Roshults Module Gas Grill X User manual

MODULE GAS GRILL X
EN
User Manual
21.01.13 5.1.4-R-UM-M-BBQ-G-X

3 / 16
21.01.13 5.1.4-R-UM-M-BBQ-G-X
EN
Module Gas Grill XPRODUCT SHEET
20.09.01 5.1.4-R-UM-M-BBQ-G-X
EN Module Gas Grill X PRODUCT SHEET
150
250
500
31
500 70
902
105
Module Gas Grill X
Module Gas Grill X
Design:
Broberg & Ridderstråle
Art no:
200360 / 200361 EU market
Colours:
Anthracite / Brushed Stainless Steel
Materials:
Stainless Steel
Measurements:
L 500 D 570 H 431 mm / L 19.7 D 22.4 H 17 in
Weight:
38 kg / 84 lb
Gas Category:
28 - 30 mbar, 50 mbar, 37 mbar, 20 mbar NG
Marketing label
CE
Color & Sample
Frame available in
Anthracite. Akzo Nobel
Röshults Sample: CO004
Brushed Stainless Steel. 316L
Röshults Sample: ME003
Warranty
2 years limited warranty on all products.

4 / 16
21.01.13 5.1.4-R-UM-M-BBQ-G-X
EN Module Gas Grill X USER MANUAL
Module Gas Grill X
Parts
NO DESCRIPTION Q’TY
01 Lid 1
02 Lid base 1
03 Grill grate 1
04 Fireproof plate 1
05 Drip tray 1
06 Knob 1
07 Igniter 1
08 Feet support 1
09 Decorative plate 1
10 Injector 1
11 Nozzle console 1
NO DESCRIPTION Q’TY
12 Mosquito protection (some markets) 1
13 Nozzle 1
14 Burner 2
15 Thermocouple 1
16 Ignition needle 1
17 Corrugated hose 7/16" 2
18 Corrugated hose 5/8" 1
19 Gas connection angle G1/4 - 5/8-18 UNF 1
20 Gas connection G1/4 - 5/8-18 UNF 1
21 Gas valve 1
01
04
08
02
03
09
10
11
17
13
14
20
21
12
15
18
19
16
05
06
07

5 / 16
21.01.13 5.1.4-R-UM-M-BBQ-G-X
EN
Module Gas Grill X
USER MANUAL
Safety instructions
Please save this instruction manual for future reference. This
barbecue grill is designed only for outdoor use. Don’t allow young
children to operate this grill.
For your safety, please note:
• Use outdoors only.
• Read the instructions before using the appliance.
Before the rst use
• Accessible parts may be very hot. Keep young children away. Use
protective glove when handling particularly hot components.
• This appliance must be kept away from ammable materials
during use.
• Do not move the appliance during use.
• Turn off the gas supply at the gas cylinder after use.
• Do not modify the appliance.
• Don’t place the gas cylinder under or near the appliance.
• The pressure regulator shall meet the European standard EN16129.
• The length of the hose shall not exceed 1.5m.
• The gas cylinder must be stored in accordance with the
regulations in force.
• Only use propane and butane gas specied in the instruction
manual.
• Do not use ammable liquids to light or relight your barbecue.
• Please follow the assembly instructions in this manual. Do not
modify the assembly, or change any component parts. Failure to
comply with these instructions may cause risk during use.
• In the event of a gas leak, immediately shut off the gas supply
at the cylinder, extinguish any open ame and open the lid.
Check the hoses for damage and /or poor connection. If the leak
continues, immediately contract as approved gas dealer. Do not
use a naked ame to check for gas leaks.
• Do not attempt to disconnect any gas ttings or connectors
when the appliance is being used.
• Never leave your BBQ unattended when in use. Always cook with
great care.
• This appliance should be cleaned on a regular basis. During
cleaning, take care not to damage any component
parts, such as the burner or valves.
• Check the exible hoses at least once per month, and each time
you change the gas cylinder. If you nd signs of cracking or
deterioration, replace with a new hose of similar length and
quality.
• We recommend that this appliance is serviced by an approved
technician at least once per year. Do not attempt to
service this appliance yourself.
• During the operation, the appliance shall be placed in a
ventilation area.
