rollibot RolliCute User manual

ROBOTIC VACUUM
USER MANUAL
TM

www.rollibot.com
Customer Service: 1-844-585-6295

Contents
Section 1. Safety Warnings & Guidelines.....................................................1
1.1 — Safety Warnings.....................................................................................................1
1.2 — Disposal at End-of-Life.........................................................................................2
Section 2. Parts & Assembly.................................................................................3
2.1 — Box Contents...........................................................................................................3
2.2 — Components Overview .......................................................................................3
2.3 — Battery Information & Installation....................................................................4
2.4 — Assembly .................................................................................................................5
Section 3. Usage..........................................................................................................6
3.1 — Charging ..................................................................................................................6
3.2 — Using.........................................................................................................................8
3.3 — Storing......................................................................................................................8
Section 4. Maintenance ..........................................................................................9
4.1 — Removing the Dustbin .........................................................................................9
4.2 — Cleaning the Dustbin............................................................................................9
4.3 — Replacing the Filter............................................................................................ 10
4.4 — Cleaning & Replacing the Brushes ................................................................. 11
Section 5. Troubleshooting & Information .............................................. 12
5.1 — General Issues ..................................................................................................... 12
5.2 — Status Indicator Issues ...................................................................................... 13
Section 6. Warranty Information.................................................................... 15

1
Section 1. Safety Warnings & Guidelines
This user manual will guide you through the functions and usage of your RolliBot. It is important
that you follow all instructions and regard all notes that appear throughout this manual.
Consult this manual before you attempt to use your RolliBot RolliCute. If you have questions
not answered by this manual or are in need of repair or non-routine service, contact RolliBot
customer service at 1-844-585-6295. Before contacting customer service, please have your
model number and purchase information ready as any of these may be needed during the call.
1.1 - Safety Warnings
When reading this manual, note these icons:
Notes with this icon MUST be read, understood, and obeyed to prevent injury or damage
etc.
Notes with this icon include relevant information
Overall Usage
• RolliCute is for indoor use only.
• Do not use the RolliCute on any other surface besides ooring.
• Do not use the RolliCute on shag carpet, high-pile carpet, tassels, or fabric with loose
edges.
• Before using the RolliCute, remove all objects which may easily sustain or cause
damage if bumped such as glass decor, loose fabrics like rug tassels or edges, pet food
containers, etc.
• Remove all objects which may easily cause damage if cleaned up by the RolliCute or
entangled in its brushes including but not limited to small metal objects like nails and
screws, and cords/wires.
• RolliCute is not a toy. Do not sit or stand on any part of the device.
• Do not leave children or animals unsupervised around the RolliCute.
• Clean the outside with dry, non-abrasive cloth only. Do not spray water or liquids onto
the RolliCute.
• Do not insert objects into the RolliCute or allow the RolliCute to clean up near any part
of your body including but not limited to your ngers or hair etc.
• Do not use this device to clean up anything that is burning or smoking.
• Do not place the RolliCute near any source of signicant heat or combustible materials
including but not limited to lighters, matches, open ames, heaters, or ammable
liquids.
• Do not use this device to clean up bleach, paint, or other chemicals, or anything wet.
• Use a physical barrier to prevent access to balconies and ensure safe operation.
• Always turn the RolliCute o before transporting.

