rollibot puro User manual

CORDLESS VACUUM CLEANER
USER MANUAL
SAVE THIS MANUAL FOR FUTURE REFERENCE

www.rollibot.com
Customer Service: 1-844-585-6295

Dear Pruo Owner,
Welcome to the new age of cleaning!
The Puro is the modular powerhouse vacuum that leaves your home looking
cleaner than ever before. Whether you need to tidy up your oce, home, or even
your car; use the Puro to take your cleaning to new heights. The Puro switches
instantly from a oor vacuum to a handheld vacuum cleaner at the snap of a
button. Use the multiple attachments to tackle corners, carpets and even pets! The
Puro can be used to clean oor surfaces as varied as hardwood, linoleum, leather,
carpets, and even walls. The Puro was designed to be long lasting, and as powerful
as the day you rst opened it with cyclone technology that eliminates suction loss
when you clean.
Thank you for being a part of the Rollibot family!
— The RolliBot Team

Section 1.S afety Warnings & Guidelines ...........................................................................01
1.1– Safety Warnings ................................................................................................01
1.2– Disposal at End-of-Life.......................................................................................02
Section 2. Vacuum Parts....................................................................................................03
2.1 – Main Parts.........................................................................................................03
2.2 – Buttons & Attachments......................................................................................03
Section 3. Charging Instructions........................................................................................04
Section 4. Usage Instructions............................................................................................05
Section 5. Maintenance Instructions..................................................................................07
5.1 – Canister Parts....................................................................................................07
5.2 – Detaching & Reattaching the Canister.................................................................07
5.3 –Cleaning the Canister..........................................................................................08
5.4 –Cleaning the Filter ..............................................................................................09
5.5 – Cleaning the Floor Tool’s Agitator.........................................................................10
Section 6. Storage Instructions...........................................................................................11
Section 7. Product Specifications..........................................................................................12
Section 8. Troubleshooting...................................................................................................12
Section 9. Warranty..............................................................................................................13
9.1 – Violation..............................................................................................................13
9.2 – Information.........................................................................................................13

This user manual will guide you through the functions and usage of your RolliBot Puro
Cordless Vacuum. It is important that you follow all instructions and take extra caution on all
notes that appear throughout this manual. Consult this manual before you attempt to use
your RolliBot Puro. If you have questions not answered by this manual or are in need of repair
or non-routine service, contact RolliBot customer service at 1-844-585-6295. Before
contacting customer service, please have your purchase information ready as this may be
needed during the call. This information may be recorded below.
Date of Purchase:
Place of Purchase:
Overall Usage
Section 1. Safety Warnings & Guidelines
Notes with this icon MUST be read, understood, and obeyed to prevent injury or
damage etc.
Notes with this icon include relevant information.
Please check the voltage of the adapter before use. Suitable input voltage range is 100-240V~50/60Hz 0.5A
while output range is 26.0V 450 mA.
Always turn the Puro off before transporting or storing.
Clean the outside with dry, non-abrasive cloth only. Do not spray water or liquids onto the Puro.
Do not insert objects into the Puro or allow the Puro to clean up near any part of your body.
The Puro is not a toy. Do not leave children or animals unsupervised around the vacuum.
Do not place the Puro near any source of significant heat or combustible materials.
Do not use the vacuum to clean up anything that is burning or smoking.
Do not use the vacuum to clean up bleach, paint, or other chemicals, or anything wet.
Remove all objects which may cause damage if cleaned up by the Puro or entangled in its brushes including but
not limited to small metal objects like nails and screws, and cords/wires.
The vacuum may only be used on dry, indoor surfaces. Do not use outdoors.
Use extra care when cleaning on stairs.
Do not use the vacuum without the Canister attached.
Always connect or disconnect attachmentswhile the vacuum is off.
Use only the attachments included in the original packaging or received from RolliBot.
Do not use the vacuum for any purpose other than described in this user manual.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
When reading this manual, note these icons:
1.1– Safety Warnings
01