• Flexible tube shall be changed every 2 years. It is necessary to
change the exible tube when the national conditions
require it.
• The user shall not manipulate any parts that are sealed by
manufacturer or his agent.
This appliance complies and is tested in accordance with Regulation
(EU) 2016/426 - appliances burning gaseous fuels and en 498:2012
Safety practices to avoid personal injury
Keep the ventilation opening(s) of the cylinder enclosure free and
clear from debris.
When properly cared for, your Röshults Grill will give safe, reliable
service for many years. However, extreme care must be used since
the grill produces intense heat and that can increase accident
potential. When using this appliance, basic safety practices must be
followed, including the following:
• Read this Care and User Manual carefully and completely before
using your grill to reduce the risk of re, burn hazard or other
injury.
• Do not repair or replace any part of the grill unless specically
recommended in this manual. All other service should be
referred to a qualied technician.
• Children should not be left alone or unattended in an area
where the grill is being used. Never allow them to sit, stand or
play on or around the grill at any time.
• Do not store items of interest to children around or below the
grill or in the sideboard. Never allow children to crawl inside of
the grill or sideboard.
• Never let clothing, pot holders or other ammable materials
come in contact with or get too close to any grate, burner or
hot surface until it has cooled. Fabric may ignite and result in
personal injury.
• For personal safety, wear proper apparel. Loose tting garments
or sleeves should never be worn while using this appliance.
Some synthetic fabrics are highly ammable and should not be
worn while cooking.
• Only certain types of glass, heat-proof glass ceramic,
earthenware, or other glazed utensils are suitable for grill use.
Theses types of materials may break with sudden temperature

6 / 16
21.01.13 5.1.4-R-UM-M-BBQ-G-X
EN Module Gas Grill X USER MANUAL
changes. Use only on low or medium heat settings according to
the manufacturer’s directions.
• Do not heat unopened food containers as a build-up of pressure
may cause the container to burst.
• Use a covered hand when opening the grill lid. Never lean over an
open grill.
• When lighting the burner, always pay close attention to what
you are doing. Be certain you are turning the igniter labeled for
the burner you intend on using.
• Do not operate burners on high with lid closed.
Before you start the gas grill
Before you use the grill for the rst time, the drip tray should be lled
with a 10 mm thick layer of grease-absorbing, non-combustible
material, for example ne-grained sand. This material is used to soak
up the grease and oils that could cause the grease/oil to ignite. A
useful tip is to place aluminum foil in the drip tray to make handling
the sand (or other material) easier. We recommend that you wash the
grill grates before using them for the rst time.
List of conversion kits:
NO DESCRIPTION Q’TY
01 Burner Injector Size Nozzle ф0.96 2 (Assembled on BBQ)
02 Burner Injector Size Nozzle ф0.88 2
03 Burner Injector Size Nozzle ф0.91 2
04 Burner Injector Size Nozzle ф1.52 2
05 Gas connection copling SE 1 (Assembled on BBQ)
06 Gas connection copling DE 1
07 Gas connection copling UK 1
08 Gas connection copling FR 1
Each conversion kit shall be accompanied by clear, concise printed
instructions and diagrams. Terms should be stated clearly and
understandable, adequate for the proper eld assembly, installation,
service, and safe use of the conversion kit.
Warning!
Fire, explosion, and carbon-monoxide hazard. If the information
in these instructions is not followed exactly, a re, explosion,
or production of carbon monoxide may result causing property
damage, personal injury, or loss of life.
This conversion kit shall be installed by a qualied service agency in
accordance with the manufacturer’s instructions and all applicable
codes and requirements of the authority having jurisdiction. If
the information in these instructions is not followed exactly, a re,
explosion or production of carbon monoxide may result causing
property damage, personal injury or loss of life. The qualied service
agency is responsible for the proper installation of this kit. The
installation is not proper and complete until the operation of the
converted appliance is checked as specied in the manufacturer’s
instructions supplied with the kit.
DETAIL A
SCALE 2:3
A
THISDRAWINGISRÖSHULTSPROPERTYANDITISPROTECTEDBYDOMESTICANDINTERNATIONALLAW.
