Rolls RA163 User manual

ROLLS
ROLLS
8 CHANNEL
8 CHANNEL
DISTRIBUTION
DISTRIBUTION
AMPLIFIER
AMPLIFIER
ROLLS
5968 SOUTH 350 WEST S.L.C.,UT 84107
PHONE: [phone]
FAX: [phone]
RA163
DATA SHEET FOR RA163 www.rolls.com
1X8 MONO OR 2X4 STEREO
BALANCED XLR INPUTS
AND OUTPUTS
8 CHANNEL XLR DISTRIBUTION AMP
MADE IN USA
SPECIFICATIONS
The RA163 is an eight channel distribution amp. It
has independent volume attenuation for each
channel, and 1X8(mono) or 2X4(stereo) compat-
ibility. Balanced XLR jacks for all inputs and
outputs. The RA163 also has volume knobs on the
front panel and access to the stereo/mono switch.
The chassis is made of powder coated steel and
uses an IEC 120V power cord, no wall wort
adapter with this professional grade distribution
amp. Designed for installations where you need to
send a line level signal to more than one amplier
with NO SIGNAL LOSS or impedance issues.
pwr
1 2 3 4 5 6 7 8
1234 12 34
GAIN
0 dB
+20 dB
MONO
STEREO
8 Channel Mono 4 Channel Stereo
DISTRIBUTION AMPLIFIER PRO PLUS
LEFT RIGHT
RA163
MADE IN USA
www.rolls.com 1X8
2X4
STEREO MONO
CONFIGURATION
SWITCH
OUTPUTS
SERIAL NUMBER
RISQUE DE CHOC - NE PAS ENLEVER
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
MODEL RA163
12341234 STEREO
RIGHT LEFT
12345678 MONO
MADE IN USA
www.rolls.com
120 VAC 50/60 Hz 15 VA
WARNING: DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
INPUTS
MONO INPUT
RIGHT LEFT
75889 01630 76
Input Impedance: 20 KΩBalanced
Max Input Level: +22 dBV
Output Impedance: 100 ΩBalanced
Max Output Level: +24 dB
Max Gain: 20 dB
S/N Ratio: >90 dB
Frequency Response: 10 Hz - 40 kHz, +/- 1 dB
THD: <.008%
Power: 120 VAC 50-60 Hz, 15VA
Size: 19” x 1.75” x 3.5”
(48 x 4.5 x 17 cm)
Weight: 7 lbs. (3 kg)