Rosslare DigiTool GC-02 User manual

GC-02
Installation Instructions DigiTool™ Docking Base Unit
1 0706-0960217+00
1. Introduction
The DigiTool™ GC-02 Base Unit is a docking station and high
speed charger for GC-01 Readers. It is robust, conveniently
compact, and the ideal solution when downloading
information directly from GC-01 Readers to a local computer.
The GC-02 Base Unit can be either wall-mounted or used on a
desktop. It includes a nickel plated steel iButton Reader and
unique swiveling power and serial connectors. The unit is
rugged, dust resistant, and water resistant.
The GC-02 Base Unit is fully integrated into the DigiTool family of
adaptable guard patrol products. The DigiTool system is built to
meet the needs of any guard patrol area and facilitates the
guard touring administration of guards, tours, location tags,
users, and events tags.
2. Technical Specifications
2.1 Electrical Characteristics
Operating Voltage: 9–12V DC
Maximum Input Current: 800mA
2.2 Reader Characteristics
Upload Interface: iButton reader to enroll locations, events,
and user tags in the PC software GS-01 or GS-02
Operating Indicators: 3 color LED and buzzer
Charger: 3 hours for a complete charge
2.3 General Characteristics
Operating Temperature: -20°–60°C (-4°–140°F)
Operating Humidity: 0 to 95% (non-condensing)
Weight: 216g (0.47 lbs)
Dimensions: 100mm x 82mm x 80mm (3.94" x 3.23" x 3.15")
2.4 Communication Characteristics
Connection Type: Serial (RS232)
Connection Speed: 9600 baud (full duplex)
Reader Upload Speed: 300 reads per second
3. Operations
3.1 Connections
Connect the GC-02 Base Unit to the power using the DC
adaptor included with the unit. Attach the adaptor using the
power socket at the back right-hand side of the unit. The unit's
LED lights orange when the unit is connected to a power
source.
Connect the unit to a computer via the RS-232 Female D-9
type socket at the back left-hand side of the unit.
To mount the unit on a wall, swivel the connectors so they are
facing downwards. The mounting holes are at the back of the
unit, covered by two small labels.
3.2 Uploading
To charge a GC-01 Reader or to upload information from the
Reader to the computer, place the Reader in the docking bay
with its reader head down. The unit's LED lights red when a
Reader is charging and green when the Reader is fully
charged. When there is no reader in the docking bay, the LED
lights orange.
In order to ensure the long life of the Reader's battery, do not
remove it from the charger until the LED has turned green.
Use the iButton on the side of the unit for registering event tags,
location tags, and user tags to the computer.
Attach the unit to a GC-50 to connect to a remote computer
over a telephone line. Please refer to the "GC-50 Remote
Station Installation Guide" for more information.
3.3 Operating the Unit
Information uploaded to the computer can be maintained
and manipulated from either the GS-01 DigiTool Reports Lite
software or the GS-02 DigiTool Call Center software system.
Please refer to the "GS-01 DigiTool Report Lite Installation and
Operation Manual" or "GS-02 DigiTool Call Center Installation
and Operation Manual" for more information.
Wall mounting
holes

4. Limited Warranty
ROSSLARE ENTERPRISES LIMITED S (Rosslare) ONE YEAR LIMITED
WARRANTY is applicable worldwide. This warranty supersedes any other
warranty. Rosslare's ONE YEAR LIMITED WARRANTY is subject to the
following conditions:
Warranty
Warranty of Rosslare's products extends to the original purchaser (Customer)
of the Rosslare product and is not transferable.
Products Covered By This Warranty and Duration
ROSSLARE ENTERPRISES LTD. AND / ORSUBSIDIARIES (ROSSLARE)
warrants that the GC-02 DigiTool Base Unit, to be free from defects in
materials and assembly in the course of normal use and service. The warranty
period commences with the date of shipment to the original purchaser and
extends for a period of 1 year (12 Months).
Warranty Remedy Coverage
In the event of a breach of warranty, ROSSLARE will credit Customer with the
price of the Product paid by Customer, provided that the warranty claim is
delivered to ROSSLARE by the Customer during the warranty period in
accordance with the terms of this warranty. Unless otherwise requested by
ROSSLARE ENTERPRISES LTD. AND / OR SUBSIDIARIES representative,
return of the failed product(s) is not immediately required.
If ROSSLARE has not contacted the Customer within a sixty (60) day holding
period following the delivery of the warranty claim, Customer will not be
required to return the failed product(s). All returned Product(s), as may be
requested at ROSSLARE ENTERPRISES LTD. AND /OR SUBSIDIARY’S sole
discretion, shall become the property of ROSSLARE ENTERPRISES LTD.