ITMAYNOTBEUSEDORDISTRIBUTEDWITHOUTRÖSHULTSPERMISSION.
DATE
2019-01-28
ARTHUR
RF
VIEW PLACEMENT EST. WEIGHT
N/A
TITLE
Module BBQ Gas Ver II
0,5 - 6
>6 - 30
>30 - 120
>120 - 400
>400 - 1000
>1000 - 2000
>2000 - 4000
>4000 - 8000
0,1
0,2
0,3
0,5
0,8
1,2
2
3
DRAWING NUMBER
Change Nozzle II
PAGE
1:3
SCALE
11
of
FORMAT
A3
REVISION
A
Nom.Nom. Tol.
 Tol. 
Tolerance where not spec:
SS-ISO 2768-1m / SMS 723 AA
REV DESCRIPTION KM DATE
A 2018-08-20
4
3
2
DETAIL A
SCALE 2:3
A
THISDRAWINGISRÖSHULTSPROPERTYANDITISPROTECTEDBYDOMESTICANDINTERNATIONALLAW.
ITMAYNOTBEUSEDORDISTRIBUTEDWITHOUTRÖSHULTSPERMISSION.
DATE
2019-01-28
ARTHUR
RF
VIEW PLACEMENT EST. WEIGHT
N/A
TITLE
Module BBQ Gas Ver II
0,5 - 6
>6 - 30
>30 - 120
>120 - 400
>400 - 1000
>1000 - 2000
>2000 - 4000
>4000 - 8000
0,1
0,2
0,3
0,5
0,8
1,2
2
3
DRAWING NUMBER
Change Nozzle II
PAGE
1:3
SCALE
11
of
FORMAT
A3
REVISION
A
Nom.Nom. Tol.
 Tol. 
Tolerance where not spec:
SS-ISO 2768-1m / SMS 723 AA
REV DESCRIPTION KM DATE
A 2018-08-20
DETAIL A
SCALE 2:3
A
THISDRAWINGISRÖSHULTSPROPERTYANDITISPROTECTEDBYDOMESTICANDINTERNATIONALLAW.
ITMAYNOTBEUSEDORDISTRIBUTEDWITHOUTRÖSHULTSPERMISSION.
DATE
2019-01-28
ARTHUR
RF
VIEW PLACEMENT EST. WEIGHT
N/A
TITLE
Module BBQ Gas Ver II
0,5 - 6
>6 - 30
>30 - 120
>120 - 400
>400 - 1000
>1000 - 2000
>2000 - 4000
>4000 - 8000
0,1
0,2
0,3
0,5
0,8
1,2
2
3
DRAWING NUMBER
Change Nozzle II
PAGE
1:3
SCALE
11
of
FORMAT
A3
REVISION
A
Nom.Nom. Tol.
 Tol. 
Tolerance where not spec:
SS-ISO 2768-1m / SMS 723 AA
REV DESCRIPTION KM DATE
A 2018-08-20
THISDRAWINGISRÖSHULTSPROPERTYANDITISPROTECTEDBYDOMESTICANDINTERNATIONALLAW.
ITMAYNOTBEUSEDORDISTRIBUTEDWITHOUTRÖSHULTSPERMISSION.
DATE
2019-01-28
ARTHUR
RF
VIEW PLACEMENT EST. WEIGHT
N/A
TITLE
0,5 - 6
>6 - 30
>30 - 120
>120 - 400
>400 - 1000
>1000 - 2000
>2000 - 4000
>4000 - 8000
0,1
0,2
0,3
0,5
0,8
1,2
2
3
DRAWING NUMBER
Change Nozzle
PAGE
1:1
SCALE
11 of
FORMAT
A3
REVISION
A
Nom.Nom. Tol.
 Tol. 
Tolerance where not spec:
SS-ISO 2768-1m / SMS 723 AA
REV DESCRIPTION KM DATE
A 2018-08-20
07
08
06
1
Changing nozzle and gas coupling
1. Open lid and remove cooking grills and reproof plate. Set aside
for later use
2. Change Nozzle according to technical data specication sheet
above and instruction in the following pictures.
3. Select and connect the gas connection suitable for your country
regulation.
