rollease acmeda Smart Home Hub Manual

budgetblinds.com
Smart Home Collection
Smart Home Collection Hub
Set-Up Instructions for Android
The Smart Home Collection Hub connects to home networks to unlock the luxury of shade control. Experience customization with
scene and timer options as well as voice control via Google Assistant Amazon Alexa.
THE APP ALLOWS FOR:
1. Individual and group control – Group of shades by room and conveniently control them accordingly.
2. Remote connectivity - Control shades remotely, whether home or away on a local network or an internet connection.
3. Scene control - Personalize shade control and organize how your shades operate by specific daily events.
4. Timer functionality - Set and forget. Lower, raise and activate shade scenes automatically at the optimal time.
5. Sunrise and Sunset - Utilizing time zone and location, the Pulse 2 can automatically raise or lower shades according to the
position of the sun.
6. Compatible IoT Integrations:
-IFTTT via applets
-Amazon Alexa devices
-Google Home
-Smart Things
GETTING STARTED:
• In order to experience your shade control through the SHC app, you will need to have:
• Downloaded the free app via the Google Play Store.
• Purchased one or more Hub’s depending on the size of the area you would like to cover.
• Familiarized yourself with the app navigation guide below.
• Created a Location then pair hub to that location. Our step by step guide will explain in more detail.
WI-FI HUB TECHNICAL SPECIFICATIONS:
• Radio Frequency range: 98 feet or 30 meters - (no obstructions).
• Radio Frequency: 433MHz
• Wi-Fi 2.4 GHz or Ethernet Connectivity (CAT 5).
• Power: 5V DC.
• For Indoor UseOnly.
SETUP BEST PRACTICES:
• The Hub must be within signal range of both the shades and the connected via Lan or Wi-Fi router.
• If you chose to use the Wi-Fi network, certify that it must be visible.
• Environments with multiple WAPs (wireless access points) may need all but the main router temporarily disabled.
• Security settings may need to be temporarily disabled.
CAPABILITIES:
• Motors per Hub:20
• Locations per account:5
• Hub’s per location: 5
• Rooms per Location: 30
• Scenes per Location: 15
• Timers per Location: 15

budgetblinds.com
Smart Home Collection
WHAT’S IN THE BOX?
A. B. C. D. E.
UNPACKING THE HUB 2.0
APP NAVIGATION:
Home Page
Home: Shows the main control screen with rooms and devices tabs
Favorites: Allows you to create a list of your favorite Devices or Scenes
Scenes: Show a list of scenes created
Timers: Show a list of scene timers
1. Unpack the Hub.
2. Check the Box Contents.
3. Plug the USB Power
Cord into the Power
Supply
5. Plug the Power
Supply into the outlet
and place the Hub in a
centrally located in
your home.
4. Connect the Micro
USB end into the back
of the Hub.
USB Power
Supply
The Smart Home
Collection Hub
32” (80cm) USB
Power Cord
Ethernet cable
Quick Start Guide
Menu
Rooms
Locations
Devices
Home
Favorites
Scenes
Timers

budgetblinds.com
Smart Home Collection
SETTING UP:
CREATING A LOCATION:
STEP 1 – Open App
Open the SHC mobile App.
STEP 2 – Sign Up
If required, create a new
account. Select Sign Up on the
Top Right corner of the screen.
STEP 3 – Sign Up
Creating an account will require
an email address and password.
STEP 4 – Sign In
If you already have an account
Log in with your account
information.
STEP 5 – Add Location
Open the App from the home
screen and select the menu
button, click “ADD NEW
LOCATION”.
STEP 6 – Add Location
Select the default location and
update the location name if
desired. Select Ok then Done.
STEP 7 – Toggle Location
If you have setup multiple locations,
select the ‘Location’ icon in the upper
right corner to toggle between
locations.