2
Battery & Charging
• Refer any non-routine battery maintenance to RolliBot.
• Product may not be used with any type of power converter.
• Use only the charger supplied by the manufacturer to charge this device.
• Use only the battery included in the original packaging or received from RolliBot as a
replacement.
• Use only the charger included in the original packaging or received from RolliBot as a
replacement.
• Do not use a charger with a damaged cord or plug.
• Charge indoors only.
• Keep the charging environment clean and dry.
• Never handle chargers with wet hands.
• Please ensure the charger is fully inserted and/or connected to the wall outlet before
charging. Improper insertion may result in electric shock, short circuiting, smoke, or re.
• Before storing, fully charge the RolliCute to prevent battery over-discharge due to non-
use.
• If storing for more than one month, discharge and recharge the battery every three
months.
• Store the RolliCute indoors at a dry and stable temperature. Do not store in an unheated
garage, shed, or other location with extreme temperature uctuations.
• Cover the RolliCute to protect it from dust. Do not store in a dusty environment as, with
all electronic devices, dust may cause damage over time.
• It is recommended to charge the battery at least 16 hours before using the RolliCute for
the rst time. Batteries perform best after several full charge/discharge cycles.
• Always disconnect the RolliCute from the charger before cleaning.
1.2 – Disposal at End-of-Life
This product must not be disposed of by incineration, landlling, or mixing with household
trash. Improper disposal of the battery contained within this product may result in the battery
heating up, rupturing, or igniting which may cause serious injury. The substances contained
inside the battery present chemical risks to the environment. The recommended disposal for
any RolliCute at its end-of-life is to dispose of the entire unit at or through an e-Waste recycling
center, program, or facility. Local regulations and laws pertaining to the recycling and disposal
of lithium ion batteries and/or products containing them will vary according to country, state,
and local governments. You must check laws and regulations corresponding to where you live
in order to properly dispose of the battery and/or unit. It is the user’s responsibility to dispose of
their waste equipment properly with accordance with local regulations and laws.
For additional information about where you should drop o your batteries and electrical
or electronic waste, please contact your local or regional waste-management oce, your
household waste disposal service, or your point-of-sale.

3
Section 2. Parts & Assembly
2.1 - Box Contents
The RolliCute also contains 1x preinstalled lter.
2.2 - Components Overview
1x RolliCute Robotic Vacuum 1x Battery
1x Cloth Base 1x User Manual
1x Screwdriver
2x Microber Cleaning Cloth
4x Edge Brush Caps &
4x Edge Brushes
1x Charger
4x Screws
Bumper
Top Cover
Charge Port
Status Indicator
Power Switch
Top View

4
2.3 - Battery Information & Installation
The RolliCute comes with a 1500mAh capacity Nickel Metal Hydride (NiMH) rechargeable
battery and, when properly cared for, has a 4-5 hour charging time. Install it before proceeding.
Refer any non-routine battery maintenance to RolliBot.
Use only the battery included in the original packaging or received from RolliBot as a
replacement.
Step 1. Using the arrows as a
guide, gently press on the top
cover and pull it to remove it.
Step 2. Locate the battery
cords and the RolliCute’s cords.
Hold down the tabs on each
and connect the two.
Bottom View
Edge Brush
Edge Brush Dust Collection Port
Cli Sensor
Cli Sensor
Cli Sensor
Right wheel
Left wheel
press pull
RedWhiteBlack
Hold side tabs down to connect.
Press down on the snap-joint to
disconnect.

5
Step 3. Carefully push the
connected cords into the
corner slot.
Step 4. Fully insert the battery
into its compartment using the
tabs on top if needed.
Step 5. Replace the top cover.
2.4 - Assembly
See the following images and instructions to assemble the outer parts of the RolliCute.
Step 1. Thread the bristles of two edge
brushes through two edge brush caps then
push the caps down until they attach to the
brushes.
Step 2. Turn over the RolliCute and press
the edge brushes onto their designated
shafts.
Step 3. Using the included screwdriver and
two of the screws, secure the edge brushes
to the underside of the RolliCute.
Step 4. Optionally, attach
a microber cleaning cloth
to its base. Then, attach the
base to the underside of the
RolliCute. The cloth may be
lightly dampened before
attachment if desired.
Microber Cleaning
Cloth
Base
Assembled