4. Attach the screws again.
LEAK TESTING
General
Although all gas connections on the grill are leak tested at the
factory prior to shipment, a complete gas tightness check must be
performed at the installation site due to possible mishandling in
shipment, or excessive pressure unknowingly being applied to the
unit.
Periodically check the whole system for leaks following the
procedures listed below. If the smell of gas is detected at anytime
you should immediately check the entire system for leaks.
Make sure that all packing material is removed from the grill including
the burner tie-down straps. All burners in your new Röshults grill have
been re tested at the factory. You may notice a slight discoloration
due to the factory re testing.

7 / 16
21.01.13 5.1.4-R-UM-M-BBQ-G-X
EN
Module Gas Grill X
USER MANUAL
1
2
3
4
56
7
Do not smoke while leak testing. Never leak test with an open ame.
Make a soap solution of one part liquid detergent and one part water.
You will need a spray bottle, brush, or rag to apply the solution to the
ttings. For the initial leak test, make sure the L.P. cylinder is full.
To test
Make sure all control valves are in the “OFF” position. Turn the gas
supply on. Check all connections from the L.P. cylinder up to and
including the connection to the manifold pipe assembly (the pipe that
goes to the burners).
Apply a soapy water mixture to the following (see numbers 1-7):
1. Cylinder.
2. The inlet end of the corrugated pipe is connected to the gas valve,
and the other end is connected with L type connector.
3. Gas valve.
4. The corrugated pipe outlet is connected gas valve.
5. The corrugated pipe outlet are aligned to the burner hole.
6. L type connector.
7. The reducing valve is connected to L type connector and other
end is connected the gas cylinder (clockwise).
Soap bubbles will appear where a leak is present. If a leak is present,
immediately turn off the gas supply, tighten any leaking ttings, turn
gas on, and recheck.
Should the gas continue to leak from any or all of the ttings, turn off
the gas supply, and contact our customer service at
[phone].
Only those parts recommended by the manufacturer should be used
on the grill. Substitution will void the warranty. Do not use the grill
until all connections have been checked and do not leak.
Gas ow check:
Each grill burner is tested and adjusted at the factory prior to
shipment; however, variations in the local gas supply may make it
necessary to adjust the burners. The ames of the burners should be
visually checked.
Flames should be blue and stable with no yellow tips, excessive
noise or lifting. If any of these conditions exist, check to see if the
Secure that your gas grill is adapted for the intended use of gas and gas connection as specied in the technical data below:
Module Gas Grill X
Manufacturer
name address
Röshults Svenska Hantverk AB
Kärrviolsvägen 7, 554 75 Jönköping, Sweden
Gas Category I3 + (28-30/37) I3B/P(30) I3B/P(50) I3B/P(37) I2H I2E
Gas and
Supply
Pressure
G30 Butane at
28~30 mbar
G31 Propane at
37 mbar
G30 Butane and G31 Propane at
30mbar
G30 Butane and
G31 Propane at
50mbar
G30 Butane and
G31 Propane at
37mbar
Methane G20
20mbar
Methane G20
20mbar
Country Code BE, CH, CY, CZ,
ES, FR, GB, GR,
IE, IT, LT, LU, LV,
PT, SK, SI
BE, CY, DK, EE, FR, GB, HU, IT, LT,
NL, NO, SE, SI, SK, RO, HR, TR, BG,
IS, LU, MT, FI
AT, CH, DE, SK PL AT, CH, CZ, DK,
EE, ES, FI, FR,
GB, GR, HU, IE,
IT, LT, LV, NL,
NO, PT, RO, SE,
SI, SK
DE, LU, PL, RO
Burner 2 2 2 2 2 2
Nominal Heat
Input (single
burner)
4kW 4kW 4kW 4kW 4kW 4kW
Burner
Injector Size
0.96mm 0.96mm 0.88mm 0.91mm 1.52mm 1.52mm
Total Heat Input 8kW (G30:582g/h;G31:572g/h) (G20:0.76m3/h)
Service center Röshults Svenska Hantverk AB

8 / 16
21.01.13 5.1.4-R-UM-M-BBQ-G-X
EN Module Gas Grill X USER MANUAL
air shutter or burner ports are blocked by dirt, debris, spider webs,
etc. If you have any questions regarding ame stability, please call
customer service [phone].
