Rockpals LDG-HERO-H4 User manual

USER MANUAL
Portable Cordless Power Cleaner
LDG-HERO-H4
Thank you for choosing ROCKPALS pressure washer.
Please Read Before Returning This Product for Any Reason.
If you have a question or experience a problem with your ROCKPALS purchase,please contact us directly through the
free call: (US)(877)-756-8666(service time:Mon.-Fri.: 9:00-17:00 PST)
to speak with our customer service team or send email to [email protected],we will reply you within 24 hours.
SAVE THIS MANUAL FOR FURTURE REFEREN

0
Product Brief Introduction
The way to open the packing
Open the package, take all accessories, documents and the cleaner out of the box. Please keep
the outer packing for future transportation of maintenance.
Name of all parts
All accessories are subject to the real objects. The following pictures and text are only used
for installation instructions.
1
2
3
4
5
6
8
7
9
10
11
12
13
14
15
16
17
1. Gun bar connection button
2. Multi-water gun
3. Multi-function jet pipe
4. Soap lye pot
5. Inlet pipe
6. Pipe connector
7. Foam high-pressure
two-in-one jet pipe
8. Extension pipe
9. Rotatable jet pipe
10. Water pipe filter
11. Battery charge
12. Lithium battery pack
13. Battery lock
14. Water inlet
15. Trigger lock
16. trigger
17. High/low pressure
button

1
Use scenarios
The lithium battery high pressure cleaner is suitable for multi-scene and multi-object
cleaning,such as car ,bicycle ,road,glass,barbecue oven,flowers watering etc.
Installation and use
1. Installation of the lithium battery pack and host
1) Follow the arrow direction shown and aim the guide rail of the lithium battery pack at the
under the handle of the host until the battery is locked.
2) Please press the buttons on both sides of the lithium battery pack and pull it out backward
at the same time when the pack is removed.
Note: Avoid battery getting any water during installation.
2. Installation and use of the extension pipe,jet pipe and soap lye pot
Note:This cleaning machine can be equipped with extension pipe and a variety of jet
pipes,such as multi-function ,rotatable and foam high-pressure tow-in -one types.
Users can choose the appropriate accessories according to the washing object.Do not point the
jet pipe towards other people or yourself during your using.
2-1. Installation of extension pipe
1) Insert the extension pipe button upward into the host interface.When you hear the click
sound,this installation is finished successfully.
2) Press the button on the host then the extension pipe will be unplugged.

2
2-2. Installation and use of the foam high-pressure jet pipe
1) Aim the two-in -one soap lye pot at the installation position on the jet pipe then insert and
rotate to lock.
2) Put the soap lye pot under the extension pipe and then insert the foam high-pressure
two-in-one jet pipe into the joint of the pipe.When you hear the click sound,this installation is
finished successfully.
3) Rotate according to the picture to choose jetting high-pressure water or foam.
4) Press the button on the extension pipe then the jet pipe will be unplugged.
2-3. Installation and use of the rotatable jet pipe
1) Insert the rotatable jet pipe into the joint of the extension pipe.When you hear the click
sound,this installation is finished successfully.
2) Rotate according to the picture then the direction of outlet water can be adjusted.
3) Press the button on the extension pipe then the jet pipe will be unplugged.
2-4. Installation and use of the multi-function jet pipe
1) Aim the two -in -one soap lye pot at the installation position on the jet pipe then insert and
rotate to lock.
2) Put the soap lye pot under the extension pipe then insert the multi-function jet pipe into the
joint of the extension pipe.When you hear the click sound,this installation is finished
successfully.

3
3) Mode selection of water jetting
There are six effects of water jetting which are 0°, 20°, 20°slant direction,40°, foam
jetting,and shower mode or 0° heavy flow.Please choose the appropriate water jetting mode
according to the washing conditon.Multi-function jet pipe of the flower jetting is for irrigation
etc use.Rotate the outer ring of the jet pipe to select the intended water jetting pattern.
0°
20°
20° slant direction
40°
Foam jetting
Slower mode
0°
4) Press the button on the extension pipe then the jet pipe will be unplugged.
3. Installation and use of the water inlet pipe
1) Hold the pipe connector as shown in the picture and insert it into the water inlet of
the high pressure cleaner host.When you hear the click sound,this installation is
finished successfully.
2) Hold the connector and pull it down to remove the water inlet pipe.

4
The charging of lithium battery pack
Before use,press the indicating button of battery on the lithium battery pack to check
the battery power state.
When the battery indicator is not all lighted which indicates the low power,please use
the charger coming with the high pressure cleaner to charge first.
1. As shown in the picture below,please point the charging plug of the charger at the
charging interface of the lithium battery pack to start charging.
Note: Please observe the lithium battery power indicator to confirm the charging state.
Indicator state
State description
Flickering
Be charging
Full light on
Charging completed
No indicator light on
Charging fault
Battery indicator
Indicating button
of battery
Charging interface
2. After charging completed,unplug the charger.Unplug the lithium battery pack.
Note
1As the lithium battery pack attached with the cleaner is not fully charged,it is
recommended to use after full charge.
2Please keep the charging process carried out in a ventilated and dry environment.The
complete charging process takes about 1 to 5 hours,which depends on the charger
configuration.
3During use ,when the machine automatically switches from high to low pressure mode
which indicated that the battery power is insufficient,please timely charge.
4When the power is too low,the machine will automatically start the power -off protection
to protect the battery.Please timely charge.