Battery & Charging
Before storing, fully charge the battery to prevent over-discharge due to non-use.
Charge indoors only in a clean and dry environment.
Do not store in a dusty environment as with all electronic devices, dust may cause damage over time.
Do not use an adapter with a damaged cord or plug.
If storing for more than 1 month, remove the battery and store separately.
Even if the battery is stored, place it back in the Puro and recharge it once a month.
If the Charging Base and/or its contacts are damaged or obstructed, do not use it.
If you misplace your adapter and/or Charging Base, visit www.rollibot.com for a replacement.
Batteries perform best after several full charge/discharge cycles.
Please ensure the adapter is fully inserted and/or connected to the wall outlet before charging. Improper
insertion may result in electric shock, short circuiting, smoke, or fire.
Puro may not be used with any type of power converter.
Store the Puro indoors at a dry and stable temperature. Do not store in an unheated garage, shed, or other
location with extreme temperature fluctuations.
Use only the battery included in the original packaging or received from RolliBot.
Use only the adapter included in the original packaging or received from RolliBot.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
This product must not be disposed of by incineration, landlling, or mixing with household
trash. Improper disposal of the battery contained within this product may result in the
battery heating up, rupturing, or igniting which may cause serious injury. The substances
contained inside the battery present chemical risks to the environment. The recommended
disposal for any RolliBot Puro at its end-of-life is to dispose of the entire unit at or through an
e-waste recycling center, program, or facility. Local regulations and laws pertaining to the
recycling and disposal of lithium ion batteries and/or products containing them will vary
according to country, state, and local governments. You must check laws and regulations
corresponding to where you live in order to properly dispose of the battery and/or unit. It is
the user’s responsibility to dispose of their waste equipment properly with accordance with
local regulations and laws.
For additional information about where you should drop o your batteries and electrical or
electronic waste, please contact your local or regional waste-management oce, your
household waste disposal service, or your point-of-sale.
1.2 – Disposal at End-of-Life
02

1 Floor Tool
2 Extension Tube
3 Detachable Handle
4 Main Body Handle
5 Main Body
6 Battery
7 Canister
8 Adapter
9 Charging Base
2.1 – MainParts
10 Tube Lock
11 Main Lock
12 Body Lock
13 Indicator Light
14 Power Switch
15 Battery Lock
16 Canister Clips
17 Canister Lock
18 Crevice Tool& Brush
19 Universal Connector Tube
20 Fabric Tool
21 Dusting Tool
22 Angled Brush Tool
23 Pet brush tool
24 Storage Bag
2.2 – Buttons & Attachments
The Puro Vacuum comes with various parts and attachments. After rst opening your
vacuum, ensure that all the main parts are accounted for.
Section 2. Vacuum Parts
1
2
3
4
5
6
7
8
9
13
14
17 16
17
12
15
11
10
22 23 24
18
19 20
21
03

• The Puro comes with 1x standard filter and 1x sponge filter preinstalled within the Canister.
• The Puro comes with the battery pack preinstalled within the main body of the vacuum.
• The Crevice Tool comes with a sliding brush attached.
• The Connector may come already attached to an attachment. Pull it out to remove it.
• The Charging Base may come unassembled. Push the top piece into the bottom to assemble.
• Charging longer than 5.5hrs may affect battery life.
• Batteries perform best after several full charge/discharge cycles.
• If the Puro doesn’t charge, ensure the adapter is securely connected to its power source.
• If you misplace your adapter and/or Charging Base, visit www.rollibot.com for a replacement.
The Puro comes with a preinstalled 2200mAh,
lithium-ion rechargeable battery . Before using your
vacuum for the rst time, the battery must be charged.
The battery is charged when the Puro connects to its
Charging Base. Ensure the Charging Base is assembled
rst; the top and bottom pieces will snap into place. After
assembly, see the following images and instructions.
Place the Charging Base on the oor.
Place the vacuum into the base so that the
contacts on vacuum’s underside and the contacts
on the base of the Station connect.
Check the adapter for the correct information
(Input 100-240V~50/60Hz 0.5A & Output 26.0V 450
mA) then plug the adapter into the wall.
Charge for 5.5 hours.While charging, the Indicator
will turn red and blink.
When the Puro is fully charged, the Indicator will
stop blinking. Turn o the Puro if it will not be used
immediately.
Use the back of the base to manage adapter cables
as desired.
Use the compartments in the base to store
attachments as desired.
Section 3. Charging Instructions
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
04