Preparation
You need a gas cylinder(s) and a proper regulator(s) to reach the
gas pressure to operate this gas grill. Regulator should comply with
current version and national regulation.
Installation
After purchasing your gas cylinder you will then be ready to set it
up with your gas grill. The recommended weight of the cylinders
are 11kg. Check all the parts, and make sure no part is missing.
If there are any parts missing, please contact customer service.
The distance between the appliance and the wall is as follows for
reference.
60
60
60
(cm)
Operations
1. When changing the gas cylinder which shall be carried out away
from any source of ignition. Position the gas cylinder at any side
of your gas grill, should not be placed inside grill, keeping in mind
that the gas cylinder must be kept away from heat and in a safe
position.
2. Identify which type of regulator you need and follow the
instructions provided by the gas tube supplier. Also follow the
regulations valid for your country.
3. When ready to use your gas grill insert the regulator into the gas
cylinder valve and tighten rmly.
Warning!
Before attempting to light your gas grill you must refer to your lighting
instructions and warning / safety precautions.
Check the hose before each use, searching for cracking, cuts or
any abrasions. If the hose is found to be faulty in any way do not
attempt to use your gas grill. When changing your gas cylinder
ensures that there are no sources of ignition close by res, cigarettes,
naked ames etc. Make sure that the appliance is switched off. The
appliance only can use liquid gas cylinder as per Technical Data
Label. The gas cylinder should meet the national requirement.
Safety precautions
• Always test gas line for leaks at connector with soapy water after
making connections.
• The top lid must always be open when lighting the burner.
• Use oven gloves and sturdy long handled gas grill tools when
cooking on the grill.
• Be prepared if an accident or re should occur. Know where the
rst aid kit and re extinguishers are and know how to use them.
• Keep any electrical supply cord and the fuel supply hose away
from any heated surfaces.
• Always cook with great care.
• Do not heat any unopened glass or metal container of food on
the grill. Pressure may build up and cause the container to burst,
possibly resulting in serious personal injury or damage to the
grill. It is recommended to use protective gloves when operating
the appliance, especially handling particularly hot components.
Igniting the Grill
Burner: Each gas consumption (per hour) of the BBQ Grill Gas
Module X with all burners on “HIGH”:
Main Burner 4KW
Total 8KW
Prior to lighting the burners, all checks and procedures detailed in the
chapter ‘Before the rst use’ must have been carried out.
• The lid of the appliance must always be open when you light the
burner(s).
• Do not bend directly over the appliance when lighting the
burner(s).
• The control knobs of the appliance must be ‘OFF’. Slowly open
the gas cylinder valve. Before opening the control knob of one
burner, wait approx. 10 seconds to allow to gas to stabilize.
• As soon as one burner has been lighted, you only need to put the
control knob of the other burner(s) in the position to light them.
• Never try to light all burners at once.
Lightning procedure
1. Open lid during lighting
2. Push and turn the control knob to “HIGH” and hold for 3-5 sec.
3. If ignition does NOT occur in 5 seconds, turn control knob to
“OFF”, wait 5 minutes and repeat lighting procedure.

9 / 16
21.01.13 5.1.4-R-UM-M-BBQ-G-X
EN
Module Gas Grill X
USER MANUAL
Lighting using match light extension rod
If the burner will not light after several attempts then the burner can
be match lit.
Extension rod is placed in the driptray in the front of the BBQ:
1. Keep lid open through whole process.
2. Turn OFF all burner valves.
3. Place a lighted match between the coils on the extension rod and
hold next to the burner.
4. Turn the control knob to the “HIGH” position and press knob.
Burner should light immediately.
5. If the burner does not light in 4 seconds turn the knob off, wait 5
minutes with lid open and repeat above procedures.
THISDRAWINGISRÖSHULTSPROPERTYANDITISPROTECTEDBYDOMESTICANDINTERNATIONALLAW.
ITMAYNOTBEUSEDORDISTRIBUTEDWITHOUTRÖSHULTSPERMISSION.
