Ronix RX-AH04J User manual

Real time Recording &
Full HD Display DVR
Before installing and using this product,
please read the instruction fully and keep it handy for late use.
720P1080P
Operating Instruction
QUICK GUIDE

Features
Real Time Recording & Full HD Display
Composition
• 4/8/16ch Stand-alone HD Display Real time DVR (1080p)
• Independent for each channel resolution, quality and frame rate setting
• Camera menu control through UTC (16ch only)
• Quick search using up to 256 times normal speed playback feature
• Bookmark during playback, Repeat playback
• Using bookmark backup
• Self-diagnostic capabilities in the network connection
• Set your own domain name is possible with default Mac. address based domain name
• Possible to recover system by power outages during upgrade
• S.M.A.R.T. function for Harddisk
• E-mail notification function
• Admin + 100 users account setting
• Mac Windows 100% compatible CMS
• Mobile Viewer: iPhone / iPAD, Android support
• Audio support
DVR Set
Instruction CD
HDD mounting screws
(4ch: 4pcs) (8ch/16ch : 8pcs)
Adaptor & Power cable
Quick Guide Remote Controller
Mouse

Name and Function of Each Part
Real Time Recording & Full HD Display
REC
PTZ ESC
MENU
PLAY MULTI
1 2 3 4 5
6 7 8 9 0
PW
IR
1. FRONT PANEL
2. REAR PANEL - 16CH
①
②REC Record button
③PLAY Playback
④PTZ PTZ control button
⑤MULTI Multiple channel view button 4~10
⑥ESC Multiple channel view button 4~10
⑦MENU Enter the main menu setting
⑧5 Commands buttons Move the cursor Up/Down, Left/Right
Select (Set )mode in the menu
①Numeric buttons Channel selection, Number input
(10CH => 0+0, 11CH=> 0+1, ~ 16CH=> 0+6 )
⑨IR Reciever
⑩Power button Power ON/OFF
⑪LED Recording
⑫LED Event
⑬LED Power
⑭ USB port USB port
⑭
①
⑪
⑬
⑫
② ③ ④ ⑤ ⑥ ⑦
② ③ ④ ⑥ ⑦
⑧
⑧
⑩
⑨
Name Function
①VIDEO IN Camera Video Input
②HD OUTPUT HD Output Port
③AUDIO OUT Audio Output
④VGA Port VGA Output
⑤ETHERNET Ethernet Connector
⑥USB Port USB Port(Do not use upper & front USB port at the same time)
⑦MULTI Port Sensor Input, Relay Output
⑧ POWER INPUT Power input connector(Adaptor)
Name Function
VIDEO IN
AUDIO
VGA
NET
AUDIO IN 2-8/16
POWER
HD OUTPUT
13
15
14
11
12
9
10
7
8
5
6
3
4
1
1
2
2
16
ALARM
⑤

Name and Function of Each Part
Real Time Recording & Full HD Display
3. REAR PANEL - 8CH
4. REAR PANEL - 4CH
① ② ③ ④ ⑥ ⑦⑧
①VIDEO IN Camera Video Input
②AUDIO OUT Audio Output
③ HD OUTPUT HD Output Port
④VGA Port VGA Output
⑤ETHERNET Ethernet Connector
⑥USB Port USB Port(Do not use upper & front USB port at the same time)
⑦MULTI Port Sensor Input, Relay Output
⑧ POWER INPUT Power input connector(Adaptor)
Name Function
⑤
①VIDEO IN Camera Video Input
②HD OUTPUT HD Output Port
③AUDIO IN/OUT Audio Input/Output
④VGA Port VGA Output
⑤ETHERNET Ethernet Connector
⑥USB Port USB Port(Do not use upper & front USB port at the same time)
⑦MULTI Port Sensor Input, Relay Output
⑧ POWER INPUT Power input connector(Adaptor)
Name Function
VIDEO IN
AOUT
SPOT OUT
AN1
AN2
VGA
NET
AUDIO IN
USB
HD OUT
1
2
3
4
5
6
7
8
ALARM
VIDEO IN AUDIO
IN1
OUT
IN2 IN3 IN4
VGA NET AUDIO IN
POWER
VIDEO OUT
HD OUTPUT
3
4
1
2
ALARM
① ② ③ ④ ⑥ ⑦ ⑧
⑤

