Roku Touch User manual

Quick Start Guide
© 2018 Roku, Inc. All rights reserved. ROKU,
ROKU TOUCH and the ROKU logo are the
trademarks or registered trademarks of Roku,
Inc. All other trademarks and logos herein are
the property of their respective owners.
Video
tutorials
Wireless
help
Need more help
getting started?
go.roku.com/rthelp
4100000490_2
Stay up to date
with Roku
blog.roku.com
Roku
Blog
TM

3. Enjoy your Roku Touch
tabletop remote!
1. Prepare to pair
• Turn on your Roku TV™.
• Using your existing remote, press
and hold for 5 seconds to get
to the pairing menu.
• Select Remote.
2. Set it up
• Insert the batteries into your
Roku Touch.
• Press and hold the pair button
for 5 seconds.
• The TV will automatically begin
pairing.
Microphone
button
Pair (under battery cover)
Pair - Press to pair to your
Roku device.
Top view
Meet your new Roku Touch
Microphone button - Press
and hold while saying a
command.
Programmable presets
To set: Give a command using the
microphone button. Then, press and
hold a preset button until you hear
a tone.
To use a saved command: Press the
button once.
Pairing to a Roku player? Visit go.roku.com/rt to learn more.
Programmable
presets

4100000489_2
Roku Touch™ (“Remote”)
Important Product Information Safety
Precautions/ Use & Handling
The Remote which accompanies this Important
Product Information is compatible with Roku TVs
that are running Roku® Operating System 8.2 or
higher. Current generation Roku players may also
be compatible. For a list of current compatible TVs
and players and their specific applicable features,
visit go.roku.com/rtdevices.
To help ensure safe and enjoyable operation of the
Remote, please follow these guidelines:
• Observe all warnings, precautions and
instructions.
• Keep the Remote out of the reach of small
children.
• Do not allow liquid, small particles or other
foreign objects to get into the Remote.
• Do not expose the Remote to liquid, smoke or
steam.
• Do not expose the Remote to high
temperatures, high humidity or direct sunlight.
• Do not place the Remote on the floor or in a
place where they may cause someone to trip
or stumble.
• For more information on product safety and
troubleshooting, please go to www.roku.com/
support.
Important Tips About Battery Handling
Replacing batteries: Always replace dead batteries
with two brand-new batteries from the same battery
manufacturer. Never use damaged batteries.
Disposal of batteries: Always dispose of batteries
following federal guidelines or local ordinances. Do
not dispose of used batteries in an open fire.
Warning Signs: If your Remote gets warm/hot
during use, discontinue use and contact Roku
Customer Support immediately at www.roku.com/
support. There is a risk of explosion if a battery is
replaced by an incorrect type.
Limited Warranty & Warranty Service
Process
For any Remote purchased and delivered to end
users in the US, go to www.roku.com/support
for the warranty terms and conditions. You may
also request a copy of such terms by mail by
contacting us at 150 Winchester Circle, Los Gatos,
CA 95032.
Additional Legal Notices
Federal Communication Commission Interference
Statement
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
o and on, the user is encouraged to try to correct
the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
FCC Caution: Any changes or modifications not
expressly approved by Roku, Inc. could void the
user’s authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement: This equipment
complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This transmitter must
not be co-located or operating in conjunction with any
other antenna or transmitter. The availability of some
specific channels and/or operational frequency bands
are country dependent and are firmware programmed
at the factory to match the intended destination. The
firmware setting is not accessible by the end user.
www.roku.com/support