questions, please contact us use the following methods:
Email: [e-mail]
Tel: [phone] 0086-13661780977
Fax: [phone]
Address: 4th Floor, Building 7, Original Industrial Park, No.100 Dicui Road,
Wuxi, Jiangsu province, China

Safety caution
Please read the manual carefully before using. Make sure your operation is correct and safety. The
following contents are only aimed at TH series products.
Please keep the manual properly, put in the location easy to get and read, hand the manual to the
end users.
NOTICE
zPlease do not bundle power line with communication cable or let them too close,
keep at least 10cm.
zPlease do not install module or change the wire. Otherwise it may cause
malfunction, error action, damage or fire.
zPlease shut off the power when there is abnormal smell or voice in TH products.
(The short sound made by buzzer after power on is normal)
zDo not strike the touch panel with a hard or sharp object, or press on the touch
panel with too much force or with pen, screw, since it may damage the touch panel
and cause damage.
zPlease tighten the screws when install the products to prevent from falling off.
zPlease transport, store, set up, install and maintain the products correctly, otherwise
the touch panel may be damaged.
DANGERS
zConfirm the rated voltage of TH and connect correct before power on.
zPlease do not touch the terminals after power on to avoid electric shock.
zPlease do not open the cover board.
zPlease cut off all the power when installing or disassembling the products, or it
may cause error action and malfunction.
zPlease use TH touch screen in suitable environment conditions according to
instructions, otherwise it may cause accident.
zPlease do not use the products where there is high frequency radiate, high magnetic
field or other interferences.

Catalog
Preface ..............................................................................................................................................3
Safety caution....................................................................................................................................4
1. Summarize ................................................................................................................................6
1.1 Performance characteristics ..........................................................................................6
1.2 Work flow............................................................................................................................7
2. General specification.....................................................................................................................8
2.1 TH465-M ............................................................................................................................9
2.2 TH765-M ..........................................................................................................................10
2.3 TH865-M ..........................................................................................................................11
2.4 THA61-M..........................................................................................................................12
3. Hardware.....................................................................................................................................13
3.1 Hardware structure............................................................................................................13
3.2 Dimension .........................................................................................................................14
3.3 Installation and using environment ...................................................................................16
4. Interface and switch ......................................................................................................................1
4.1 Introduction.........................................................................................................................1
4.2 DIP switch...........................................................................................................................1
4.3 COM1 port ..........................................................................................................................1
4.4 COM2 port ..........................................................................................................................4
4.5 USB-A port .........................................................................................................................5
4.6 USB-B port .........................................................................................................................6
5. TouchWin software .......................................................................................................................8
5.1 Preparation ..........................................................................................................................8
5.2 The construction of Touchwin.............................................................................................9
5.2.1 Screen.......................................................................................................................9
7. Application..................................................................................................................................10
7.1 Adjust the touch area.........................................................................................................10
7.2 Photo application...............................................................................................................11
7.3 Debug and download ........................................................................................................15
7.4 Data duplication ................................................................................................................16
8. TH series touch screen interior objects .......................................................................................17

1. Summarize
Rockhood new touch screen TH series are based on RT/TP series products. It not only has the
language, characters editing, data display, monitor and alarm functions but also has 65536 true
color LCD which can bring you brand-new vision enjoyment. It has the advantage of large
capability for data duplication and friendly user interface. It provides perfect humanized solution
for industrial system, make it easy to control the system.
The function compare between TP and TH:
Function compare
Series Colors Font
setting
3D
picture
library
Adjust
the touch
area
Animation Password
Two ports
USB data USB data
communication download duplication
indenpendently
√〇〇√√√〇〇
256
RT/TP
65536 √√√√√√√√
TH
1.1 Performance characteristics
Display
zVarious models: product size from 4.7’’ to 10.4’’.
zRich colors: 65536 TFT true color, support BMP, JPG format, display more lively.
zAdjust function for touch screen.
zSupport multinational language: simple/traditional Chinese, English, Japanese, Korean.
Define the font as you like, support underline, italic, bold, shadow and other art words.
zLarge picture library, with preloading mode, no delay for screen motion.
Control
zSwitch control, dynamic monitor and display data, bar map, real time trend map, time trend
map, XY trend map, discrete/continue column map, real time alarm, history alarm record…
zUser-defined data collection and saving function
zSet user’s authority, 9 levels password protection
zSimulate online/offline, upload/download data, configuration function
zUSB port inside, connect flash disk to realize data duplication function, speed 480Mbps
zSpecial USB-B port for data download, make the data transfer faster
zUser-defined animation track design