budgetblinds.com
Smart Home Collection
CONFIGURING A HUB:
STEP 8 - Configure a Hub
Select the location desired to add a
new hub to.
STEP 9 - Configure a Hub
Click on “ADD NEW HUB” to
start the process to setting up
your HUB on the App.
STEP 10 - Configure a Hub
Follow on the screen
instructions and click on the
button to connect to NEW
HUB.
STEP 11 - Configure a Hub
Pressing the P button for ~2
secs until the Blue LED begins
flashing. This indicates the hub
is in pairing mode. Press ‘Next’
STEP 12 - Configure a Hub
STEP 13 - Configure a Hub
Make sure that your current
Wi-Fi Network aligns with the
network you want the hub
connected to.
STEP 15 - Configure a Hub
Select your Time Zone. This is
important for timers to operate
correctly.
STEP 14 - Configure a Hub
Open your Wi-Fi settings and connect
to the appropriate RA-PULSE-xxx
network that corresponds with your
hub.
In the app, verify you are connected
to your RA_PULSE-xxxx network,
press ‘NEXT’ to pair the hub.

budgetblinds.com
Smart Home Collection
STEP 16 - Configure a Hub
Verify your Wi-Fi network is listed.
Type in the correct network name if it
is not.
STEP 17 - Configure a Hub
Enter your Wi-Fi networks password.
STEP 18 - Configure a Hub
Press the ‘NEXT’ button to forward
with the Hub configuration.
STEP 19 - Configure a Hub
Wait while the hub connects to your
Wi-Fi Network.
STEP 20 - Configure a Hub
Before selecting ‘NEXT’ verify the
network changes over to your home
Wi-Fi network.
STEP 21 - Configure a Hub
Select ‘NEXT’ to continue the setup
process.
STEP 22 - Configure a Hub
Wait as the hub finalizes the setup.
STEP 23 - Configure a Hub
The Hub is ready to be used! Press
‘DONE’ to start the Application.

budgetblinds.com
Smart Home Collection
HOW TO PAIR A MOTOR TO THE APP:
We recommend setting up your motors with a remote prior to syncing with the App.
STEP 32 – Pair a motor
Choose your pairing method: ‘PAIR USING
HUB’ or ‘COPY FROM REMOTE’.
*We recommend copying from a remote for
the best results.
STEP 33 – Pair with Remote
Ensure the remote is on a channel that has
individual control of the shade to be added.
Remove the remote battery cover and press
the P2 button Twice, then ‘NEXT’.
STEP 34 – Pair with HUB
Press and hold the P1 button on the motor
head ~2 seconds. The motor will jog up and
down once and you will hear one audible
beep. Press ‘PAIR’ on the app screen.
STEP 35 – Pair a motor
Wait as the app searches for the new
device.
STEP 24 – Pair a motor
On the home screen select ‘DEVICES’
then select the ‘Plus’ icon to add a
new shade.
STEP 25 – Pair a motor
From the list select the HUB you wish
to pair the motor too.
STEP 26 – Pair a motor
Select which device type best
represents your shade.
STEP 27 – Pair a motor
Make sure the shade device is
plugged in or ready to be paired and
select ‘NEXT’

budgetblinds.com
Smart Home Collection
HOW TO OPERATE SHADES:
STEP 35 – Pair a motor
If the pairing process was successful, Press
‘NEXT’ to finalize pairing.
If pairing fails, try the process again.
STEP 36 – Shade Details
Input the desired device name. Press
‘DONE’ to complete the setup.
STEP 37 – Pair a motor
The “New Device” will now be added
to the ‘DEVICE’ tab
STEP 38 – Shade Ready
Shade is now ready for operation
from SHC App.
STEP 3 - Close a shade
Open the shade by pressing the “Up
arrow” icon or scrolling the black line
to the top.
STEP 1 – Operate Shade
Select the device that you wish to
operate.
STEP 2 - Open a shade
Close the shade by pressing the
“Down Arrow” icon or scrolling the
black line to the bottom.
STEP 4 - Move a shade
Move the shade to the position
desired by scrolling the black line to
any position.

budgetblinds.com
Smart Home Collection
HOW TO CREATE A ROOM:
STEP 5 – Create a Room
Select the appropriate icon for the
Room.
STEP 6 -Add Shades to a Room
Select ‘ROOM DEVICES’ to add a new
device to the room.
STEP 7 -Add Shades to a Room
Select the devices you wish to be
added to the room.
STEP 8 -Add Shades to a Room
Press ‘DONE’ to complete the setup of
the room.
STEP 4 – Create a Room
Select ‘ROOM PICTURE’ to select an
icon to represent the room.
STEP 1 – Create a Room
Once the Shades are paired to the
App. Click ‘ROOMS’ tab. Select the
“Plus” icon to add a new room.
STEP 2 – Create a Room
Select the ‘ROOM NAME’ to enter the
desired room name.
STEP 3 – Create a Room
Enter the Room Name and click “OK”.

