ROSIERES RICD36C3D/E1 User manual

PN:16166000A25671
80G双胶纸
20210624
1、印刷颜色：钉装，单黑；
ROSIERES-MC-IT7251J1-AD
（MC-IT7453AJ1-AD）RICD36C3D/E1

Instructions Manual For Induction Hob
ENGLISH
Manuel d'instructions pour plaque à induction
FRANÇAIS
carefully before using the hob and keep it in a safe place for future reference.
Thank you for purchasing the induction hob. Please read this instruction manual
Rosieres
RICD36C3D/E1

EN-2

EN-3

Rosieres
Rosieres
EN-4

59cm 52cm
6.2cm 5.8cm
EN-5

1 3
44
2
5
2
4
3
5
1
EN-6

EN-7

EN-8

B
EN-9

B
EN-10

EN-11

EN-12

it is possible to set a maximum power absorption level for the induction hob, choosing up to different
power ranges.
induction hobs are able to limit themselves automatically in order to work at lower power, to avoid
the risk of overloading.
It is not necessary to put any pots on the heating zones. We suggest to start setting within 5
seconds after connecting the power. You need to enter the power setting mode within 60
seconds to enter Power Management Function.
To enter Power Management Function
1. Please be noted that do not turn on the
hob. At this stage, press “Boost” and “Lock” at the
same time.
The “S” symbol will be displayed on zone #1.
2. Press “Lock” key.
The symbol “S” will be displayed on zone #1 and
symbol “E” will be displayed on zone #2.
3. Press “Boost” and “Lock” keys at the same
time again.
The symbol “S” will be displayed on zone #1, “E”
will be displayed on zone #2, and “t” will be
displayed on zone #3. At the same time, the
current maximum power mode (7.4) will be
displayed on the timer indicator.
Power Management Function
EN-13

To switch to another level
short press the “Boost” key
Confirmation Power Management Function
After the desired power setting mode is selected,
please press “Lock” key
When the timer indicator stops flickering, the power
mode is set successfully.
Exit Power Management Function
After the setting, make sure to dis-connect the
power and connect it again.
Then the hob will be turned off.
EN-14
There are 6 power levels, from “7.4”to “2.5”. The
timer indicator will show one of them.
“7.4”: the maximum power is 7.4Kw.
“6.5”: the maximum power is 6.5Kw.
“5.5”: the maximum power is 5.5Kw.
“4.5”: the maximum power is 4.5Kw.
“3.5”: the maximum power is 3.5Kw.
“2.5”: the maximum power is 2.5Kw.

EN-15

Minimum(mm) Maximum(mm)
EN-16

EN-17

EN-18

EN-19