5
The selection of working mode
There are Auto (automatic) and Eco (economical) mode which can be switched by pressing
the mode button.
1. To get fast water jetting, it is suggested to choose the Auto mode when the high pressure
cleaner starts. The working mode can be switched after the normal water jetting.
2. To get fast water jetting,there is no need to connect the jet pipe first.Press and hold the
trigger until the cleaner jets water normally and then connect the jet pipe to work correctly.
Clean and Maintenance
Tip: Please remove the battery from the cleaner machine before cleaning.
1. Water inlet filter: Clean the filter regularly to prevent blocking of the water inlet which
will result no or decreasing of water jetting.
Clean method: Remove the filter and clean it as shown in the picture below.
filter
2. Water pipe filter: Clean the filter regularly to prevent blocking of the water pipe inlet
which will result in the water inleting not smoothly.
Clean method: Unscrew the outer cover of the water pipe filter and draw out the filter for
cleaning.
water tube filter

6
Method of storage and preservation
Please unplug the battery,remove the jet pipe , extension pipe and inlet pipe after your
use,then drain the remaining water inside the cleaner machine and inlet pipe,and then store it.
Note:
1Lithium battery pack should be stored in a dry place separately. Do not put the pack in a
car or any other high temperature environment for a long time.
2Please keep the cleaner machine in a safe and dry place to avoid children’s touch.
Safety Caution
Do not put the higher pressure cleaner near any fire source or any other high temperature
places.
Do not expose lithium battery pack in heat or fire source and avoid storage in the direct
sunlight environment.
Do not make the lithium battery pack subjected to mechanical impact.
Do not make lithium battery pack short-circuit. Don’t place the pack in boxes or drawers at
will to avoid short-circuiting each other or being short-circuited by other metal objects.
Do not disassemble and open the lithium battery pack.
Please keep away from children.
Do not charge the lithium battery for a long time.
It is recommended to charge the lithium battery pack every three months when it is not in use
for a long time.
After long-term storage,it is recommended to conduct several times of charging and
discharging cycles for the lithium battery pack to get the best working performance.
Please check whether the charger is in good condition before charging.
Be sure to use the original charger of the lithium battery pack. Do not use the charger and
lithium battery pack which are not machine specific.
Improper use of high pressure jet pipe can be dangerous. Do not point the jet pipe directly at
people, animals, charged devices or the cleaner itself.

7
Do not shoot water at the equipment containing electrical components.
Do not let children or people with mental or behavioral disabilities use this product.
Please discontinue use when the product accidentally falls to the ground,showing visible
damage or failure.
The performance of lithium battery pack is the best under normal temperature (20℃±5℃).
Please use dry cloth to wipe products for cleaning, Do not use water, gasoline,alcohol and
other chemical solvents.
Please clean the water inlet filter and water pipe filter regularly.
Waste batteries should be classified for recycling and do not thrown into dustbins at will.
Do not use the supplied charger on any other device.
Do not charge at high temperature.
Charge only indoors and prevent getting wet in the rain.
If the power cord is damaged, it must be replaced by the manufacturer, its maintenance
department or similar professionals to avoid danger.
This product shall operate by connecting water through the inlet pipe. Do not make it operate
long time without water connection.
Troubleshooting
Please check the following points before you contact the maintenance department.
Description
Possible Cause
Solution Suggestion
Lithium battery power indicator
flickering
Low battery
Battery Charging
No power on after machine on
Low battery
Battery Charging
Stop working unexpectedly
High temperature ,automatic
protection
Turn on after the heat
temperature drops
Battery can’t be charged
The battery and charger are not
connected in place
Reinsert the battery into the
charger to make sure the
connection is in place
The charger is not connected to
the power supply
Check whether the power
supply is energized normally to
make sure the charger is
connected correctly (whether

8
the charger indicator is on)
Low water flow
Blocking of the filter
Clean the filter and water inlet
filter
Water inlet pipe is folded
Unfold or replace the water pipe
Impurities in water
Change it into clean water
Blocking of the jet pipe
Clean the jet pipe
No water suction
Wrong connection of the water
pipe connector and water inlet
Connect the inlet pipe connector
to the machine water inlet in
place
The water pipe filter is not fully
inserted into the water
Insert the water pipe filter fully
into the water
The water inlet seal ring is off
or damaged
Install or replace the seal ring
Long waiting time for water
coming out
The cleaner is on Eco mode
Switch to Auto mode
Low water flow
Refer to the solution of low
water flow
Leakage of water outlet
Jet pipe or extension pipe is not
installed in place
Install the jet pipe with
extension pipe or the cleaner
host in place
Note: If there is other trouble,special tools should be used meanwhile the maintenance must
be implemented by professional specialists from the manufacturer, its maintenance or similar
departments to avoid danger.
Product specification
Technical data
Product model
LDG-HERO-H4
Charger Voltage/Frequency
110~240V 50/60Hz
Charging Current
500~1000mA
Charging Time
3~5 hours
Rated Voltage
40V Max
Rated Pressure
Auto Mode
3.5 MPa (507.5Psi)
Eco Mode
2.2 MPa (319Psi)
Max Pressure
6.0 MPa (870Psi)
Rated Flow
Auto Mode
150 L/h (0.66GPM)
Eco Mode
120 L/h (0.53GPM)
Max Flow
200 L/h (0.88GPM)
Maximum Water Inlet Pressure
0.7 MPa (101.5Psi)
Height of Water Suction
Max 1.2 Meter