Rossmax SB200 User manual

3
Quick Start Guide
1.
Slide open the battery cover.
Insert two ‘AAA’ batteries as
indicated by the symbols.
Securely replace the battery
compartment cover.
3.
2.
Press the “Power On” button for 1 second to
activate the device.
The device emits a beep and powers up.
The monitor will then display the
measurement screen.
now ready for use.
4.
APG
APG
APG
APG
APG
APG
1
4
2
5
3
6
Artery and blood circulation
in excellent condition.
Artery and blood circulation
in above average condition.
Artery and blood circulation
in below average condition.
Artery and blood circulation
in good condition.
Artery and blood circulation
in average condition.
Artery and blood circulation
in poor condition.
Open
device for up to 2 minutes.
After approximately 8 seconds the device
will display your oxygen saturation level,
pulse rate and pulse strength.
After 45 seconds to 2 minutes, the device
will indicate your level of vascular health,
on a scale of 1 to 6. This number displays
below the heart symbol.
The display now gives you a visual
indication of your vascular health as
shown by one of the symbols below.
( F ull instructio n s o v e r l eaf )

CIMPAX CORP.
Lille Pilevang 4, DK-3550 Slangerup, Denmark