Rosen VoiceCom 2000 User manual

V
oiceCom 2000TM
Quick Start Guide
Congratulations on your purchase of a Rosen VoiceCom 2000TM Voice Activated Hands-Free Car Kit.
This Quick Start Guide helps you step by step through the initial Bluetooth pairing process.
It is highly recommended that you consult your mobile phone's manual to get familiar with its Bluetooth functionality.
Preparations: Turn on Bluetooth on your mobile phone (see mobile phone's manual).
! Caution: Do not proceed with any pairing procedures of your VoiceCom system while you are driving
!
Step 1
Please scroll down to new user then press the round phone button.
Select the desired display language and confirm by pushing the round phone button.
Your VoiceCom system is now searching for other Bluetooth devices in range.
After the search is completed, your VoiceCom system provides a list of
discovered Bluetooth devices.
* Note: You may need to place your phone in discoverable mode - consult phone manual
Step 2
Please scroll up , select "Phone inquire..." on your VoiceCom system and
confirm by pushing the round phone button.
Your VoiceCom system will prompt you to use your mobile phone to start the
pairing process.
After a short delay, the VoiceCom system provides a security code, which has to
be entered in Step 3.
Step 3
Please use your phone to search for other Bluetooth devices. Consult the
manual of your mobile phone to see how to search for other Bluetooth devices
with it.
Select your "VoiceCom 2000" system and confirm.
Enter the provided security code (Step 2) on your mobile phone when requested
and confirm by pushing the round phone button.
Your VoiceCom system will confirm if the code entered is correct and accepted.
Step 4
Congratulations - you successfully paired your VoiceCom system with your
mobile phone.
The VoiceCom system will now download the phonebook if supported by your
mobile phone.
The available Voice Commands are on the backside of this paper.
Enjoy your VoiceCom 2000TM system.
The complete user manual is available at www.rosenentertainment.com
C2006 ROSEN ENTERTAINMENT SYSTEMS. All rights reserved. All copyrights are held by ROSEN ENTERTAINMENT SYSTEMS or by the original creator.

VoiceCom 2000 TM Voice Commands & Features
Command Overview for Rosen's VoiceCom 2000TM
After pushing the following voice commands are available:
USER:
SYSTEM:
USER:
SYSTEM:
USER:
USER:
SYSTEM:
USER:
SYSTEM:
USER:
SYSTEM:
USER:
SYSTEM:
USER: STORE
USER:
SYSTEM:
USER:
SYSTEM:
USER:
SYSTEM:
USER:
SYSTEM:
USER:
SYSTEM:
USER:
SYSTEM:
USER:
SYSTEM:
USER:
SYSTEM:
USER:
SYSTEM:
USER:
SYSTEM:
USER:
SYSTEM:
USER:
Other Features
NOTE: Due to differences in cellular providers you may experience Dual ring tones, one from the
VoiceCom and one from your cell phone. If this situation occurs you can turn off the ring tone of either
the VoiceCom or your cell phone. Refer to your cell phone Owners Manual to turn off the ringer by
placing it on vibrate or silent.
911
Will repeat the number back to you (911)
STORE
"Delete Name"
"Redial"
"Cancel"
"Store Emergency
Number"
YES
The Name Is Removed
Press activation button on display, listen for beep, then SAY "REDIAL"
"Dial Number"
"Store Name"
"Dial Name"
"Say Names"
DELETE (if the number or a part of the number is wrong)
DIAL (if the number is correct)
The Number Is Dialed
Press activation button on display, listen for beep, then SAY "DIAL NUMBER"
The Number Please
858 566 2159
Will repeat the number back to you (858 566 2159)
Press activation button on display, listen for beep, then SAY "SAY NAME"
The Number Is Dialed
Will repeat the stored names
The Name Please
Will repeat the name back to you (JUDY)
DIAL
Seven different ring tones are available. To access the ring tones push the left Talk button, press the
up/down arrow buttons to select “Audio”, then push Talk button. Highlight Ring Tone and push Talk
button. Then rotate through 7 Ring Tone options including “Mute” and push Talk button to confirm the
tone you want.
To answer a call waiting call, push the left Talk button which will answer the second call and put the first
call on hold. To toggle between calls, just push the Talk button again.
ROSEN ENTERTAINMENT SYSTEMS z1120 California Avenue zCorona, CA 92881
Call Waiting
Conference Calling
Text Messages
Ring Tone
While connected to an active call, answer the call waiting call using above instructions. Push the left
arrow button and “Swap” will appear on the screen. Push the arrow down button until Conference is
highlighted then push the left arrow button and the calls will be conferenced together.
The display indicates new received text messages with acoustic signal and “Envelope” icon on the
display. To display text messages (inbox and outbox), push the left Talk button once, then push
up/down arrow buttons to find and highlight “Messages.” Press the up/down buttons, then highlight
“Inbox” or “Out Box”, and push Talk button. Highlight the message you would like to read and push the
Talk button. You will then be given the choice to “Read” or “Delete” message. If you select “Read”, the
message will be displayed. If you select “Delete” the system will ask you to confirm the delete.
The Number Please
Would You Like To Remove The Name?
Press activation button on display, listen for beep, then SAY "DELETE NAME"
The Name Please
BOB
The Number Is Dialed
Press activation button on display, listen for beep, then SAY "CANCEL"
Cancelled
Press activation button on display, listen for beep, then SAY "STORE EMERGENCY NUMBER"
The Name Please
Press activation button on display, listen for beep, then SAY "STORE NAME"
Press activation button on display, listen for beep, then SAY "DIAL NAME"
BOB
BOB
The Number Please
858 566 2159
Will repeat the number back to you (858 566 2159)