6
Section 3. Usage
• RolliCute is for indoor use only.
• Do not use the RolliCute on any other surface besides ooring.
• Do not use the RolliCute on shag, high pile carpet, tassels, or fabric with loose edges.
• Before using the RolliCute, remove all objects which may easily sustain or cause
damage if bumped such as glass decor, loose fabrics like rug tassels or edges, pet food
containers, etc.
• Remove all objects which may easily cause damage if cleaned up by the RolliCute or
entangled in its brushes including but not limited to small metal objects like nails and
screws, and cords/wires.
• RolliCute is not a toy. Do not sit or stand on any part of the device.
• Do not leave children or animals unsupervised around the RolliCute.
• Clean the outside with dry, non-abrasive cloth only. Do not spray water or liquids onto
the RolliCute.
• Do not insert objects into the RolliCute or allow the RolliCute to clean up near any part
of your body including but not limited to your ngers or hair etc.
• Do not use this device to clean up anything that is burning or smoking.
• Do not place the RolliCute near any source of signicant heat or combustible materials
including but not limited to lighters, matches, open ames, heaters, or ammable
liquids.
• Do not use this device to clean up bleach, paint, or other chemicals, or anything wet.
• Use a physical barrier to prevent access to balconies to ensure safe operation.
• Always turn the RolliCute o before transporting.
How It Works
The RolliCute can be used for cleaning various surfaces including but not limited low pile
carpet (0.5in or 1.5cm), wood or laminate ooring, linoleum, and ceramic tile etc. in indoor
environments.
The RolliCute uses patternless, intelligent movement to cover as much area as possible while its
edge brushes actively draw debris inward to ensure it gets cleaned up. If attached, microber
cloth can sweep or mop up any dust or debris left over.

7
3.1 - Charging
Before using your vacuum, it must be charged. See the following image and instructions.
Step 1. Locate the charging port on the side of the RolliCute near the power switch.
Step 2. Ensure the charging port is dry and otherwise free of debris.
Step 3. Plug the charger into the wall then plug the other end into the RolliCute. The Status
Indicator will blink during charging.
Step 4. When the RolliCute is fully charged, the Status Indicator will stop blinking and remain
on. After it is fully charged, disconnect it from the charger.
• It is recommended to charge the battery at least 16 hours before using the RolliCute for
the rst time. Batteries perform best after several full charge/discharge cycles.
• After the initial charge, the charging time is approximately 4-5 hours. Charging longer
may aect battery life.
• If the Status Indicator does not turn on and/or does not blink, check that the charger is
connected securely to the wall and to the RolliCute.
• Charge according to these instructions, otherwise the battery may sustain damage.
• If you misplace your charger, please visit our website at www.rollibot.com for a
replacement.
• Product may not be used with any type of power converter.
• Use only the charger included in the original packaging or received from RolliBot as a
replacement.
• Do not use a charger with a damaged cord or plug.
• Charge indoors only.
• Keep the charging environment clean and dry.
• If the charging port is damp or obstructed, do not use it.
• Never handle chargers with wet hands.
• Please ensure the charger is fully inserted and/or connected to the wall outlet before
charging. Improper insertion may result in electric shock, short circuiting, smoke, or re.
Power Switch
Charging Port
Status Indicator

8
• Before storing, fully charge the RolliCute to prevent battery over-discharge due to non-
use.
• Store the RolliCute indoors at a dry and stable temperature. Do not store in an unheated
garage, shed, or other location with extreme temperature uctuations.
• Always disconnect the RolliCute from the charger before cleaning.
3.2 – Using
Before using your vacuum for the rst time, ensure it is fully charged, all parts are installed, and
your cleaning environment is free of obstacles such as small power cords, pet food containers,
and loose fabrics. After this, see the following steps:
Step 1. Click the power switch on the side of RolliCute to turn it on. Once on, the Status
Indicator will turn on and the brushes will start to rotate as the RolliCute begins a quick self-test.
Step 2. Once the self-test is complete and all components are ready, the Status Indicator
will turn o and the RolliCute will move randomly as it begins to clean. The average cleaning
duration will last approximately 80 minutes.
Step 3. After cleaning, the RolliCute will stop. Locate your vacuum, turn it o, and store it in a
suitable location.
• Empty the dustbin and clean the brushes and lter after every 3-4 uses.
• When the battery is low, the Status Indicator will blink twice continually or the RolliCute
will stop working.
• If there is an issue detected during the self-test, the Status Indicator will blink according
to the type of error detected. Refer to Section 5.2 for more details.
• If the RolliCute blinks for any other issue besides a low battery, place it on level ground
and restart it. If restarting it does not resolve the issue, contact customer service.
3.3 – Storing
Before storing your vacuum, ensure the storing environment is suitable. Properly storing your
RolliCute will help improve performance and battery life expectancy.
Step 1. Ensure the RolliCute is fully charged. Charge it if needed.
Step 2. Turn the RolliCute o.
Step 3. Store the RolliCute indoors at a dry and stable temperature.
• Always turn the RolliCute o before transporting.
• Before storing, fully charge the RolliCute to prevent battery over-discharge due to non-
use.
• If storing for more than one month, discharge and recharge the battery every three
months.
• Store the RolliCute indoors at a dry and stable temperature. Do not store in an unheated
garage, shed, or other location with extreme temperature uctuations.
• Cover the RolliCute to protect it from dust. Do not store in a dusty environment as, with
all electronic devices, dust may cause damage over time.

