Rockville Rv265bt User manual

OWNER’S MANUAL

OFF-ROAD/MARINE BLUETOOTH SPEAKER SYSTEM

RV265BT

Thank you for purchasing this Rockville RV265BT O-Road / Marine Bluetooth Speaker System. We have spared no expense in manufacturing this unit to meet

the highest quality standards. With proper care and installation this unit will provide you with the highest levels of sound quality. We hope that this unit will bring

you years of performance and reliability.

This RV265BT features Rockville’s exclusive HEX Base Cone technology and Flex Motion surround. HEX Base Cone technology provides extreme musical bass

response by structurally engineering the cone surfaxce to interact in-sync with the sound vibrations. The Flex Motion surround in combination with a linear pro-

gressive CONEX spider provides a sti, durable suspension that allows for perfect voice coil alignment and maximum excursion during music playback. These

high tech speakers are powered by an built-in stereo amplier.

Please read this installation guide carefully for proper use of your RV265BT O-Road / Marine Bluetooth Speaker System. Should you need technical assistance

during or after your installation please call our technical help line at 1-646-758-0144, Monday through Friday, 9am to 5pm EST.

• The RV265BT can be powered by your vehicle’s cigarette

lighter port or it can be wired directly to the ignition using

the included cigarette lighter power connector. The RED

wire goes to the RED ( + ) wire of the ignition harness. The

BLACK wire willl serve as a ground connection. It should be

connected to the vehicle chassis. When connecting the ground

wire make sure that there is no paint or other insulator blocking

the ground connection.

• To mount the RV265BT to your vehicle use the heavy

duty mounting straps (A) included in the accessories package.

Please ensure that the straps are pulled tight and the unit is

strapped down properly to prevent any damage from occuring.

• House your MP3 player / phone in the soft carry case and use

the included strap (B) to secure it to your vehicle. Ideally

you can mount the carry case around the center tube of

your RV265BT.

• The heavy duty zip ties (C) can be used to secure any loose cables

or for additional mounting support

INSTALLATION

IGNITION

GROUND

The RV265BT comes with a multifunction Bluetooth enabled remote control with a 3.5mm auxillary input port (3.5mm to 3.5mm cable included).

The remote conveniently mounts to the handle bars for easy access. The unit is waterproof and features oversized buttons for use with gloves.

To pair the unit with your Bluetooth enabled device follow the simple steps below and you’ll be listening to your favorite tunes in no time.

• Make sure that your devcice is set to “Discoverable”. Connect the remote control to the corresponding cable from the RV265BT.

Once connected the unit will automatically begin to search for discoverable Bluetooth devices. The LED will ash two times

every second. This indicates that it is searching.

• Once a Bluetooth device is found, the remote control will go into pairing mode. You will hear a long tone and the LED

will ash once every second until pairing is complete. Once paired the LED will remain on.

• If the remote control is disconnected from the device it is paired to, it will autopmatically try to pair with that

device the next time it is turned on. If the previous device is not found in 4 seconds, the remote control will

begin to search for other discoverable devices.

AUXILLARY CONNECTION

• To connect a non Bluetooth device the remote features a 3.5mm input port. It is located on the left side of the unit. Simply use the included 3.5mm to

3.5mm mini jack cable to connect the device to the remote control. Please note that connecting a device to the auxillary port will stop Bluetooth function.

MULTIFUNCTION BLUETOOTH REMOTE CONTROL

SPECIFICATIONS

• Power: 250 Watts RMS, 500 Watts Peak

• Frequency Response: 35Hz - 22KHz

• SPL: 103dB @ 1w/1m

• Height: 7.8˝ (198mm), Length: 26.7˝ (680mm), Width: 10.8˝ (275mm)

ACCESSORIES

• 2 Heavy duty mounting straps for multiple mounting options

• 2 Heavy duty zip ties

• MP3 / Phone soft case with mounting strap

• 5 foot 3.5mm to 3.5mm mini jack MP3 cable

• Multifunction remote control with 3.5mm jack