AND /OR SUBSIDIARIES.
To exercise the warranty, the user must contact Rosslare Enterprises Ltd. to
obtain an RMA number after which, the product must be returned to the
Manufacturer freight prepaid and insured
In the event ROSSLARE chooses to perform a product evaluation within the
sixty (60) day holding period and no defect is found, a minimum US$ 50.00 or
equivalent charge will be applied to each Product for labor required in the
evaluation.
Rosslare will repair or replace, at its discretion, any product that under normal
conditions of use and service proves to be defective in material or
workmanship. No charge will be applied for labor or parts with respect to
defects covered by this warranty, provided that the work is done by Rosslare
or a Rosslare authorized service center.
Exclusions and Limitations
ROSSLARE shall not be responsible or liable for any damage or loss resulting
from the operation or performance of any Product or any systems in which a
Product is incorporated. This warranty shall not extend to any ancillary
equipment not furnished by ROSSLARE, which is attached to or used in
conjunction with a Product, nor to any Product that is used with any ancillary
equipment, which is not furnished by ROSSLARE.
This warranty does not cover expenses incurred in the transportation, freight
cost to the repair center, removal or reinstallation of the product, whether or
not proven defective.
Specifically excluded from this warranty are any failures resulting from
Customer's improper testing, operation, installation, or damage resulting from
use of the Product in other than its normal and customary manner, or any
maintenance, modification, alteration, or adjustment or any type of abuse,
neglect, accident, misuse, improper operation, normal wear, defects or
damage due to lightning or other electrical discharge. This warranty does not
cover repair or replacement where normal use has exhausted the life of a part
or instrument, or any modification or abuse of, or tampering with, the Product if
Product disassembled or repaired in such a manner as to adversely affect
performance or prevent adequate inspection and testing to verify any warranty
claim.
ROSSLARE does not warrant the installation, maintenance, or service of the
Product. Service life of the product is dependent upon the care it receives and
the conditions under which it has to operate.
In no event shall Rosslare be liable for incidental or consequential damages.
Limited Warranty Terms
THIS WARRANTY SETS FORTH THE FULL EXTENT OF ROSSLARE
ENTERPRISES LTD.AND IT’S SUBSIDIARIES’S WARRANTY
THE TERMS OF THIS WARRANTY MAY NOT BE VARIED BY ANY PERSON,
WHETHER OR NOT PURPORTING TO REPRESENT OR ACT ON BEHALF OF
ROSSLARE.
THIS LIMITED WARRANTY IS PROVIDED IN LIEU OF ALL OTHER
WARRANTIES.ALL OTHER WARRANTIES EXPRESSED OR IMPLIED,
INCLUDING WITHOUT LIMITATION,IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,ARE
SPECIFICALLY EXCLUDED.
IN NO EVENT SHALL ROSSLARE BE LIABLE FOR DAMAGES IN EXCESS OF
THE PURCHASE PRICE OF THE PRODUCT,OR FOR ANY OTHER INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES,INCLUDING BUT NOT LIMITED TO
LOSS OF USE,LOSS OF TIME,COMMERCIAL LOSS,INCONVENIENCE,AND
LOSS OF PROFITS,ARISING OUT OF THE INSTALLATION,USE,OR INABILITY
TO USE SUCH PRODUCT,TO THE FULLEST EXTENT THAT ANY SUCH LOSS
OR DAMAGE MAY BE DISCLAIMED BY LAW.
THIS WARRANTY SHALL BECOME NULL AND VOID IN THE EVENT OF A
VIOLATION OF THE PROVISIONS OF THIS LIMITED WARRANTY.
5. Contact information
Asia Pacific, Middle East, Africa
Headquarters:
905-912 Wing Fat Industrial Bldg, 12 Wang Tai Road, Kowloon Bay HK
Tel:[phone] Fax: [phone]
E-mail: [email protected]
United States and Canada
1600 Hart Court, Suite 103 Southlake, TX, USA 76092
Toll Free:[phone] Local:[phone] Fax: [phone]
E-mail: [email protected]
Europe
Global Technical Support & Training Center:
HaMelecha 22 Rosh HaAyin, Israel 48091
Tel: [phone] Fax: [phone]
E-mail: [email protected]
South America
Pringles 868, 1640 Martinez Buenos Aires Argentina
Tel: [phone] Fax: [phone]
E-mail: [email protected]
Web Site: www.rosslaresecurity.com
2 0706-0960217+00