Rosewill RC601 User manual

2 Port USB2.0 PCMCIA Card RC601
User Manual

2 Port USB2.0 PCMCIA Card RC601 User Manual
Features and Benefits
zFully supports EHCI and OHCI Compliant standards
zCompliant with Universal Serial Bus specification revision 2.0
zProvides two external Type A USB 2.0 (480Mbps) ports into your system
zSupports simultaneous operation of multiple USB 2.0 and USB 1.1 devices
zSupports data transfer rates of high-speed (480Mbps), full-speed (12Mbps), and low-speed (1.5Mbps)
zWorks with a various type of USB devices including hubs, removable drives, digital cameras, scanner, CD-RWs,
PC video cameras, printers, and more…
Note: USB 1.1 devices are limited to USB 1.1 speeds even when they are connected to USB 2.0 host adapter or
USB 2.0 hubs.
Package Contents
z1 x USB 2.0 CardBus Adapter
z1 x User Manual
System Requirements
zWindows 98SE, ME, 2000 and XP 32/64. Vista 32/64, Mac OS 10.2.X, Liinux 2.4.x or later
zAvailable CardBus Type II Slot
Hardware Description
CAUTION:
Use only switching power adapter with following specifications:
Switching power adapter (Optional) DC 5V, 1A
Polarity: Outside negative voltage(-) & Inside positive voltage(+)3.5mm power jack
Hardware Installation
General instructions for installing the card are provided below. Since the design of system may vary, refer to your
system’s reference manual for further information, if needed.
1. Power off your notebook computer.
2. Insert the USB 2.0 CardBus Adapter into the Type II PC Card slot of your notebook computer. Make sure it is
inserted all the way in for a solid connection.

2 Port USB2.0 PCMCIA Card RC601 User Manual
3. Power on your notebook computer.
Driver Installation
For Windows ME, 2000 and XP 32/64. Vista 32/64, Mac OS 10.2.X, Linux 2.4.x or later
Windows® ME,2000, XP, Vista, Mac and Linux will automatically detect and install the correct driver for the USB 2.0
CardBus Adapter.
However, please ensure you have the latest Service Pack Installed.
For Windows® XP
Windows® XP Service Pack 1 or later
For Windows® 2000
Windows® 2000 Service Pack 4 or later
For Windows 98SE
Please download the latest driver from Rosewill website.
After download the driver, unzip the folder first.
Windows 98Se will automatically detect the folder and install the correct driver for RC-601.
To Verify Driver Installation
zRight click My Computer, then click Manage. Click Device Manager.
zDouble click Universal Serial Bus controllers option.
- NEC PCI to USB Open Host Controller
- Standard Enhanced PCI to USB Host Controller
- USB Root Hub(USB 2.0 Root Hub in Windows® 2000)
- USB Root Hub
Thank you for purchasing a quality Rosewill Product.
Please register your product at : www.rosewill.com for complete warranty information and future support for your product.