Roline 12.02.1022 User manual

Dockingstation
12.02.1022
Type-C to USB 3.2 Gen.1 2x + RJ45 + HDMI + VGA +
SD/Micro SD + Type-C Data or PD Charging
User Manual

Type-C to USB 3.2 Gen.1X2+RJ45+HDMI+VGA+ SD/Micro SD +Type-C Data or PD Charging Adapter
1
DEAR CUSTOMER
Thank you for purchasing this product. For optimum performance and
safety, please read these instructions carefully before connecting, operating
or using this product. Please keep this manual for future reference.
1.0 INTRODUCTION
This is a USB-C to two USB3.0, RJ45, HDMI, VGA, Micro SD, SD/MMC, Type-
C Data and PD Charging portable dock. The USB 3.2 Gen.1 port allows you
to connect USB device to the host USB-C computer, the USB-C female port
supports both PD Charging and data; the Gigabit Ethernet port allows the
host computer to get access to the network; the HDMI and VGA ports allow
you to enjoy high-definition picture or video on big screen, and the Micro
SD and SD/MMC port allows you to read data in the memory card on the
host PC. It can work on all PCs and mobile phones which support DP Alt
Mode.
2.0 FEATURES
 Interface:
Type-C Female x1 (connect to Type-C host PC with our equipped Type-
C M to M cable)
Type-C Femalex1 (for data and PD Charging)
USB-A Female x2
HDMI Female x1
VGA female x1
RJ45 x1
SD slot x1
Micro SD slot x1
 Supports USB 3.2 Gen.1 super speed (5Gbps) transmission, downward
compatible with USB 2.0
 One of the two USB-A port supports max 7.5W (5V/1.5A) downstream
charging
 Supports 10/100/1000Mbps bandwidth for RJ45 port
 Supports HDMI resolution up to 4Kx2K@30Hz
 Supporst VGA resolution up to 1920x1200@60Hz
 HDMI & VGA can work at the same time at SST mode, the resolution
may downgrade to be compatible with HDMI & VGA monitor.
 Type-C female port supports USB3.0 (5Gbps) or PD Charging 100W
(20V/5A)
 Multiple USB-C interfaces support plug and play, hot swap

Type-C to USB 3.2 Gen.1X2+RJ45+HDMI+VGA+ SD/Micro SD +Type-C Data or PD Charging Adapter
2
 Supports Secure Digital v3.0 UHS-I (Ultra High Speed) SDR12
(12.5Mbyte/s)/SDR25(25Mbyte/s)/SDR50(50Mbyte/s)/DDR50(50Mbyt
e/s)/SDR104(104Mbyte/s)
 Allows SD and Micro SD card to work at the same time
 Supports Fast Role Swap of PD 3.0, the connected device will not get
disconnected while plugging in and out PD Adapter
 Easy to use and carry
Note: Description of the Detached Type-C M to M Cable
1) It is a USB 3.1 Type-C Gen2 Full-featured cable with speed up to
10Gbps; E-marked IC and Vbus current capability up to 5A.
2) This product only functions well with our equipped Type-C M to M
cable or cable produced by us that has the same specification with the
original one. So, to guarantee the proper function of this product, if
the equipped cable is lost, please contact our sales to buy another
cable of the same specification and avoid using cable produced by
other manufacturers.
3.0 SPECIFICATIONS
Input/Output Connector
Input USB-C Female x1
(With our Type-C M to M cable)
Output USB 3.2 Gen.1 Female x2
USB-C Female x1
(For data and Charging)
RJ45 X1
HDMI Female x1
VGA Female x1
Micro SD X1
SD/MMC X1
Power Supply
USB-C Female Port Up to 100W (20V/5A)
4.0 PACKAGE CONTENT
Before attempting to use this unit, please check the packaging and
make sure the following items are contained in the shipping carton:
 Main unit x1
 User Manual x1

Type-C to USB 3.2 Gen.1X2+RJ45+HDMI+VGA+ SD/Micro SD +Type-C Data or PD Charging Adapter
3
5.0 OPERATION
1. Connect the USB-C Female port of this product to an USB-C host
(e.g., Notebook, PC, etc.)
2. Connect the two USB 3.2 Gen.1 outputs of this product to two
USB 3.2 Gen.1/2.0 devices
3. Connect HDMI output of this product to HDTV with one HDMI
cable
4. Connect VGA port of this product to a VGA monitor
5. Connect the Gigabit Ethernet port of this product to an Ethernet
Router with an Ethernet cable
6. Automatically or manually set the IP address of the computer
7. Insert a Micro SD, SD/MMC card into the responding slots
8. Connect the USB-C charging port. It can charge the host
computer and support power for this product simultaneously
6.0 CONNECTION DIAGRAM