budgetblinds.com
Smart Home Collection
HOW TO CREATE A SCENE:
You can create scenes to set a treatment or group of treatments to specific heights.
STEP 9 -Add Shades to a Room
Wait for the App to conclude the
process of room set up.
STEP 10 – Operate a Room
Select the Room to operate All shades
that have been added to the room at
the same time.
STEP 11 – Operate a Room
Operate all shades in the Room with
the three button options available:
Open, Close and move 50%
STEP 1 – Create a Scene
Select Scenes then, ‘Add New Scene’
to begin programming your desired
scene.
STEP 2 – Create a Scene
Select the ‘SCENE NAME’ to customize
the name of your scene.
STEP 3 – Create a Scene
Input your scene name.
STEP 4 – Create a Scene
Select ‘SCENE PICTURE’ to customize
the icon for your scene.

budgetblinds.com
Smart Home Collection
STEP 8 – Create a Scene
Set the shade height percentage if
necessary. Select ‘DONE’ to create
your scene.
STEP 5 – Create a Scene
Select the icon that represents your
scene.
STEP 6 – Create a Scene
Select ‘UPDATE SCENE DEVICES’ to
add devices into the Scene.
STEP 7 – Create a Scene
Choose custom heights (by %) or set
open/close for all selected
treatments.
STEP 9 – Create a Scene
Wait as the app creates your new
scene.
STEP 10 – Activate a Scene
To activate your custom scene just
press ‘GO’ next to the desired scene
name

budgetblinds.com
Smart Home Collection
PROGRAMMING TIMERS:
You can program timers to trigger the specific operation of your shades and scenes at your desired times throughout the day.
STEP 5 – Create a Timer
Select the appropriate icon for the
Timer.
STEP 6 – Create a Timer
Select the ‘TIMER SCENE’ to choose
the scene you wish the timer to
activate.
STEP 7 – Create a Timer
In the Scene list, add the scenes you
wish to operate.
STEP 8 – Create a Timer
Set the time you wish the timer to
trigger shade control.
STEP 1 – Create a Timer
Select ‘TIMERS’ then, ‘ADD NEW
TIMER’ to program your timer.
STEP 2 – Create a Timer
Select ‘TIMER NAME’ .
STEP 3 – Create a Timer
Input your desired timer name.
STEP 4 – Create a Timer
Select ‘TIMER ICON’ to add an icon
for your timer.

budgetblinds.com
Smart Home Collection
HOW TO CREATE FAVORITE:
HOW TO ADJUST LIMITS:
STEP 3 – Setting Limits
Modify the Top or Bottom position of
the Device as desired
STEP 4 – Setting Limits
Select the ‘Top Position’ to change
the upper limit of your shade. Press
‘OK’ to continue
STEP 1 – Adjust Limits
Select the device you want to adjust
the limits on.
STEP 2 – Adjust Limits
Select ‘EDIT’ in the top right to open
the shades settings page.
STEP 1 – Create a Favorite Device
Select the “Plus” icon to add a
favorite device to your ‘Favorites’
STEP 2 – Edit a Favorite Device
Select ‘EDIT’ in the upper right corner
to remove the favorite device from
your screen.
STEP 3 – Create a Favorite Scene
Select the “Plus” icon to add a
favorite scene to your ‘Favorites’
STEP 4 – Create a Favorite Scene
Select ‘EDIT’ in the upper right corner
to remove the favorite scenes from
your screen.

budgetblinds.com
Smart Home Collection
STEP 5 – Setting Limits
To move your shade a little bit, press
the arrow buttons or slide the double
arrow button. Press ‘SET TOP
POSIITION’ to save.
STEP 6 – Setting Limits
The app will configure the new top
position
STEP 7 – Setting Limits
Press the ‘Bottom Position’ to change
the lower limit of your shade. Press
‘OK’ to continue
STEP 8 – Setting Limits
To move your shade a little bit, press
the arrow buttons or slide the double
arrow button. Press ‘SET BOTTOM
POSIITION’ to save.
STEP 9 – Setting Limits
The app will configure the new
Bottom Position.

