Rolls RPB486 User manual

RPB623 PHANTOM HEX
Six Channel Phantom Power Supply
The RPB623 is an ultra clean six channel 48 volt phantom power
supply. The unit powers up to six condenser microphones for use in
digital multitrack recording situations, or contractor applications
where several mics must be powered from a single source.
SPECIFICATIONS
Connectors: 6 ea. XLR female jacks (pin 2 hot)
6 ea. 1/4. TRS jacks (tip positive)
Phantom Power Voltage: 48 Volts
Max Phantom Power Current: 14 mA each channel
Power Supply: Linear 120VAC 50/60Hz
Size (W x H x D): 19" x 1.75" x 2.5" (48 x 4.5 x 12.7)
Weight: 4 lbs.
FEATURES:
. 6 XLR Mic inputs and 1/4" TRS balanced outputs
. 48 Volts of regulated phantom power for each input
. Front panel LED indication for channel "in-use"
. Clean, quite internal power supply
. Pull-down resistors and isolation capacitors on all outputs to
minimize the possibilit y of equipment damage downline
ROLLS
ROLLS
Phantom
Phantom
Power Supply
Power Supply
ROLLS
5968 SOUTH 350 WEST S.L.C.,UT 84107
PHONE: [phone]
FAX: [phone]
DATA SHEET FOR RPB486 www.rolls.com
XLR INPUTS
1/4” OUTPUTS
TRUE 48 VOLT PHANTOM POWER
Phantom Hex
MADE IN USA
RPB486
INPUTOUTPUT
CHANNEL ONE
INPUTOUTPUT
CHANNEL TWO
INPUTOUTPUT
CHANNEL THREE
INPUTOUTPUT
CHANNEL FOUR
INPUTOUTPUT
CHANNEL FIVE
INPUTOUTPUT
CHANNEL SIX
MODEL RPB486
120 VAC
50/60 Hz 15 VA
SERIAL NUMBER
486-
WARNING: To reduce the risk of electric shock or fire, do not expose
this device to rain or moisture. CAUTION: To reduce the risk of electric
shock do not remove lid. No user serviceable parts inside.
Refer servicing to qualified service personnel.
MADE IN U.S.A
PWR
RPB486