DATE
2019-02-01
ARTHUR
RF
VIEW PLACEMENT EST. WEIGHT
N/A
TITLE
Module BBQ Gas Ver II
0,5 - 6
>6 - 30
>30 - 120
>120 - 400
>400 - 1000
>1000 - 2000
>2000 - 4000
>4000 - 8000
0,1
0,2
0,3
0,5
0,8
1,2
2
3
DRAWING NUMBER
Manual Lightning
PAGE
1:4
SCALE
11 of
FORMAT
A3
REVISION
A
Nom.Nom. Tol.
 Tol. 
Tolerance where not spec:
SS-ISO 2768-1m / SMS 723 AA
REV DESCRIPTION KM DATE
A 2018-08-20
THISDRAWINGISRÖSHULTSPROPERTYANDITISPROTECTEDBYDOMESTICANDINTERNATIONALLAW.
ITMAYNOTBEUSEDORDISTRIBUTEDWITHOUTRÖSHULTSPERMISSION.
DATE
2019-02-01
ARTHUR
RF
VIEW PLACEMENT EST. WEIGHT
N/A
TITLE
Module BBQ Gas Ver II
0,5 - 6
>6 - 30
>30 - 120
>120 - 400
>400 - 1000
>1000 - 2000
>2000 - 4000
>4000 - 8000
0,1
0,2
0,3
0,5
0,8
1,2
2
3
DRAWING NUMBER
Manual Lightning
PAGE
1:4
SCALE
11
of
FORMAT
A3
REVISION
A
Nom.Nom. Tol.
 Tol. 
Tolerance where not spec:
SS-ISO 2768-1m / SMS 723 AA
REV DESCRIPTION KM DATE
A 2018-08-20
Lighting Rod
Match
Danger!
Keep your face and hands as far away from the grill as possible when
lighting it.
Flame Characteristics
This procedure outlines how to check for the proper burner ame
characteristics. Check for proper burner ame characteristics. Each
burner is adjusted prior to shipment; however, variations in the local
gas supply may take minor adjustments necessary.
Burner ames should be blue and stable with no yellow tips,
excessive noise, or lifting. If any of these conditions exist call our
customer service line. If the ame is yellow, it indicates insucient
air. If the ame is noisy and tends to lift away from the burner, it
indicates too much air.
Visually check the burner ames prior to each use. The ame should
look like this picture. If they do not, refer to the burner maintenance
part of this manual.
Natural Gas Change Connected Instructions
Each conversion kit shall be accompanied by clear, concise printed
instructions and diagrams, stated in terms clearly understandable,
adequate for the proper eld assembly, installation, service, and safe
use of the conversion kit.
Warning!
Fire, Explosion, and Carbon-Monoxide Hazard
If the information in these instructions is not followed exactly,
a re, explosion, or production of carbon monoxide may result
causing property damage, personal injury, or loss of life.
This conversion kit shall be installed by a qualied service agency in
accordance with the manufacturer’s instructions and all applicable
codes and requirements of the authority having jurisdiction. If
the information in these instructions is not followed exactly, a re,
explosion or production of carbon monoxide may result causing
property damage, personal injury or loss of life. The qualied service
agency is responsible for the proper installation of this kit. The
installation is not proper and complete until the operation of the
converted appliance is checked as specied in the manufacturer’s
instructions supplied with the kit.
Please stick the conversion label after change to Natural gas, that
have ready in conversion kit. The position is nearby main label.
Please re-do the leak testing and try to light the grill after change to
Natural gas immediately.
Natural Gas Conversion kit consists of a ф1.52mm nozzle, and a
conversion label.
Natural gas hose
Natural gas supply
from home
NO DESCRIPTION Q’TY
01 ф1.52 mm Nozzle 2
Nozzle base
1.52 mm Nozzle
Nozzle
1.52 mm Nozzle
1. Open lid and remove cooking grills and reproof plate.
Set aside for later use.
2. Use the ф1.52 mm NG Nozzle to change it. Lock back the nozzle
into burner with screws and check that the nozzle is aligned with
the burner.

10 / 16
21.01.13 5.1.4-R-UM-M-BBQ-G-X
EN Module Gas Grill X USER MANUAL
THE INSTALLATION OF THE APPLIANCE
MUST BE ACCORDING TO THE NATIONAL LAW.