9
Section 4. Maintenance
As with proper storage, proper maintenance will help improve your RolliCute’s performance.
Periodically, the RolliCute’s dustbin will need to be emptied and its lter changed. Please make
sure your vacuum is completely powered o before performing any type of maintenance.
• Clean the outside with dry, non-abrasive cloth only. Do not spray water or liquids onto
the RolliCute.
• Do not insert objects into the RolliCute or allow the RolliCute to clean up near any part
of your body including but not limited to your ngers or hair etc.
• Do not perform any maintenance when the power is on or the battery is charging.
4.1 - Removing the Dustbin
See the following images and instructions.
Step 1. Using the arrows as a
guide, gently press on the top
cover and pull it to remove it.
Step 2. Locate the dustbin.
Using the notches at either
side, grasp the dustbin and
carefully lift it out of the
RolliCute.
press pull

10
4.2 - Cleaning the Dustbin
The dustbin should be removed and cleaned after every 3-4 periods of substantial cleaning or as
needed. See the following images and instructions.
Step 1. After removing the dustbin,
push the edges of the lid up to lift it
o and remove it.
Step 2. Dump out the dustbin. If
needed, remove and tap the lter to
shake o any debris.
Step 3. Replace the dustbin lid and
press the edges to securely reattach it.
Step 4. Put the dustbin back inside
the RolliCute and replace the top
cover.
• The dust box and lter can be cleaned with water if needed. After rinsing, fully dry both
the dustbin and lter before placing them back in the RolliCute. If not fully dried, the
RolliCute’s internal parts may be damaged or the ltering may not work.
• Failure to regularly empty the dustbin will keep the RolliCute from working properly.
4.3 - Replacing the Filter
The RolliCute comes with one pre-installed lter. To purchase additional lters, please visit our
website at www.rollibot.com. Additional lters may be changed as needed. See the following
images and instructions.
Step 1. Remove the dustbin and
its lid to locate the lter, then
remove the lter.

11
Step 2. Push open each of the
four tabs to separate the lter
brackets.
Step 3. Pull the lter from its
brackets.
Step 4. Using a new or cleaned
and dried lter, push it onto the
lter bracket’s pegs.
Step 5. Reassemble the lter
brackets and check that the four
tabs are securely closed.
Step 6. Put the lter back inside
the dustbin.
Step 7. Put the dustbin back
inside the RolliCute and put the
top cover back on.