Communication
zTwo ports communication independently, can connect two different devices at the same time
zDrive the panel printer directly, economical and flexible
zSupport free format communication, user edits the driver program
1.2 Work flow
The work flow of using TH:
Install edit software TouchWin
Edit your project
Connect PC and TH, power on
Do simulate offline Do simulate online
Simulate the TH
action in the
software.
Connect the PC with
TH, simulate the action
in your PC
Download project in TH
Connect TH with other devices
Realize communication and data transmission
NOTICE
Please use TouchWin V2.C and later version to edit your TH project.

2. General specification
This chapter will introduce the specification of TH series touch screen.
TH series touch screen contains TH465-M, TH765-M, TH856-M and THA61-M.
Series Types
TH TH465-M TH765-M TH865-M THA61-M

2.1 TH465-M
Item TH465-M
DC20-DC28VInput voltage
Consumption current 130mA
Less than 10msMomentary power off
allowance
Withstand voltage AC1000V-10mA 1 minute ( signal and time )
Electrical
DC500V- about 10MΩ( signal and time )Insulated impedance
COM1 Support RS-232/RS-485
COM2 Support RS-232/RS422/RS485
USB1 USB-A ( accord with USB2.0 )
USB2 USB-A ( accord with USB2.0 )
Interface
USB3 USB-B ( accord with USB2.0 )
0－50℃Operation temperature
-20-60℃Reserve temperature
20-85% ( no condensation )Environment
temperature
Withstand oscillation 10-25Hz ( X, Y, Z each direction 30 minutes 2G )
Anti-jamming Voltage noise: 1000Vp-p, pulse 1us, 1 minute
Surrounding air No corrosive gas
Environment
Protection construction IP65
Type 65536 true colors
Screen size 4.3 inch
More than 50000 hours, 24 hours running when surrounding
temperature is 25 ℃
Use life
Resolution 480*272
Contrast Non-adjustable
Character Chinese, English, Korean, Japanese…
Character size Any size and font
Screen
specification
4-wire resistance modeTouch panel
Memory Screen 8MB
Cooling method Natural air cooling
Exterior dimension 150.0*100.0*41.0mm
Construction 144.0*94.0mmMounting dimension

2.2 TH765-M
TH765-M
Item
DC20-DC28VInput voltage
Consumption current 250mA
Less than 10msMomentary power off
allowance
Withstand voltage AC1000V-10mA 1 minute ( signal and time )
Electrical
DC500V- about 10MΩ( signal and time )Insulated impedance
COM1 Support RS-232/RS-485
COM2 Support RS-232/RS422/RS485
USB1 USB-A ( accord with USB2.0 )
USB2 USB-A ( accord with USB2.0 )
Interface
USB3 USB-B ( accord with USB2.0 )
0－50℃Operation temperature
-20-60℃Reserve temperature
20-85% ( no condensation )Environment
temperature
Withstand oscillation 10-25Hz ( X, Y, Z each direction 30 minutes 2G )
Anti-jamming Voltage noise: 1000Vp-p, pulse 1us, 1 minute
Surrounding air No corrosive gas
Environment
Protection construction IP65
Type 65536 true colors
Screen size 7 inch
More than 50000 hours, 24 hours running when surrounding
temperature is 25 ℃
Use life
Resolution 800*448
Contrast Non-adjustable
Character Chinese, English, Korean, Japanese…
Character size Any size and font
Screen
specification
4-wire resistance modeTouch panel
Memory Screen 64MB
Cooling method Natural air cooling
Exterior dimension 205.0*151.5*48.9mm
Construction 192.0*138.5mmMounting dimension

