Rosslare PS-14 User manual

PS-14
POWER SUPPLY
INSTALLATION INSTRUCTIONS
INTRODUCTION and KEY FEATURES
The PS-14 is a power supply that serves as a spare part for the AC-
215; it replaces the existing power supply and provides power to
the AC-215 board, readers, and electric locks, as well as battery
charging for power backup.
The PS-14 does not require programming. It comes with a battery
charger (up to 7Ah), Tamper Output, and two separated power
supplies.
The PS-14 power supply converts a 16VAC input from the voltage
transformer to a 12 VDC power limited output (see specification)
with an integrated battery charger.
INSTALLATION PROCEDURE
The power supply should be installed in accordance with article
760 of the National Electrical Code NFPA 70, as well as applicable
Local Codes.
Note: Circuit breaker must be close to the power supply and must be
accessible.
1. Mount the Power Supply.
2. Connect AC power (16VAC) to the PS-14 power supply
input. The power supply output rated 12VDC and a
maximum of 0.5A.
3. Connect the grounding to the ground terminal.
Make sure to secure the screw tightly.
4. Connect the ACU power input to the power terminal
marked [12VDC (+) and 0.5A (-)].
5. Backup battery is optional. When battery is not used, loss of
AC results in the loss of output voltage. When using a
backup battery, it must be a UL certified "lead acid" or "gel"
type. Connect the battery terminal to power terminal
marked [VBAT(+) and 12VDC (-)].
(Battery leads are included.)
WIRING
Use 18 AWG or larger for all power connections.
Ensure that the power-limited circuit is wired separately from the
non-power limited wiring (16 VAC, Battery).
MAINTENANCE
For proper operation, the unit should be tested at least once a
year as described below:
Output voltage test:
Check DC output for proper voltage level under normal load
conditions.
Battery test:
Check specified voltage, at both battery terminal and board
terminals marked [VBAT(+) (-)] under normal load conditions,
verify that the battery is fully charged, and ensure that there is no
break in the battery connection wires.
Note: Maximum charging current under discharge is 1.2A.
Note: Battery life expectancy is five years .However, it is recommended to
change batteries after four years, or before, if required.
Dispose of used batteries according to manufacturer's instructions.
POWER SUPPLY SPECIFICATIONS
Input Voltage
16V AC / 2.5A
Backup Battery Charger
12VDC lead acid battery up to 7Ah
Output Voltage 1
12V DC / 0.5A
Output Voltage 2
12V DC / 1.5A
ELECTRICAL SPECIFICATIONS
Battery Backup
Built in charger for sealed, UL certified 12VDC lead acid battery
up to 7Ah
Caution: Risk of explosion, when battery is replaced by a wrong battery type.
Visual Indicators
DC output red LED2 indicator – low voltage
AC input green LED1 indicator – main power
BAT charger red LED3 indicator – backup battery low voltage
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature:
32°F to 120°F (0°C to 49°C)
Operating Humidity:
0 to 90% (Non-Condensing)
MECHANICAL SPECIFICATIONS
Dimensions:
Height: 110 mm
Width: 65 mm
Depth: 83 mm
Transformer
AC Transformer - 120/220V AC/16V AC 2.5A (40VA) Class 2 (not
included with PS-14)
Tamper Output (open collector) – indicates faulty power
WIRING DIAGRAM
The following table describes the terminal blocks in the wiring
diagram:
Terminal Block Description
VIN 16VAC Connects to a transformer that
converts 220VAC to 16VAC.
VBAT 12VDC Connects to a 12V battery. The
battery is recharged from this card,
and is used as backup if the 16VAC
is not operating.
TAMPER (-) Open collector tamper out
indication.
12VDC 1.5A Power supply output, rated 12VDC
and a maximum of 1.5A.
12VDC 0.5A Power supply output, rated 12VDC
and a maximum of 0.5A.

TECHNICAL SUPPORT
Asia Pacific, Middle East and Africa
Rosslare Security Products Headquarters
905-912 Wing Fat Industrial Bldg,
12 Wang Tai Road,
Kowloon Bay Hong Kong
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]
United States and Canada
1600 Hart Court,
Suite 103 Southlake,
TX, USA 76092
Toll Free: [phone]
Local: [phone]
Fax: [phone]
E-mail: [email protected]
Europe
Global Technical Support & Training Center
HaMelecha 22,
Rosh HaAyin, Israel 48091
Tel: [phone]
Fax: [phone]
E-mail: [email protected]
South America
Pringles 868, 1640 Martinez,
Buenos Aires, Argentina
Tel: [phone]
Fax: [phone]
Web Site: www.rosslaresecurity.com
LIMITED WARRANTY
ROSSLARE ENTERPRISES LIMITED S (Rosslare) TWO YEARS LIMITED WARRANTY
is applicable worldwide. This warranty supersedes any other warranty. Rosslare's TWO
YEARS LIMITED WARRANTY is subject to the following conditions:
Warranty
Warranty of Rosslare's products extends to the original purchaser (Customer) of the
Rosslare product and is not transferable.