Specifications
Real Time Recording & Full HD Display
ITEM 4CH 8CH 16CH
Video Input 4ch BNC 8ch BNC 16ch BNC
1ch
SATA 1 SATA 2
1ch
1, 4ch 1, 4, 9ch 1, 4, 9, 16ch
1ch HD OUTPUT, 1ch Spot (Multi channel), 1ch VGA 1ch HD OUTPUT, 1ch VGA
Quadplex
H.264
Video Output Monitor
Resolution
No. of Frame
Quality
Max.
Speed
(720p/
1080p)
NTSC
PAL
Mode
Max. Speed
Resolution
Mode
Speed
Multi Screen
No. of Input
No. of Output
Multitasking
Sensor Input
Alarm(Relay) Output
Motion Detection
Recording
Audio
No.of HDD(SATA)
Storage
Backup
Password Protection
Speed
Codec
Bandwidth Limit
Network
PTZ Control
Method
Blackout
Protection
Interface
SW Upgrade
Power Source Consumption
Dimension (mm)
Operating Temperature
Display
Search
Playback
Video Compression
1920x1080, 1024x768, 1280x720, 1280x1024, 1440x900
1,2,3,4,5,6,7,10,15,30 (NTSC,10 Steps) / 1,2,3,4,5,6,7,9,12,25 (PAL,10 Steps)
4 Levels (Low, Medium, High, Super)
120fps @720p/960H/D1
100fps @720p/960H/D1
60fps @1080p
50fps @1080p
120fps @1080p
100fps @1080p
240fps @1080p
200fps @1080p
240fps @720p/960H/D1
200fps @720p/960H/D1
480fps @720p/960H/D1
400fps @720p/960H/D1
Schedule, Manual, Continuous, Continuous+Event
120fps (NTSC)
100fps (PAL)
240fps (NTSC)
200fps (PAL)
480fps (NTSC)
400fps (PAL)
Up to HD 1080p
Quick, Calendar, Bookmark, Event (Sensor, Motion Detection), USB
x1,x2,x4,x8,x16,x32,x64,x128,x256, Field by Field (Forward,Backward) x1/4,
x1/2 Slow Motion (Forward Only), Repeat A-B
Not Available
Not Available
10/100Base-T (Static, DHCP, E-mail ), DDNS server available
Dual Codec. (H.264)
Yes
22x15 (NTSC) / 22x18 (PAL), 8Level Sensitivity
HDD, USB Flash Memory, Network
101 Level (admin / 100 users)
RS-485
USB Flash Memory, Network
Yes
12VDC/ 5A
+5°C ~ +40°C
12VDC/ 3A 12VDC/ 3.5A
320(W)x255(D)x53(H) 375(W)x275(D)x53(H)
NTSC
PAL

Setup menu
Real Time Recording & Full HD Display
①View 1
②View 4
③View 9
④View 16
⑤SEQ
⑥PTZ
⑦Freeze
⑧ Zoom
Single screen selection menu
4-split screen selection menu
9-split screen selection menu
16-split screen selection menu
Running the sequence mode
PTZ menu (only single screen mode)
Runnning freeze
Running zoom (only single xcreen mode)
⑨Record
⑩Menu
⑪Search
⑫Backup
⑬Remote DVR
⑭Log off
⑮Power off
Turning on and off the recording
Enter the main setup menu
Enter the search menu
Enter the backup menu
View a Remote DVR
Log off
Power off
Name Function
1-1. Password
The default password is 1234 for entering DVR menu and connecting through network.
■Mouse menu
1-2. SETUP
DVR setup menu.
The detailed settings are
avaiable on the System,
Network, Record, Disk,
Event, Account, Camera,
Info. memu.
②
③
④
⑥
⑦
⑧
⑨
⑤
①
⑪
⑫
⑬
⑭
⑩
⑮
Name
Time Format 1
DVR
Network Record HDD Event Camera Info
Language
SW Upgrade
Configuration
Buzzer
Display
Auto Reboot
AccountSystem
Time Date
Name ID
Apply

Setup menu
Real Time Recording & Full HD Display
Search menu displays as shown above . Depending on search method, Quick, Calendar, Bookmark,
Event, USB search options are available.
1-3-1. Quick SEARCH
Select the point of playback. User can select one of the following for qucik playback. 2 minutes ago,
10 minutes ago, 1 hour ago, 6 hours ago, 1 day ago.
1-3-2. Calendar SEARCH
Calendar search function is supported. Identifying the presence of recorded video per channel is easy.
The time zone which the recording data exists is displayed with different colors. Red(Manual or
Continous record), Green(Motion record), Orange(Sensor record).
1-2-1. DDNS
Default shows default address based on the MAC address. Hostname can be set by user's preference
for domain name. Type the word you want to use, press Check button, you can check the presence of
the name in the DDNS server. If the name is not used currently, you can use the domain name with
MAC address-based domain name. It provides the convenience of network connection.
1-3. SEARCH
Check
Default
Hostname
.eznetdns.com
0010c0.eznetdns.com
Record HDD Event Camera Info
Stream
Client Info
Remote DVR
Status
AccountSystem
DDNS
TCP/IP
Apply
Network
Search
Quick
Calendar
Bookmark
USB
Event
Exit
Quick
2 minutes ago
10 minutes ago
1 hour ago
1 day ago
6 hours ago
Exit