2.3 TH865-M
TH865-M
Item
DC20-DC28VInput voltage
Consumption current 260mA
Less than 10msMomentary power off
allowance
Withstand voltage AC1000V-10mA 1 minute ( signal and time )
Electrical
DC500V- about 10MΩ( signal and time )Insulated impedance
COM1 Support RS-232/RS-485
COM2 Support RS-232/RS422/RS485
USB1 USB-A ( accord with USB2.0 )
USB2 USB-A ( accord with USB2.0 )
Interface
USB3 USB-B ( accord with USB2.0 )
0－50℃Operation temperature
-20-60℃Reserve temperature
20-85% ( no condensation )Environment
temperature
Withstand oscillation 10-25Hz ( X, Y, Z each direction 30 minutes 2G )
Anti-jamming Voltage noise: 1000Vp-p, pulse 1us, 1 minute
Surrounding air No corrosive gas
Environment
Protection construction IP65
Type 65536 true colors
Screen size 8 inch
More than 50000 hours, 24 hours running when surrounding
temperature is 25 ℃
Use life
Resolution 800*600
Contrast Non-adjustable
Character Chinese, English, Korean, Japanese…
Character size Any size and font
Screen
specification
4-wire resistance modeTouch panel
Memory Screen 64MB
Cooling method Natural air cooling
Exterior dimension 224.4*170.8*45.5mm
Construction 211.4*157.8mmMounting dimension

2.4 THA61-M
THA61-M
Item
DC20-DC28VInput voltage
Consumption current 630mA
Less than 10msMomentary power off
allowance
Withstand voltage AC1000V-10mA 1 minute ( signal and time )
Electrical
DC500V- about 10MΩ( signal and time )Insulated impedance
COM1 Support RS-232/RS-485
COM2 Support RS-232/RS422/RS485
USB1 USB-A ( accord with USB2.0 )
USB2 USB-A ( accord with USB2.0 )
Interface
USB3 USB-B ( accord with USB2.0 )
0－50℃Operation temperature
-20-60℃Reserve temperature
20-85% ( no condensation )Environment
temperature
Withstand oscillation 10-25Hz ( X, Y, Z each direction 30 minutes 2G )
Anti-jamming Voltage noise: 1000Vp-p, pulse 1us, 1 minute
Surrounding air No corrosive gas
Environment
Protection construction IP65
Type 65536 true colors
Screen size 10.4 inch
More than 50000 hours, 24 hours running when surrounding
temperature is 25 ℃
Use life
Resolution 640*480
Contrast Non-adjustable
Character Chinese, English, Korean, Japanese…
Character size Any size and font
Screen
specification
4-wire resistance modeTouch panel
Memory Screen 64MB
Cooling method Natural air cooling
Exterior dimension 311.0*234.0*48.0mm
Construction 302.0*225.0mmMounting dimension

3. Hardware
3.1 Hardware structure
The hardware structure of TH series touch screen includes front and back side. Take TH465-M as
an example to explain the structure.
USB-A port
Touch area
Power LED
USB-A port
Label
USB-B port
Power Plug COM1 port COM2 port DIP switch

3.2 Dimension
r dimension:150.0mm×100.0mm×41.0mm, mounting dimension:
144.0mm×94.0mm.
) TH765-M exterior dimension:205.0mm×151.5mm×48.9mm, mounting dimension:
192.0mm×138.5mm.
(1) TH465-M exterio
(2
144.0
94.0
24V 0V F G
1234
92.0
142.0
41.0 150.0
100.0
COM1 COM2
138.5
192.0
48.9
12.0
136.5
190.0
1234
24V 0V FG
1234
COM1 COM2
205.0
151.5

(3) TH865-M exterior dimension: 224.4mm×170.8mm×45.5mm, mounting dimension:
211.4mm×157.8mm.
(4) THA61-M exterior dimension: 311.0mm×234.0mm×48.0mm, mounting dimension:
02.0mm×225.0mm.
3
211.4
157.8
1234
1234
Download PLC
24V 0V FG
224.4
170.8
38.0
45.5
155.8
209.4
302.0
225.0
+24V 0V FG
311.0
234.0
48.0
223.0
43.1 300.0
1234
+24V 0V FG
COM1 COM2