Care & Maintenance
Storage
Your gas cylinder must be stored outdoors in a well ventilated area
and must be disconnected from your gas grill when not in use.
Ensure that you are outdoors and away from any sources of ignition
before attempting to disconnect your gas cylinder from your gas grill.
When you are using your gas grill after a period of storage, please
ensure to check for gas leaks and check for any obstructions in the
burner etc. before using. Always follow the cleaning instructions to
ensure gas grill is safe. If gas grill is stored outdoors ensure to check
that all areas under the front panel are free from any obstructions
(dirt, insects etc.) as this may affect the ow of gas.
• Store your barbecue in a cool dry place. It may be necessary to
dry the barbecue and the inside of the cover if used.
• Clean the grill grate by using a brush or ruff sponge, soap and
luck warm water. Wrap the burners in aluminum foil to help
prevent insects or other debris from obstructing the burners.
Maintenance
• Maintenance is recommended every 90 days for your gas grill,
but it is absolutely necessary to perform maintenance at least
once a year. By doing so, you will extend the life of your gas grill.
Your gas grill is easy to clean with minimum effort, just follow
these helpful hints for cleaning convenience.
Stainless steel
• The grill is made from stainless steel. Some parts of the frame,
depending on the model, can be powder coated on top of
stainless steel material.
• The easiest way to keep your BBQ in a good condition we
recommend cleaning the grill after each use.
• Use lukewarm water, soap and a sponge. Always scrub in the
direction of the grain.
Outside/frame of the grill
• Wipe down the outside of the grill to ensure that there is no
residual marinade or fat/grease that could corrode the surface.
Use soap and water to remove any stubborn residues.
• For cleaning powder coated surface, use a cloth or a soft
sponge.
Regular Checks & Maintenance
Gas cylinder
• Ask your local dealer/retailer to check the gas cylinder each time
you change it or ll it with gas.
Hose and regulator
• Rubber has a limited useful life and becomes worn over time.
If there is any damage or cracks, replace the hose immediately.
• Check the rubber gasket on the connection that is screwed into
the gas cylinder to ensure that it is not cracked or dried out.
Burners
• Turn the knob to maximum and burn off any fat and grease for
ve minutes after cooking.
• Clean the burners as described above after each barbecue -
residual marinades and fat/grease can cause damage to the
metal parts of the grill.
• The burner holes can be cleaned with a pipe cleaner or similar.
Stainless grill grates
• The easiest way to clean the grill is immediately after cooking
is completed and after turning off the ame. Wear a barbeque
mitt to protect your hand from the heat and steam. Dip a brass
bristle barbeque brush in tap water and scrub the hot grill. Dip the
brush frequently in the bowl of water. Steam, created as water
contacts the hot grill, assists the cleaning process by softening
any food particles. The food particles will fall and burn. If the grill
is allowed to cool before cleaning, cleaning will be more dicult.
• It is also possible to keep the grill grates clean by turning the
burner knob to maximum and burning off fat and grease for ve
minutes after cooking. Use a grill grate brush or similar to remove
any particularly stubborn dirt.
• Please note! Do not use solvents!
Grill part
• Use a plastic or wooden scraper to scrape away grease/fat from
the inside of the grill. Soapy water and a sponge is recommended
for more thorough cleaning. It is important to ensure that the
regulator and valves do not become wet.
• It is important to keep the inside of the grill clean - otherwise
there is a risk that residual fat and grease will ignite.
Drip tray
• Check the sand in the drip tray regularly to ensure that it is dry
and clean. Change the sand as required (use ne-grain sand or
cat litter box sand)

11 / 16
21.01.13 5.1.4-R-UM-M-BBQ-G-X
EN
Module Gas Grill X
USER MANUAL
Changing the battery
The barbecue is equipped with electrical ignition and is powered with
an AA battery. After a while, the battery needs to be changed. The
battery holder is placed on in the front on the left side under the grill.
You change the battery by twisting the lower section of the battery
holder counter-clockwise. Remove the old battery and replace it with
a new one. Remount the battery holder and check that it works.
Troubleshooting
Spider and insect warning!
