120 mm Dual Ring RGB Case Fans
(3-Pack) and Hub Set RGBF-S12001
Installation
1. Connect the fan cable into the RGB Fan Hub slots labeled “Fans” and
attach fans with mounting screws in the system.
2. Connect the RGB Fan Hub.
2-1 Turn your system off prior to installing the RGB Fan Hub.
2-2 Plug the 3-pin connector to the addressable 5V* RGB header
of your motherboard and other end to M/IN on hub as another
control option for system synchronization.
2-3 Connect the power cable to the RGB Fan Hub and connect
the other end to your power supply.
3. Mount the RGB Fan Hub to a desired location within the system via the
attached magnet on the back of the RGB Fan Hub.
4. To switch from remote controller to
motherboard system synchronization,
press the remote control’s “ON” button.
Press “ON” again to return back to remote
control.
1
3
Power Cable
For ASUS/MSI Power
M/IN
1
1
2-3
2-2
M/B
Addressable
RGB header
For GIGABYTE
3-Pin Connector Cable
