Rolls RA62c User manual

RA62c Six Channel Headphone
Mixer/Amplifier
RA62c Six Channel Headphone
Mixer/Amplifier
RA62c Six Channel Headphone
The ROLLS RA62c is a six-channel headphone/earphone amplifier for professional audio moni-
toring. A variety of input options are available including 1/4”, RCA, and balanced XLR. Since the
MONO/STEREO switch is after the pan control, it will mix 2 MONO signals and their balance can
be adjusted with the Pan control. With the addition of rear panel Direct Input connectors, each
channel may mix a second stereo signal
.
FEATURES:
• Six Channels of clean, quiet headphone/earphone amplification
• Individual Direct Inputs to mix separate stereo signal with Main Input signals
• 1/4" and 3.5mm Headphone/Earphone Outputs
• LED Clip indication
•
Stereo/Mono operation
SPECIFICATIONS
Input Impedance: 10
K
Ohms
unbalanced
Max Input Level: +18 dBV
Input Connectors: 1/4" TRS stereo, R & L bal. / unbal. 1/4"
RCA, R & L balanced XLR
6: 1/4" TRS Direct Input jacks
Outputs: 12: 1/4" TRS Stereo jacks
6: 1/8" (3.5 mm) TRS Stereo jacks
Max Gain: 20 dB/Channel
Max Output Power: up to 300 mW/side, 600 mW/Channel ( @ 16 Ohms )
Frequency Response: DC - 30 kHz
S/N Ratio: 90 dB
THD: <.008%
IMD: <.008%
Phase Shift (In to Out): 0 deg.
Slew Rate: 25 V
per microsecond
Second
Crosstalk: - 65 dB
Power 12 VAC (Rolls Model PS12)
Weight: 7 lbs (3KG)
Size: 19” x 1.75” x 6.5” (48cm x 4.5cm x 17cm)
ROLLS Coporation
5968 South 350 West, Salt Lake City, UT 84107
[phone] FAX [phone]
[email protected] • www.rolls.com