Spiders and insects can nest in the burners of this or any other grill,
and cause the gas to ow from the front of the burner. This is a very
dangerous condition which can cause a re to occur behind the valve
panel, thereby damaging the grill and making it unsafe to operate.
When to look for spiders
You should inspect the burners at least once a year or immediately
after any of the following conditions occur:
• The smell of gas in conjunction with the burner ames appearing
yellow.
• The grill does not reach temperature.
• The grill heats unevenly.
• The burners make popping noises.
Before calling for service
If the grill does not function properly, use the following checklist
before contacting your dealer for service.
FAQ
Q: What is the function of the plates that rest above the burners?
A: These plates, or ame fenders as they are also known, provide
protection against ames that are up towards the food on the grill
grates. The plates signicantly increase the useful life of the burners
by protecting them against oil, fat, grease and juices from the food.
The plates also provide a very even distribution of heat at the grill
grates.
Q: How long do I need to wait before I can start
cooking food on the grill?
A: It normally takes 5-10 minutes for the grill to reach the right
temperature.
Q. Can I use lava stones in the grill?
A: No, lava stones should not be used with Röshults’ grills.
Problems Solutions
Grill won’t light when the
control knob is rotated.
Burner ame is yellow or
orange, in conjunction
with the odor of gas.
Low heat with knob in
“HIGH” Position.
• Check to see if LP tank is
empty.
• Clean wire(s) and/or
electrode by rubbing with
alcohol and clean swab.
• Wipe with dry cloth.
• Make sure the wire is
connected to electrode
assembly.
• Do other burners on the unit
operate?
• Check to see if other burners
operate. If so, check the gas
orice on the malfunctioning
burner for an obstruction.
• Call our customer service
line [phone]..
• Is the fuel hose bent or
kinked?
• Is the grill in a dusty area?
• Is there adequate gas supply
available?
• If it is only one burner that
appears low, does the orice
or burner need cleaning?
• Is the gas supply, or gas
pressure low?
• Is the grill being preheated
for 15 minutes?

12 / 16
21.01.13 5.1.4-R-UM-M-BBQ-G-X
EN Module Gas Grill X USER MANUAL
12 / 16
Warranty
Model: Module Gas Grill X
Stainless Steel Outdoor Gas Grill
Röshults warrants to the original consumer purchaser of each
Outdoor Gas Grill that when subject to normal residential use, it is
free from defects in workmanship and materials for the periods
specied below. This warranty excludes grills used in rental or
commercial applications. There will be a shipping and handling
charge for the delivery of the warranty part(s).
COMPONENT WARRANTY PERIOD
Burners 5 years
Stainless Steel Flame Tamer 3 years
Stainless Steel Cooking Grids 3 years
Valves 1 year
Frame, Housing, Cart, Control Panel,
Igniter, and Related Parts 1 year
All Stainless Steel Parts 3 years
Our obligation under this warranty is limited to repair or replacement,
at our option, of the product during the warranty period. The extent
of any liability of Röshults under this warranty is limited to repair or
replacement.
This warranty does not cover normal wear of parts, damage resulting
from any of the following:
• Negligent use or misuse of the product.
• Use on improper fuel/gas supply.
• Use contrary to operating instructions.
• Alteration by any person other than our factory service center.
The warranty period is not extended by such repair or replacement.
Warranty claim procedure
If you require service or parts for your grill, please contact our
Warranty Service Center for factory direct assistance. Our hours of
operation are 8 AM to 5 PM CET.
Our phone number: [phone]
Our email: [e-mail]
Please direct all correspondence to your local dealer.
Product repair as provided under this warranty is your exclusive
remedy. Röshults shall not be liable for any incidental or
consequential damages for breach of any express or implied
warranty on its products. Except to the extent prohibited by
applicable law, any implied warranty or merchantability or tness
for a particular purpose on this product to the duration of the above
warranty. Some states do not allow the exclusion or limitation of
incidental or consequential damages, or allow limitations on how
long an implied warranty lasts, so the above limitations or exclusions
may not apply to you. This warranty gives you specic legal rights,
and you may have other rights, which vary from state to state.

ROSHULTS.COM
21.01.13 5.1.4-R-UM-M-BBQ-G-X