Rotel RA-1070 Installation manual

RA 1070 / RC 1090
RS232 Controller Command List
Table: RA 1070 Waveform format expected:
Baud Rate Parity Valid Data Bits Stop Bit Value Handshaking Data Type
2400 N 8 1 None String
Table: RA 1070 expected format of a request by RS 232 controller:
Start Count Device ID Type Key Checksum
0xFE 0x03 0x04 0x10 0xXX 0xXX
Table 1: Command List
NOTE: The values in the table below show the exact byte sequence of all requests. The device
will expect the bytes only - no spaces, no delimiter, etc. The controlling device may implement its
own method to download each command sequence. The numerical values in the first column are
Hexadecimal.
RA 1070 HEX Command Command Description
FE 03 04 10 00 17 Power Power Toggle
FE 03 04 10 01 18 Power Off Power Off
FE 03 04 10 02 19 Power On Power On
FE 03 04 10 03 1A Phono Source Phono
FE 03 04 10 04 1B CD Source CD
FE 03 04 10 05 1C Tuner Source Tuner
FE 03 04 10 06 1D Video Source Video
FE 03 04 10 07 1E Aux 1 Source Aux 1
FE 03 04 10 08 1F Aux 2 Source Aux 2
FE 03 04 10 09 20 Tape 1 Source Tape 1
FE 03 04 10 0A 21 Tape 2 Source Tape 2
FE 03 04 10 0B 22 Record Phono Record Phono
FE 03 04 10 0C 23 Record CD Record CD
FE 03 04 10 0D 24 Record Tuner Record Tuner
FE 03 04 10 0E 25 Record Video Record Video
FE 03 04 10 0F 26 Record Aux 1 Record Aux 1
FE 03 04 10 10 27 Record Aux 2 Record Aux 2
FE 03 04 10 11 28 Record Tape 1 Record Tape 1
FE 03 04 10 12 29 Record Tape 2 Record Tape 2
FE 03 04 10 13 2A Vol+ Volume Up
FE 03 04 10 14 2B Vol- Volume Down
FE 03 04 10 15 2C Mute Mute On/Off
FE 03 04 10 16 2D Enter Character Enter
FE 03 04 10 17 2E Right (+) Next Character
FE 03 04 10 18 2F Left (-) Previous Character
FE 03 04 10 19 30 Menu Display Label Change
FE 03 04 10 1A 31 Record Record Function Select
FE 03 04 10 1B 32 Display FL Display On/Off