Rocstor Y10C132-B1 Manual
Portable Security Cable With Combination Lock - Resettable
4-digit - Galvanized Steel, Zinc Alloy - 6 ft For Notebook,
Docking Station, Desktop Computer, Monitor.
TAA Complaint.
Y10C132-B1
1. The factory preset combination is 0-0-0-0.
2. Turn the Dials to the preset combination of 0-0-0-0.
3. Turn the Reset Screw 90° clockwise with a small athead screw driver, paper clip or a similar tool.
4. Choose a desired 4-digit combination number, then turn the Dials and set your desired number.
5. To help remember your personalized combination code, please register your Lock and Code onlite at
www.rocstor.com/locks
6. Rotate the reset screw 90 degrees counterclockwise, back to its original vertical position to save the
new combination.
RESET COMBINATION
Congratulations,
On your new Rocbolt® Combination Laptop Security Lock. Rocbolt® locks
are the easiest and most reliable way to secure your notebook computer
and other devices with the combination lock option.
Dial
Locking Hook
Release Button
Reset Screw
Release Button
1. Select an object in the room to which you will secure your notebook computer with the Rocbolt Cable Lock.
Choose a large, heavy piece of furniture such as table or desk or an irremovable xture
2. Take the looped end of the cable and wrap it around the selected object.
3. Feed the lock through the looped end of the cable as shown.
4. Press and hold the Release Button, then insert the Locking Hook into the locking slot of your notebook or your device.
5. Release the Button and Turn the dials to conceal your combination.
2022
Canada: +1 877 855 1126
United States: +1 818 727 7000
Other Rocstor Cables And Connectors manuals
