Roller Grill ELR 2 Operation manual

16
INSTRUCTIONS FOR USE AND INSTALLATION
ELECTRIC BOILING TOPS
Made in France
January 2012

ELECTRIC BOILING TOPS
ELR 2 / ELR 3 / ELR 4
Congratulations for the acquisition of this upmarket appliance made in France. You
chose an appliance which alloys the best technical qualities with a big user-friendliness.
We wish you the biggest contentment
1. SECURITY INSTRUCTIONS
Please respect these instructions scrupulously to avoid any risk of fire, electric shock,
scald or other wounds and damage. During the use of this appliance, fundamental cir-
cumspection of security must always be noticed, such as:
-Take into account the instructions to be systematically kept with the appliance.
-Install the appliance always in instructions respect. A 10 cm distance minimum with
the partition or the wall is necessary.
-Protect the appliance from direct light of the sun, frost and humidity.
-Never leave the appliance within the reach of children or disabled persons without
surveillance.
-Never move the appliance when it is working or when the surfaces of cooking are
still hot.
-Check that the appliance is definitely off before connecting it up or disconnecting it.
-Do not touch the hot surfaces of the appliance. The temperature of the hot surfaces
can be very important when the appliance is working. Always use handles and control
knobs.
-Do not use the appliance for other functions than determined use.
-Do not leave the electrical cord in contact of hot surfaces.
-The appliance should not be used close to combustible materials.
-During use, look after not to obstruct hearings of aeration of the appliance
-To avoid any electric shock, never plunge the appliance, the cord or plug in water or
quite other liquid.
-If the cord is harmed, it must be replaced by the producer, his after sale service or
persons of similar skills to avoid any risk.
-Entrust repairs only to a skilled person.
-Use only spare parts of origin.
-At the end of cooking, before cleaning the appliance, do not forget to disconnect it.
215

Nomenclature RECHAUD 2 x 2000 W
Spare parts RECHAUD 2 x 2000 W
14
Rep Code Qty Pièce Spare part
1D03016 2Plaque électrique 2000 WElectric plate 2000 W
254032 1Caisson Casing
3H02054 2Isolant Insulation
4D03018 2Boitier plaque électrique Electric plate box
554033 1Fond socle Bottom casing
6A13003 4Pied Foot
7C01018 1Cable Cord
8A10032 1Presse étoupe 16 Cord closer 16
9A16010 1Plaque à borne Plate for terminal
10 A01018 2Commutateur Commutator
11 A14078 2Bouton Knob
12 A08003 2Voyant orange Orange pilot light
2. CONTENTS OF CARDBOARD PACKAGING
Device: A boiling top
Accessories: - The present note
See exploded views for ELR 2 / ELR 3 / ELR 4 at the end of the document
3. CONFORMITY OF USE
Use the machine only to cook or keep warm some foods.
4. WAY OF FUNCTIONING
These electric boiling tops are compact, in stainless steel with 1 and 2 cooking areas
according to models:
ELR 2 : 1 electric plate diameter 23 cm
ELR 3 : 2 electric plates diameter 18 cm
ELR 4 : 2 electric plates diameter 23 cm
To turn on the plates, turn on the commutator (n°1 on picture) on the wished position,
(from 0 to 6). The pilot light (n°2 on picture) ignites. The appliance is on and is heat-
ing.
The temperature can be regulated thanks to commutator (n°1 on picture).
Commutator
Pilot light on/off
3
1 2
1
2

5. FUNCTIONING / MANIPULATION
a) Installation / assembly:
-Unpack carefully the device of its packaging.
-Place the device on a plane and heatproof surface.
-Never place the device near a wall or near a partition makes of combustible materials
even if it is very well isolated.
-A distance of minimum 10 cm with the partition or the wall is necessary.
b) First starting:
During the first use, warm your machine up outside during about 30 min to evacuate
residual smokes of manufacturing oil from the metallic parts. This may emit a slight
smell for a few moments.
First cleaning
Clean the device before the first use. (See 6 Cleaning)
Connection of the device
-Check that the tension and the frequency of the electricity network suit to the values
indicated on the descriptive plate.
-Check that neither the cord nor the plug are damaged
-Make sure that every control knob is positioned on 0.
-Unwind completely the electric power cable and connect it in a plug connected with
the earth.
-The device is connected.
NB: in case of connection of the device in a plug without earth protection or directly on
the electricity network, confide its connection to a qualified person .
c) Use of device :
Elements of command and display
4
Command/Display Function
Commutator 7 positions
(n°1 on picture)
Position 0
Position 6
Stop
Maximum
Orange pilot light
(n°2 on picture) Warming up (pilot light on) Desired temperature reached (pilot light off)
13