The Puro comes with various accessories which can be used depending on your
cleaning needs. When using the attachments, use the Main Body and dierent
connection types according to the type of attachment needed. See below for more
information on how the dierent pieces connect to the vacuum’s Main Body.
When using the vacuum, assemble the desired connection and attachment then turn the
vacuum on. If using the Extension Tube, adding the Detachable Handle may make using
the vacuum easier. Note, the maximum working time for the Puro vacuum is
approximately 25-28 minutes. While using the vacuum, the Indicator near the Power
Switch will turn green and remain on. If the light turns o, the vacuum is on low battery ;
stop cleaning and recharge it. See Section 3 for charging instructions.
Section 4. Usage Instructions
Connection Type Attachment Type Increase line spacing
Universal Connector Tube
Universal Connector Tube
Extension Tube
Or Connector Motorized Floor Tool
Crevice Tool & Brush
Fabric Tool
For general dirt and debris.
For general dirt and
debris in small or hard to
reach areas.
For debris on standard or
low-pile fabrics such as
leather, cotton, and most
other materials, etc.
Dusting Tool
Universal Connector Tube
For dust and debris on
most surfaces and/or in
hard to reach areas.
05

For small, pet-related
debris and/or pet hair.
• Always connect or disconnect attachments while the vacuum is off.
• Do not insert objects into the Puro or allow the Puro to clean up near any part of your body.
• Do not block the Puro's exhaust vents. Obstructing ventilation may cause overheating and malfunctions.
• Do not use the Puro to pick up anything that is burning or smoking.
• Do not place the Puro near any source of significant heat or combustible materials.
• The Puro is not a toy. Do not leave children or animals unsupervised around the vacuum.
• Do not use the vacuum to clean up bleach, paint, or other chemicals, or anything wet.
• Remove all objects which may easily cause damage if cleaned up by the Puro or entangled in its brushes including
but not limited to small metal objects like nails and screws, and cords/wires.
• The vacuum may only be used on dry, indoor surfaces. Do not use outdoors.
• Use extra care when cleaning on stairs.
• Do not use the vacuum without the Canister attached.
• Use only the attachments included in the original packaging or received from RolliBot.
• After using the Puro Vacuum and/or any of its attachments, be sure to turn it off and leave it near its Charging
Base or store as desired. For storage instructions, see Section 6.
Angled Brush Tool
Pet Brush Tool
Universal Connector Tube
Universal Connector Tube
For general dirt and
debris in narrow or hard
to reach areas.
06

As with proper storage, proper maintenance will help improve your Puro vacuum’s
performance. Periodically, the Canister will need to be emptied and its lter cleaned . It is
also recommended to inspect all attachments and clean everything regularly. Please make
sure your vacuum is completely powered o before performing any type of maintenance.
Section 5. Maintenance Instructions
5.1 – Canister Parts
Top
Center Ring
Canister Clip
Canister Lock Bottom
Fitration System
Canister Clip
Filter
Body Lock
5.2 – Detaching & Reattaching the Canister
Press the Body Lock to remove the
Canister from the Main Body of the
vacuum.
Step 1 Reattach the Canister to the Main
Body. For a secure t, make sure the
notches on each part connect.
Step 2
Clean the outside with dry, non-abrasive cloth only. Do not spray water or liquids onto the Puro.
Do not perform any maintenance when the power is on or the battery is charging.
Do not place the Puro near any source of significant heat or combustible materials.
•
•
•
07

If needed, the Canister may be wiped clean on both the interior and exterior with a water-dampened cloth. If any
water comes in contact with the Canister, ensure it is fully dried before reattaching it to the Main Body of the
vacuum. Do not submerge the Canister at any time.
5.3 –Cleaning the Canister
Canister Lock
Filtration System
Detach the Canister from the Main
Body as seen in Section 5.2. Hold the
Canister over a wastebin and press
the Canister Lock to open it. Empty
the bottom.
Step 1 Lift the Canister clips to unfasten the
top and connected Filtration System.
Set these parts aside.
Step 2
Hold the Canister over a waste bin
and empty the top.
Step 3 Return the top and connected
Filtration System to the Canister. Fold
the Canister clips down to refasten
the top. Reattach the Canister to the
Main Body as seen in Section 5.2.
Step 4
08