Products Covered By This Warranty and Duration
ROSSLARE ENTERPRISES LTD. AND / ORSUBSIDIARIES (ROSSLARE) warrants that
the PS-14 Power Supply is free from defects in materials and assembly in the course of
normal use and service. The warranty period commences with the date of shipment to the
original purchaser and extends for a period of 2 years (24 months).
Warranty Remedy Coverage
In the event of a breach of warranty, ROSSLARE will credit Customer with the price of the
Product paid by Customer, provided that the warranty claim is delivered to ROSSLARE by
the Customer during the warranty period in accordance with the terms of this warranty.
Unless otherwise requested by ROSSLARE ENTERPRISES LTD. AND / OR
SUBSIDIARIES representative, return of the failed product(s) is not immediately required.
If ROSSLARE has not contacted the Customer within a sixty (60) day holding period
following the delivery of the warranty claim, Customer will not be required to return the
failed product(s). All returned Product(s), as may be requested at ROSSLARE
ENTERPRISES LTD. AND /OR SUBSIDIARY’S sole discretion, shall become the
property of ROSSLARE ENTERPRISES LTD. AND /OR SUBSIDIARIES.
To exercise the warranty, the user must contact Rosslare Enterprises Ltd. to obtain an
RMA number after which, the product must be returned to the Manufacturer freight
prepaid and insured.
In the event ROSSLARE chooses to perform a product evaluation within the sixty (60) day
holding period and no defect is found, a minimum US$ 50.00 or equivalent charge will be
applied to each Product for labor required in the evaluation.
Rosslare will repair or replace, at its discretion, any product that under normal conditions
of use and service proves to be defective in material or workmanship. No charge will be
applied for labor or parts with respect to defects covered by this warranty, provided that
the work is done by Rosslare or a Rosslare authorized service center.
Exclusions and Limitations
ROSSLARE shall not be responsible or liable for any damage or loss resulting from the
operation or performance of any Product or any systems in which a Product is
incorporated. This warranty shall not extend to any ancillary equipment not furnished by
ROSSLARE, which is attached to or used in conjunction with a Product, nor to any
Product that is used with any ancillary equipment, which is not furnished by ROSSLARE.
This warranty does not cover expenses incurred in the transportation, freight cost to the
repair center, removal or reinstallation of the product, whether or not proven defective.
Specifically excluded from this warranty are any failures resulting from Customer's
improper testing, operation, installation, or damage resulting from use of the Product in
other than its normal and customary manner, or any maintenance, modification, alteration,
or adjustment or any type of abuse, neglect, accident, misuse, improper operation,
normal wear, defects or damage due to lightning or other electrical discharge. This
warranty does not cover repair or replacement where normal use has exhausted the life of
a part or instrument, or any modification or abuse of, or tampering with, the Product if
Product disassembled or repaired in such a manner as to adversely affect performance or
prevent adequate inspection and testing to verify any warranty claim.
ROSSLARE does not warrant the installation, maintenance, or service of the Product.
Service life of the product is dependent upon the care it receives and the conditions under
which it has to operate.
In no event shall Rosslare be liable for incidental or consequentialdamages.
Limited Warranty Terms
THIS WARRANTY SETS FORTH THE FULL EXTENT OF ROSSLARE ENTERPRISES LTD.
AND ITS SUBSIDIARY’S WARRANTY.
THE TERMS OF THIS WARRANTY MAY NOT BE VARIED BY ANY PERSON,WHETHER OR
NOT PURPORTING TO REPRESENT OR ACT ON BEHALF OF ROSSLARE.
THIS LIMITEDWARRANTY IS PROVIDED IN LIEU OF ALL OTHERWARRANTIES.ALL
OTHER WARRANTIES EXPRESSED OR IMPLIED,INCLUDING WITHOUT LIMITATION,
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE,ARE SPECIFICALLY EXCLUDED.
IN NO EVENT SHALL ROSSLARE BE LIABLE FOR DAMAGES IN EXCESS OF THE
PURCHASE PRICE OF THE PRODUCT,OR FOR ANY OTHER INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES,INCLUDING BUT NOT LIMITED TO LOSS OF
USE,LOSS OF TIME,COMMERCIAL LOSS,INCONVENIENCE,AND LOSS OF PROFITS,
ARISING OUT OF THE INSTALLATION,USE,OR INABILITY TO USE SUCH PRODUCT,TO
THE FULLEST EXTENT THAT ANY SUCH LOSS OR DAMAGE MAY BE DISCLAIMED BY LAW.
THIS WARRANTY SHALL BECOME NULL AND VOID IN THE EVENT OF A VIOLATION OF
THE PROVISIONS OF THIS LIMITEDWARRANTY.
0706-0960245+00