3.3 Installation and using environment
(1) Install requirements:
TH has four ferric mounting racks when out of factory, there are two square holes on the up, down
side of TH, use mounting rack to fix the TH with control cabinet.
In order to avoid TH temperature too high after long time working, please keep 10cm space on the
up/down and 5cm on the left/right side of the TH when installing.
(2) Install steps
rectangle mounting hole in the
Install panel Fixed bracket
Step1 Refer to the dimension in the former chapter to open a
control cabinet
Step2 Add airproof circles in the airproof slot when installing
Step3 Insert the bottom of TH into the mounting hole of control cabinet
Step4 Insert the install rack into the fix hole of TH then tighten the screw
Step5 Connect TH and PLC with communication cable
NOTICE
The communication cable can be offered by the supplier or made by user according to the
connection map, input +24V DC power to start working
(3) Environment
TH series touch screen indoor.
, steam, dust, fast vary temperature, high humidity ( it may cause moisture inside
TH).
Please use
Do not use TH in below environment:
Inflammable gas

(4) Power supply requirements:
TH series touch screen use DC +24V power supply only. The permitted voltage range is 20V~28V.
Besi
elec
C +24V output of PLC to drive the TH, make sure the PLC has enough current
the back cover by yourself.
Please do not analyze or change TH by yourself
Please cut off all the power supply while observing the TH.
Please do not touch terminals after power on, otherwise it may cause electric shock.
Do not hot plug the cable or pull the cable when communicating, it may destroy the cable.
Please periodic check installation and screws to avoid falling off.
h area, in order to keep touch sensitivity.
Please use clean cloths with little detergent or alcohol to clean the screen.
d out acid, alkali is recommended.
Keep the thrill or strong corrosive gas
Never use spray detergent.
he screen too hard while wiping.
The connection is as below:
+24V 0 V
+DC-
des, if connect high voltage or AC power supply with TH, the TH may be damaged and cause
tric shock to human body.
NOTE: if use the D
to drive the TH.
(5) Maintenance and cleaning
zPlease do not open
z
z
z
z
z
zPlease use TH series touch screen in the certain conditions according to instructions.
zKeep the cleanness of touc
z
zNeutral etergent, with
TH away from
z
z
zAvoid damage to the screen, please do not touch t
Caution
Maintenance
Clean
Caution

Disposal
Caution
zPlease dispose the TH as industry waste.

4. Interface and switch
4.1 Introduction
TH series touch screen has 1 group of DIP switch and 5 communication ports.
1 2 34
5
6
1:DIPswitch 4:USB-Aport1
2:COM1port 5:USB-Aport2
3:COM2port 6:USB-Bport3
4.2 DIP switch
TH has one group of DIP switch at the back side, they can set the function of COM1 port.
Switch Switch1 Switch2 Switch3 Switch4 Function
ON OFF OFF OFF Undefined
OFF ON OFF OFF Forced download mode of COM1
OFF OFF ON OFF Adjust mode of touch area
State
OFF OFF OFF ON Interior check mode ( not recommend to use)
4.3 COM1 port
TH series touch screen COM1 port has these functions:
¾Communication function: connect with PLC, printer, frequency inverter, used as communication port.
¾Download function: connect with PC, used to download data and screens.

COM1 port pins definition Pin Name Meaning
12345
6789
1 NC Unused terminal
2 RXD RS232 receive
3 TXD RS232 send
4 A RS485 + signal
5 GND Signal ground
6 NC Unused terminal
7 B RS485 – signal
8 NC Unused terminal
9 NC Unused terminal
zDownload function
The following terms should be met when using download function:
(1) Turn on switch 2 in DIPswitch group to make the COM1 in download mode.
(2) Please use the cable provided by Rockhood company
Step:
Make sure your PC has serial port or USB port ( use USB converter tool), connect it with COM1, then click
in the software to download data. The pins definition is shown as below:
PCserialport THCOM1port
PC
Rockhood download cable
TH
(1) Turn on switch2 when TH power supply is cut off
(2) Power on TH, connect TH with PC via Rockhood download cable to download
project
(3) After the download process is over, cut off the power of TH, then turn off the
switch2
(4) Power on the TH again, the project will run normally