ROOPOD M-B5-2 User manual
BABY SAFETY SEAT
INSTRUCTION
M-B5-2
www.roopod.co.uk
IMPORTANT:KEEP FOR FUTURE
REFERENCE. READ CAREFULLY
WARNING: "Do not leave
the child UNATTENDED
1. Always use the restraint system;
2. “Falling hazard”-Prevent your child from climbing on the product.
3. DO NOT use the product unless all components are correctly fitted
and adjusted;
4. Be aware of the risk of open fires and other sources of strong heat
in the vicinity of the product;
5.Be aware of the risk of tilting when your child can push its feet
against a table or any other structure.
SAFETY TIPS
1.Do not use the product until the child can sit up unaided
2.Keep children away when unfolding and folding the product to avoid injury;
3.The child safety seat is intended for children able to sit up unaided and up to 36 months or a maximum weight of 15 kg
4.DO NOT use the baby seat if any part is broken, torn or missing.
5.All assembly fittings should always be correctly tightened and checked regularly.
6.Warning: BE AWARE of the risk of an open fire or other sources of strong heat such as electric bar fires, gas fires, etc.,in
the vicinity of the product.
7.We recommend that for safe use of the product, the unit is installed to brickwork or blockwork using fixings that are
appropriate to the wall.
8.Any additional or replacement parts shall only be obtained from the ROOPOD agent.
9.All recommended fixings are supplied. Do not use less substantial fittings.We recommend the use of torque controlled
power tool to fully tighten the fixings. This ensures that the fixing plug opens and firmly grips the substrate.
10. This unit does not require a changing pad and therefore, no pad is supplied with this product.
11.Ensure that all fixings are checked and tightened as necessary. Protruding fixings present the risk of clothing or
accessories(e.g. strings, necklaces, ribbons for babies, dummies, etc.) becoming entangled and exposing the child to
risk of injury.
12. Units should be fitted no less than 100mm from the corner of the room to facilitate cleaning.
13. Keep all packaging away from children. Dispose of the packaging in accordance with the regulations of local authorities.
14.Be sure to check all packaging materials for any small parts that may have come loose during transportation.
CLEANING, CARE & MAINTENANCE
Clean with a damp cloth
For more stubborn stains a domestic cream cleaner can be used.
DO NOT use any abrasive cloths, caustic or solvent cleaners as these
may damage the product.
CARE & MAINTENANCE
Open the unit and check that all wall mounting fixings are secure. Any
replacement parts must be obtained from ROOPOD LTD.
ATTENTION COMPLIANCE
This product conforms the applicable standards within:
BS EN12221-1:2008+A1:2013;
BS EN14988:2017+A1;
BS EN16120:2012+A2
Every effort is made to ensure all details are correct at the time ofgoing
to press, however, ROOPOD reserve the right to change specifications
without notice.
ROOPOD Ltd, BOURNEMOUTH, UNITED KINGDOM
ACCESSORIES INSTALLATION INSTRUCTION
1.
Backrest
2.
Main body
3.
Guardrail
4.
Support frame cover
5.
Cover fixing hold position
9 6. Combination bolts(Model B)
7. Mounting hole decorative cover(Model B)
8. Mounting hole decorative cover(Model A)
9. Restraint Belt
Tools Required for Assembly
(Not included)
Take off the support frame cover Hang the unit on the hook and
fix the screws
Model A Model B
6 7 8 9