Nomenclature RECHAUD 2 x 1500 W
Spare parts RECHAUD 2 x 1500 W
12
Rep Code Qty Pièce Spare part
1D03015 2Plaque électrique 1500 WElectric plate 1500 W
254034 1Caisson Casing
3H02053 2Isolant Insulation
4D03017 2Boitier plaque électrique Electric plate box
554033 1Fond socle Bottom casing
6A13003 4Pied Foot
7C03013 1Cordon avec prise Cord with plug
8A10032 1Presse étoupe 16 Cord closer 16
9A16010 1Plaque à borne Plate for terminal
10 A01018 2Commutateur Commutator
11 A14078 2Bouton Knob
12 A08003 2Voyant orange Orange pilot light
Putting on
Turn on the commutator (n°1 on picture) on wished position. The orange pilot
light (n°2 on picture) is on. The machine is warming up and is working
Temperature setting
Set the power by positioning the commutator (n°1 on picture) to the desired posi-
tion.
Stopping the appliance
Set commutator (n°1 on picture) on 0: the appliance is no longer functioning.
Disconnect the power cable.
Let the device cool.
Clean the appliance. (see 6. Cleaning)
d) Breakdown / repair:
In case of breakdown or of damaged part, please call your after-sales service and
confide any technical operation to qualified person.
When you contact the after-sales service of your distributor or your store, give him
the complete reference of your device (commercial name, type and serial number).
This information appears on the visible descriptive plate behind the device.
6. CLEANING AND MAINTENANCE
Disconnect the device.
-Let cool completely the device before any technical intervention or cleaning.
- For cleaning, only use non-abrasive products, clean regularly the external walls of
your device with warm water and wash liquid: avoid the abrasive towelling. Rinse
your device with a wet sponge.
-Dry the machine with clean and soft cloth
-Never clean the device under a water jet, the infiltrations would risk to damage it in
a irreparable way.
-Never immerse the device, the cord or the plug in the water or quite other liquid to
avoid any electric shock.
-During a prolonged non-use, we recommend you strongly to keep the device
shielded from the humidity.
5
Stop
Maximum

7. TECHNICAL SPECIFICATIONS
Wires colours correspondence Phase 1Brown
Phase 2Black
Phase 3Grey
Neutral Blue
Earth Yellow-Green
8. NORMS AND LEGALS DISPOSALS
The device is conform to :
IEC/EN 60335-1
IEC/EN 60335-2-36
EN 55014-1 + 55014-2
EN 61000-3-2 + 61000-3-3
9. ELIMINATION OF THE ELECTRIC AND ELECTRONIC WASTE
The device respects the directives:
2002 / 96 / CE ( DEEE) N°34270064800021
2002 / 95 / CE ( ROHS)
2006/95 CE
2004/108 CE
Reach rule
Never put the device among household waste.
The device must be put down in a centre of recycling for the electric equipments.
The materials of the device are indeed reusable. By eliminating correctly the electric
and electronic wastes, the recycling and quite other shape of re-use of worn equip-
ments, you participate in a significant way in the environmental protection.
Model ELR2 ELR 3ELR4
Outside dimensions 350x400x155 mm 600x400x155 mm 600x400x155 mm
Cooking surface 6 Kg 9 kg 10 kg
Weight 2000 W 2 x 1500 W 2 x 2000 W
Power 1 2 2
No element 8 A 13 A 8 A / Phase
Current 220-240 V ~ 220-240 V ~ 380-415 V 3 N~
6 11

10
Rep Code Qty Pièce Spare part
1D03016 1Plaque électrique 2000 WElectric plate 2000 W
254030 1Caisson Casing
3H02054 1Isolant Insulation
4D03018 1Boitier plaque électrique Electric plate box
554031 1Fond socle Bottom casing
6A13003 4Pied Foot
7C03013 1Cordon avec prise Cord with plug
8A10032 1Presse étoupe 16 Cord closer 16
9A16012 1Bornier 2 plots Hole two domino
10 A01018 1Commutateur Commutator
11 A14078 1Bouton Knob
12 A08003 1Voyant orange Orange pilot light
Nomenclature RECHAUD 2000 W
Spare parts RECHAUD 2000 W
For any information about the collection of electric and electronic waste, please con-
tact your distributor.
10. GUARANTEE
Conditions of guarantee
The guarantee applicable to any device is the commercial guarantee of the distributor
or the retailer. Please contact the store where you bought your device to know the
precise conditions.
The guarantee grants no right for damages.
The dispositions which follow are not exclusive of the profit of the legal guarantee
planned by articles 1641 and following ones of the Civil code relative to the defects
and the latent defects.
Exclusion clauses of the guarantee
Bad installation and bad maintenance, in particular if they do not respect cur-
rent regulations or instructions appearing in this user guide.
Cannot benefit from the guarantee the repairs required as a result of false operations,
of inappropriate use, of carelessness or of excess loads of the device, as well as
those resulting from variations of the power supply, over tension or from defective in-
stallations.
The damage due to shocks, bad weather is not flatware by the guarantee. The mate-
rial travels at the risks of the user; in case of delivery by carrier, the consignee has to
have reservations towards the carrier before any delivery of the device.
The guarantee comes to an end in case of intervention, of repair, of modification by no
qualified persons, or of use in inappropriate purposes.
7

.
8 9