budgetblinds.com
Smart Home Collection
HOW TO SHARE THE HUB:
STEP 1 - Share a Hub
In the ‘Add a Hub’ Screen, it is
possible to connect to a shared hub.
STEP 2 - Share a Hub
The HUB must have been shared
from another account.
STEP 3 - Share a Hub
The shared Hub will be listed on the
shared Hubs list to be added.
STEP 4 - Share a Hub
After it is added, the shared hub will
appear under the Location Settings it
was added to with a red ‘S’

budgetblinds.com
Smart Home Collection
LED STATUS INDICATION:
COLOR
RESPONSE
STATUS
Blue LED blinks
Automate Pulse 2 Hub is in pairing mode.
Blue LED short blinks
Automate Pulse 2 is configuring via the App.
Blue LED long blinks
Automate Pulse 2 is Connected to Wi-Fi.
Blue LED short blinks
five times
Automate Pulse 2 is getting a Firmware Updating.
Blue LED is solid
ON App is connected to Automate Pulse 2 Hub.
Red LED short blink
Automate Pulse 2 is Disconnected from the Wi-fi.
Red LED long blinks
Automate Pulse 2 Hub Reset Button Pressed (Paperclip
Needed)
Red LED is solid
Factory Reset Initiated (User can release reset button)
LED is Off
Automate Pulse 2 Hub is OFFLINE

budgetblinds.com
Smart Home Collection
MEANING OF ICONS:
COLOR
RESPONSE
STATUS
Signal Icon
The Shade is connected with the HUB and works
properly.
Battery Icon Green
The Battery Level is over than 70%.
Battery Icon Yellow
The Battery Level is between 50% and 70%.
Battery Icon Red
The Battery Level is less than 50%.
Offline mode
The motor is offline, and the mobile is not in the same
network.

budgetblinds.com
Smart Home Collection
TROUBLESHOOTING:
The following scenarios are common issues that may cause connectivity problems during the Smart Home Collection Hub pairing
process. If you cannot achieve success connecting the Smart Home Collection Hub to your network, please reference the below most
common pairing roadblocks.
I CANNOT CONNECT TO MY HIDDEN WI-FI NETWORK.
The Smart Home Collection Hub does not currently support pairing with hidden networks. To connect to a hidden network, you will need
to unhide the network. Once the network pairing process is complete you can re-hide the network and the Wi-Fi HUB will work without
issue.
I HAVE MULTIPLE ACCESS POINTS AND CANNOT COMPLETE THE PAIRING PROCESS.
If you have multiple wireless access points, we recommend that you turn off all but one to complete the network pairing process. Once
this is complete you can turn on all the wireless access points and the Wi-Fi HUB will work without issue.
I CANNOT CONNECT TO MY 5GHZ WI-FI NETWORK.
The Smart Home Collection Hub does not currently support operation over a 5GHz network. It operates on a 2.4GHz network or using a
LAN CONNECTION (CAT 5). Most routers are dual band and can support both network configurations. Please make sure that the
2.4GHz band is turned on in your wireless router’s settings.
NETWORK SECURITY SETTINGS ARE INTERFERING WITH THE SETUP PROCESS.
Some companies or large corporate offices have network security settings more advanced than the typical homeowner. If you are
setting up in this environment, please consult your network administrator. It may be necessary to enable device-to-device
communication. One solution is to use a device with a mobile data connection available in the background to complete the set-up
process.
MY SMART HOME COLLECTION HUB IS NOT CONSISTENTLY WORKING.
There are many things that can interfere with the radio communication that the Smart Home Collection Hub uses. Try positioning the
Smart Home Collection in a different location and/or closer to the shade to improve performance. Due to varying levels of interference it
may be necessary to purchase additional Wi-Fi HUB to extend the coverage throughout your location.
SUPPORT RESOUCES:
For further assistance, contact your retailer, visit our website at www.budgetblinds.com.