12
4.4 - Cleaning & Replacing the Brushes
The RolliCute comes with four edge brushes, two for initial installation and two extra to use as
replacements. See the following image and instructions for information on how to clean and
replace the edge brushes.
Step 1. Turn over the
RolliCute and use the
included screwdriver to
unfasten the screws and
remove the edge brushes
from their designated
shafts.
Step 2. Tap the brushes
to shake o any debris. If
there are any items twisted
or caught in the bristles,
carefully pull these out by
hand.
Step 3. Rinse the brushes
with water and allow them
time to dry completely.
Step 4. Ensure the brushes
are dry and reinstall them
on the bottom of the
RolliCute.
To replace the brushes, discard the old brushes and install new ones.
Step 1. Thread the bristles of two edge brushes through two edge brush caps then push the
caps down until they attach to the brushes.
Step 2. Turn over the RolliCute and press the edge brushes onto their designated shafts.
Step 3. Using the included screwdriver and two of the screws, secure the edge brushes to the
underside of the RolliCute.

13
Section 5. Troubleshooting & Information
5.1 – General Issues
Q: Why did the RolliCute suddenly get louder?
A: Something may have gotten stuck on the bottom of the RolliCute. Turn o the RolliCute and
check the underside for debris or blockages. Clear away any obstructions.
Q: Why did the RolliCute stop working?
A: The RolliCute may have encountered an issue. Check the Status Indicator near the power
switch. If it is blinking, refer to the next section for more information.
Q: The RolliCute is stuck, what should I do?
A: Turn o the RolliCute and check underneath. Something may be stuck in or on the underside.
If uneven terrain is the issue, place something heavy and durable atop the uneven edge. If the
RolliCute enters this area, it should bump into the obstacle and avoid it rather than attempting
to move forward.
Q: The RolliCute fell down the steps. Are the cli sensors working?
A: There may be an issue with the sensors. Check the bottom of the RolliCute around the sensors
for dust or debris and clean as needed. Additionally, you can check the top of the stairs for
excess debris or obstacles.
Q: Why does the RolliCute retreat during cleaning?
A (1): The lighting may be generating heat. Do not have the RolliBot operate under direct
sunlight.
A (2): The carpeting or oor surface may be too dark and/or causing issues with the sensors. The
RolliCute may recognize dark surfaces as clis or edges.
Q: Why isn’t the RolliCute picking up dirt or debris?
A: Likely, the dustbin is full. Clean out the dustbin and brushes and restart cleaning.
5.2 – Status Indicator Issues
When the RolliCute encounters errors certain issues, the Status Indicator next to the power
switch will blink in dierent patterns to communicate the issue. Count the number of blinks in
the pattern and refer to the table below.
Blink
Number
Cause Solution(s)
0 RolliCute is fully
charged
No issue. The RolliCute should operate as
normal.
1 RolliCute is charging No issue. Continue charging as needed. Average
charging time is 4-5 hours.
2 Battery is low Connect the RolliCute to its charger and allow it
to recharge.
3 Bumper error Check the bumper for debris or blockage. Clean
as needed.
4 Cli sensor error Check the cli sensor surfaces for debris or
blockage. Clean as needed.

14
5 Main brush error Check the brush bristles for tangles or blockage.
Clean as needed.
6 Left wheel error Check the wheels for debris or blockage. Clean
as needed.
7 Right wheel error Check the wheels for debris or blockage. Clean
as needed.
8 Fan error Clean the entire RolliCute and restart it.
If the information in Sections 5.1 or 5.2 does not resolve your issue, please visit our website at www.rollibot.com or contact customer
support 1-844-585-6295.

