ROD iCONIC GRANDE DATE User manual

USER MANUAL
iCONIC
GRANDE DATE
Setting the clock
1. Open the protection’s arm:
Grab the arm protection in the 4 o’clock area and pull outward. The
best way is to pinch the protection arm between thumb and forenger.
2. Unscrew the crown.
3. Push the crown in setting position.
4. Set the clock:
Crown position I Normal function
Crown position II Date setting
An extreme acceleration in setting the date with quick mode can
induce a false date indication
Crown position III Time setting
In this position the watch is stopped. Use this mode to save energy
when you don’t use the watch (saving approx. 70%)
5. Pull the crown in position I.
6. Screw the crown.
7. Close the protection arm.

iCONIC
GRANDE DATE
Setting the date following a battery change
Example: -Date / time on the watch: 28 / 10:10
-Present date / time: 21 / 10 :10
1. Pull out the crown to position II (the watch continues to run).
2. Turn the crown until yesterday’s date appears 9
3.* Pull out the crown to position III (the watch stops).
4. Turn the crown until the correct date (21) appears
5.** Continue to turn the crown until the correct time (10 :10AM)
6. Push the crown into position I.
Changing the battery
To change the battery a special tooling is necessary.
This operation has to be made by a watch retailer service center,
otherwise seal can’t be guaranteed.
Others
In case your watch needs to be repaired or raise claims under guarantee,
please contact the point of sale.
Please note:
*) To set your watch to the exact second, please refer to the chapter
entitled “setting the clock”.
**) Please observe the AM/PM clock rhythm.
USER MANUAL