• Allowing debris to remain in the filter will keep the Puro’s filtration from working properly.
• If rinsed, the filter MUST be fully dried before reinstalling. If water enters the inside of the Puro, the vacuum may
sustain serious internal damage.
• To purchase additional filters, please visit our website at www.rollibot.com.
Do not dry in any kind of oven or via heaters or dryers.
5.4 –Cleaning the Filter
Detach the Canister from the Main
Body as seen in Section 5.2. Holding
the top and bottom of the Canister,
twist the top until it opens.
Step 1 Take out the Filter and separate the
mesh from the sponge.
Step 2
Rinse one or both parts of the lter if
desired. After rinsing, allow 24 hours’
time for the lter to dry.
Step 3 Reinstall the lter and top of the
Canister then reattach the Canister to
the Main Body as seen in Section 5.2.
Step 4
High Effiency Filter
09

5.5 –Cleaning the Floor Tool’s Agitator
Detach the Floor Tool from the
vacuum. Use the notch to turn the
latch’s lock counter-clockwise.
Step 1 Remove the latch. Step 2
Lift the agitator up slightly and
carefully pull the belt o.
Step 3 Lift the agitator out, hold it over a
waste bin, and shake o any dust.
Pull or cut out any entangled debris
as needed.
Step 4
Replace the agitator, pull the belt
back on the right side, and replace
the latch.
Step 5 Use the notch to turn the latch’s
lockclockwise.
Step 6
12Belt
10

Before using your vacuum, ensure the storing environment is suitable. Properly storing your
Puro will help improve performance and battery life expectancy.
• Always turn the Puro off before transporting or storing.
• Before storing, fully charge the Puro to prevent battery over-discharge due to non-use.
• Do not store in a dusty environment as, with all electronic devices, dust may cause damage over time.
• If storing for more than 1 month, remove the battery and store separately.
• Even if the battery is stored, place it back in the Puro and recharge it once a month.
• Store the Puro indoors at a dry and stable temperature. Do not store in an unheated garage, shed, or other location with
extreme temperature fluctuations.
Any attachment with bristles can be cleaned the same way as a brush. Hold the attachment over a waste bin,
shake off any dust, and pull or cut out any entangled debris as needed.
Section 6. Storage Instructions
Ensure the Puro is fully charged. Charge it if needed.
Turn the Puro o.
If the vacuum will not be used for a long period of
time, remove the battery.
Store the Puro and its battery indoors at a dry and
stable temperature.
Step 2
Step 3
Step 4
Step 1
1.Press
Pull
11

Section 7. Product Specifications
Section 8. Troubleshooting
Items
Dimensions 45.9x8.6x 8.4in.
Net Weight 3~5 lbs.
Battery Type 2200 mAh, Lithium-Ion
Charging Time 5.5 hrs.
Working Time 25-28 min.
Main Body Motor DC22.2V/120W Max (Puro 100) &DC22.2V/140W Max (Puro 200B)
Floor Tool Motor DC22.2V/6W
Suction (psi) 1.45-1.60 (Puro 100) &0.73~0.94 (Puro 200B)
Max. Suction Power ~25AW (Puro 100) &~20AW (Puro 200B)
Dust Filter Eciency 95%
Sound Level ≤ 76 dB
Canister Capacity 16oz (0.5 L)
Filtration System Multi-level + High-Performance Filter
Operating Temperature 63°F to 73°F, <70% RH
Adapter Input 100-240V~50/60Hz 0.5A
Adapter Output 26.0V 450 mA
Parameters
Problem Possible Cause Solution(s)
The vacuum
won’t charge.
The vacuum
doesn’t work.
The vacuum’s
suction is weak.
Dust is escaping
the vacuum.
1. The contacts on the Charging
Base or underneath Puro may need
cleaning.
2. The contacts are not touching.
1. The vacuum isn’t receiving
power.
2. The battery is dead.
2. The battery is low.
1. Likely, the Canister is full.
2.The Canister is open.
1. Likely, the Canister is full.
2. Recharge the vacuum.
1. Clean out the Canister.
2. Ensure the lock button at the bottom
of the Canister is not open.
If the information in Section 8 did not resolve your issue, please visit our website at
www.rollibot.com or contact customer support 1-844-585-6295.
1. Clean out the Canister.
2. Recharge the vacuum.
1. Clean all contacts with dry, non-abrasive
cloth then resume charging.
2. Ensure the Puro’s Main Body is fully
seated in the Charging Base. The vacuum
will not charge if the contacts do not touch.
1. Ensure the battery is fully installed in the
Main Body. Remove and reinstall if needed.
12