Setup menu
Real Time Recording & Full HD Display
①Time
②Playback Speed
③Stop
④Reverse
Display Playback time
Display Playback speed
Stop of Playback
Reverse Playback
⑤Playback
⑥Pause
⑦Slow Playback
⑧Fast Playback
Playback
Pause
Slow playback (x1/4~x1/2)
Fast playback (x2 ~ x256)
Name Function Name Function
■Playback Menu Bar
■PLAYBACK Mouse menu
1-3-3. Bookmark to PLAY
Bookmark search function is supported. The list of bookmarks are displayed. It is convenient to use
bookmarks on the plaback buckup.
1-3-4. Event
Event search is supported. Select start time, end time and channels that you want to search in the event
search menu, then event lists that occurred during that time period are displayed.
Split-screen seletion, playback related buttons are displayed.
User can select the playback screen mode which is single, 4-split, 9-split,
16-split support zoom fuction at display mode. User can set a bookmark
during playback.
The saved bookmarks are used A-B repeat during playback.
1-4. PLAYBACK
• Device : Select the device you want to back up. USB memory is available.
• File Format : Select the file format to back up. HAV, AVI can be selected. EZPlayer will be stored together
when HAV format is selected. The backed up data is displayed using EZPlayer without an additional
program installation. The backed up files using AVI format can be playbacked as a normal media player.
• Time Setting : Select the time to back up. Start and end time of backup can be set by time or bookmarks.
• Channel Selection : All channel or individual channel can be selected. After selecting the channel, you can
back up by pressing the Backup button. During backup, the progress bar is displayed for noticing the status.
1-5. BACKUP
① ② ③ ④ ⑥ ⑦ ⑧
⑤

Setup menu
Real Time Recording & Full HD Display
1-6-1. CMS
Network monitoring program is provided. It supports Windows PC and Mac PC.
1-6. NETWORK MONITORING
CPU Intel Pentium 4 / 3.0GHz Intel Core 2 Duo / 2.2GHz
Main Memory 1GB 2GB
Video Memory 128MB 256MB
Display Resolution 1280 x 1024 (with 32bit color) or higher 1280 x 800 (with 32bit color) or higher
Hard disk 120GB or higher 120GB or higher
OS Windows XP SP3 or higher Mac OS X 10.6 or higher
DirectX Version 9.0 or higher 9.0 or higher
Double click the CMS_VerX.X.X_Setup.exe file in the provided CD or downloaded. CMS icon will be
created on your desktop.
► SYSTEM Requirements
► Installation and Connection
Item Windows PC Mac Book
1) Open the CMS program
2) Click the mouse right button as below and select ‘Add DVR’
3) After clicking the Add DVR, enter the information of DVR which you want to Add.
Input the name in the name field and input the DDNS address in the Address field. MAC address based
default address(ex. 010000.eznetdns.com) and user-defined address(ex.home.eznetdns.com) are both
possible. The default ID/PW are admin/1234. Press OK button, the DVR will be added on the list.

Setup menu
Real Time Recording & Full HD Display
• Live S :
This mode is for controlling one DVR.
• Live M :
Multiple DVR control mode. Up to 256 channels that is divided into 4 pages configured by 64 channels
can be managed. The method of adding DVR on the list is same. When you want to make connection,
dobleclick the Group name or click 'Connect' on the pop-up menu appearing by clicking the right button
of the mouse. DVR connections belonging to the group are made.
• Search : Search and playback the remote DVR through the network.
• Playback : Playback the backup data on the PS or USB memory.
• Backup : Backup the remote DVR data through the network.
• E-map : Monitoring and cotroling the DVR using the map image through the network.
• DVR Configuration : Check and change the DVR configuration through the network.
• PC Configuration : Check and change the CMS-related configuration of the PC
4) Select the ‘Connection’ by clicking the mouse
right button on DVR list you added or
doble-click
the DVR name
. The DVR will be connected.
5) If you to edit the DVR name or DVR Group,
click the ‘Edit DVR’ on menu bar as below.

Setup menu
Real Time Recording & Full HD Display
1-6-2. Mobile
• Multi channel Live monitoring , PTZ control, Search and Multi channel playback(Audio support),
Remote relay control,
Selecting the stream type can be possible.
• Install and run the application.
Provide Real-time video monitoring, recorded video search function using a smart phone.
Android App: Search ‘ronix’ or ‘rview’ and install the application ‘RVIEW’
iPhone / iPad App: Search ‘rview’ and install the application ‘RVIEW’
1) Add : After clicking the Add button, enter the information
of DVR which you want to Add.
Enter a name in the DVR name and a DDNS address in
the Address field.
MAC address based default address(ex.010000.eznetdns.
com) and user-defined address(ex. home.eznetdns.com)
are both possible. Input port number in the port field.
The default ID/PW are admin/1234.
Press OK button, the DVR will be added on the list.
2) Edit : Press the Edit button to edit the information
of the selected DVR.
3) Delete/Exit : Press the Delete/Exit button to delete
or exit the App.
If selects ‘Delete’ menu
, confirmation message will
pop up for deletion the selected DVR on the list.
• After selecting the DVR from the list, press the Connection button, then DVR will be connected.

RME0800-V4
QUICK GUIDE for
Real time Recording & Full HD Display DVR