15
Section 6. Warranty Information
One Year Limited Hardware Warranty
YOUR ROLLICUTE ROBOTIC VACUUM “PRODUCT” INCLUDES A ONE YEAR LIMITED
HARDWARE WARRANTY “WARRANTY”. THE WARRANTY COVERS PRODUCT DEFECTS
IN MATERIALS AND WORKMANSHIP UNDER NORMAL USE. THIS WARRANTY IS LIMITED
TO RESIDENTS OF THE UNITED STATES AND CANADA ONLY AND IS AVAILABLE ONLY TO
ORIGINAL PURCHASERS. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY
ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
THIS WARRANTY STARTS ON THE DATE OF YOUR PURCHASE AND LASTS FOR ONE YEAR
THE“WARRANTY PERIOD”. THE WARRANTY PERIOD IS NOT EXTENDED IF THE PRODUCT IS
REPAIRED OR REPLACED. WE MAY CHANGE THE AVAILABILITY OF THIS LIMITED WARRANTY AT
OUR DISCRETION, BUT ANY CHANGES WILL NOT BE RETROACTIVE.
WARRANTY SERVICES ARE PROVIDED BY WARRANTY PRO. IF A HARDWARE DEFECT ARISES
AND A VALID CLAIM IS RECEIVED WITHIN THE WARRANTY PERIOD, AT ITS OPTION AND TO
THE EXTENT PERMITTED BY LAW, ROLLIBOT WILL: 1 REPAIR THE HARDWARE DEFECT BY
USING NEW OR REFURBISHED PARTS THAT ARE EQUIVALENT TO NEW IN PERFORMANCE
AND RELIABILITY; OR 2 EXCHANGE THE PRODUCT WITH A PRODUCT THAT IS NEW OR
REFURBISHED WHICH IS SUBSTANTIALLY EQUIVALENT TO THE ORIGINAL PRODUCT. THIS
WARRANTY IS FOR ONE REPLACEMENT ONLY OF LIKEITEMS AND DOES NOT COVER ITEMS
OUT OF PRODUCTION IF THE PRODUCT IS NO LONGER MADE OR STOCKED. THIS WARRANTY
IS NOT ASSIGNABLE OR TRANSFERABLE. THE ORIGINAL PURCHASER MAY CALL ROLLIBOT’S
TOLLFREE NUMBER AT 18445856295 FOR SERVICE REQUEST.
WHEN A PRODUCT OR PART IS EXCHANGED, ANY REPLACEMENT ITEM BECOMES YOUR
PROPERTY AND THE REPLACED ITEM BECOMES ROLLIBOT’S PROPERTY. THIS WARRANTY
ONLY COVERS TECHNICAL HARDWARE DEFECTIVENESS DURING THE WARRANTY PERIOD AND
UNDER NORMAL USE CONDITIONS. ROLLIBOT DOES NOT WARRANT UNINTERRUPTED OR
ERRORFREE OPERATION OF THIS PRODUCT.
THIS WARRANTY DOES NOT COVER ANY DAMAGE DUE TO: A TRANSPORTATION; B
STORAGE; C IMPROPER USE; D FAILURE TO FOLLOW THE PRODUCT INSTRUCTIONS OR TO
PERFORM ANY PREVENTIVE MAINTENANCE; E MODIFICATIONS; F UNAUTHORIZED REPAIR;
G NORMAL WEAR AND TEAR; OR H EXTERNAL CAUSES SUCH AS ACCIDENTS, ABUSE, OR
OTHER ACTIONS OR EVENTS BEYOND OUR REASONABLE CONTROL.
IMPORTANT: DO NOT DISASSEMBLE THE PRODUCT. DISASSEMBLING THE PRODUCT WILL
VOID THIS WARRANTY. ONLY ROLLIBOT OR A PARTY EXPRESSLY AUTHORIZED BY ROLLIBOT
SHOULD PERFORM SERVICE ON THIS PRODUCT.
DISCLAIMER OF WARRANTY: THE REMEDIES DESCRIBED ABOVE ARE YOUR SOLE AND
EXCLUSIVE REMEDIES AND OUR ENTIRE LIABILITY FOR ANY BREACH OF THIS LIMITED
WARRANTY. OUR LIABILITY SHALL UNDER NO CIRCUMSTANCES EXCEED THE ACTUAL
AMOUNT PAID BY YOU FOR THE DEFECTIVE PRODUCT, NOR SHALL WE UNDER ANY
CIRCUMSTANCES BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL OR PUNITIVE
DAMAGES OR LOSSES, WHETHER DIRECT OR INDIRECT.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO
YOU.
THE DURATION AND REMEDIES OF ALL IMPLIED WARRANTIES, INCLUDING WITHOUT
LIMITATION THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE LIMITED TO THE DURATION OF THIS EXPRESS LIMITED WARRANTY.