Roline 14.01.3575 User manual

1
4K HDMI Switch, 3-way
14.01.3575
User Manual

2
DEAR CUSTOMER
Thank you for purchasing this product. For optimum performance and
safety, please read these instructions carefully before connecting,
operating or adjusting this product. Please keep this manual for future
reference.
1.0 Introduction
This is a high-performance HDMI 3x1 Switch which not only has the
key-press-switching function, but also has intelligent functions.
This HDMI Switch routes high-definition video (in multiple resolutions up
to 4k*2k@60HZ) and digital audio from any one of three sources to
display units.
2.0 Features
 Supports to switch 3 HDMI sources to 1 HDMI display
 Intelligent and mechanical switching
 Support highest video resolutions of up to 4kx2k@60Hz
 Supports HDMI with max 600MHz Bandwidth
 Supports Full 3D
 Equipped with IR
 HDCP Pass through
 Support compressed audio
 EDID bypass
3.0 Specifications
Signal Input/Output
Input Video
HDMI
x3
Maximum Single Link Range Full 3D and 4k*2k@60HZ
Output Video
HDMI
Operating Frequency
Vertical Frequency Range 24/30/50/60Hz
Video Amplifier Bandwidth
6Gbps/600MHz
Resolutions
(HDTV)
Interlaced
(50&60Hz)
480i,576i,1080i
Progressive (50&60Hz) 480p,576p,720p,1080p,4k*2k@30HZ,
4k*2k@60HZ,
Mechanical
Size
(L
-
W
-
H)
8
0
X
58
X
18
mm
Weight
(Net)
47g
Power Requirement
External Power Supply
5V/
1
A
Power consumption (Max) 2W
Note: Specifications are subject to change without notice.

3
4.0 Package Contents
Before attempting to use this unit, please check the packaging and make sure
the following items are contained in the shipping carton:
 Main unit
 Power Adapter
 Remote Control
 User Manual
5.0 Connection
1) Connect the HDMI input source into the HDMI switch (input cables are
optional)
*Please refer to connection diagram section.
2) Press the button to select the inputs
3) It is recommended to give a 5V DC power supply (optional) to the switch.
Attention: Insert / Extract cable gently.
6.0 Operation Notes
1) Once the source device is turned on or plugged in (should stay power-on
mode), the switch will automatically select this source.
2) Once the source device is turned off or plugged out, the switch will select the
next power-on source depending on the sequence automatically.
3) When the source devices are on the stand-by mode, its power supply should
be turned off.
4) When plugged in or out, this switch is completely intelligent.
5) Connect IR remote to the IR port
7.0 Diagram