Rotel RC-1082 Installation manual

RC 1082
RS232 Controller Command List
Table: RC 1082 Waveform format expected:
Baud Rate Parity Valid Data Bits Stop Bit Value Handshaking Data Type
19200 N 8 1 None String
Table: RC 1082 expected format of a request by RS232 controller:
Start Count Device ID Type Key Checksum
0xFE 0x03 0x06 0x10 0xXX 0xXX
Table 1: Command List
NOTE: The values in the table below show the exact byte sequence of all requests. The device
will expect the bytes only - no spaces, no delimiter, etc. The controlling device may implement its
own method to download each command sequence. The numerical values in the first column are
Hexadecimal.
RC 1082 HEX Command Command Description
FE 03 06 10 00 19 Power Power Toggle
FE 03 06 10 01 1A Power Off Power Off
FE 03 06 10 02 1B Power On Power On
FE 03 06 10 03 1C Phono Listen Phono
FE 03 06 10 04 1D CD Listen CD
FE 03 06 10 05 1E Tuner Listen Tuner
FE 03 06 10 06 1F Aux 1 Listen Aux 1
FE 03 06 10 07 20 Aux 2 Listen Aux 2
FE 03 06 10 08 21 Aux 3 Listen Aux 3
FE 03 06 10 09 22 Tape 1 Listen Tape 1
FE 03 06 10 0A 23 Tape 2 Listen Tape 2
FE 03 06 10 0B 24 Record Phono Record Phono
FE 03 06 10 0C 25 Record CD Record CD
FE 03 06 10 0D 26 Record Tuner Record Tuner
FE 03 06 10 0E 27 Record Aux 1 Record Aux 1
FE 03 06 10 0F 28 Record Aux 2 Record Aux 2
FE 03 06 10 10 29 Record Aux 3 Record Aux 3
FE 03 06 10 11 2A Record Tape 1 Record Tape 1
FE 03 06 10 12 2B Record Off Record Off
FE 03 06 10 13 2C Vol+ Volume Up
FE 03 06 10 14 2D Vol- Volume Down
FE 03 06 10 15 2E Mute Mute Toggle
FE 03 06 10 1A 33 Record Function Record Function Select