The vacuum cannot be repaired or serviced within its warranty period if any of the following
has occurred:
Your RolliBot Puro Cordless Vacuum(“Product”) includes a One Year Limited Hardware Warranty
(“Warranty”). The Warranty covers product defects in materials and workmanship under normal
use. This Warranty is limited to residents of the United States and Canada only and is available
only to original purchasers. This Warranty gives you specic legal rights and you may also have
other rights which vary from state to state.
This Warranty starts on the date of your purchase and lasts for one year (the“Warranty Period”).
The Warranty Period is not extended if the Product is repaired or replaced. We may change the
availability of this limited warranty at our discretion, but any changes will not be retroactive.
Warranty services are provided by Warranty Pro. If a hardware defect arises and a valid claim is
received within the Warranty Period, at its option and to the extent permitted by law, RolliBot
will: (1) repair the hardware defect by using new or refurbished parts that are equivalent to
new in performance and reliability; or (2) exchange the Product with a product that is new or
refurbished which is substantially equivalent to the original product. This Warranty is for one
replacement only of like-items and does not cover items out of production if the product is no
longer made or stocked. This Warranty is not assignable or transferable. The original purchaser
may call RolliBot’s toll-free number at 1-844-585-6295 for service request.
When a product or part is exchanged, any replacement item becomes your property and the
replaced item becomes RolliBot’sproperty. This warranty only covers technical hardware
defectiveness during the warranty period and under normal use conditions. RolliBot does not
warrant uninterrupted or error-free operation of this Product.
This Warranty does not cover any damage due to: (a) transportation; (b) storage; (c) improper
use; (d) failure to follow the product instructions or to perform any preventive maintenance; (e)
modications; (f) unauthorized repair; (g) normal wear and tear; or (h) external causes such as
accidents, abuse, or other actions or events beyond our reasonable control.
Important: Do not disassemble the Product. Disassembling the Product will void this Warranty.
Only RolliBot or a party expressly authorized by RolliBot should perform service on this
Product.
DISCLAIMER OF WARRANTY: THE REMEDIES DESCRIBED ABOVE ARE YOUR SOLE AND EXCLUSIVE REMEDIES AND
OUR ENTIRE LIABILITY FOR ANY BREACH OF THIS LIMITED WARRANTY. OUR LIABILITY SHALL UNDER NO
CIRCUMSTANCES EXCEED THE ACTUAL AMOUNT PAID BY YOU FOR THE DEFECTIVE PRODUCT, NOR SHALL WE
UNDER ANY CIRCUMSTANCES BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL OR PUNITIVE
DAMAGES OR LOSSES, WHETHER DIRECT OR INDIRECT.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,
SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
THE DURATION AND REMEDIES OF ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE
WARRANTIES OF MERCHANTABILITY.
• Failure to store the vacuum properly as indicated in this manual
• The warranty has expired
• Damage occurred during or in relation to non-routine and/or unauthorized disassembly
• Failure to provide a valid proof of purchase when requesting service or repair
• Damage occurred as a result of natural disaster etc.
• Damage occurred due to unexpected factors or man-made reasons (including
mis-operation, uid found in any openings, improper insertion or pulling, hauling, bumping,
impropervoltage input and others).
Section 9. Warranty
9.1 – Violation
One Year Limited Hardware Warranty
9.2 – Information
13