Rotenso Wf-60a1 User manual

ENG

User

manual

For LCAC units

SMART WIFI MODEM

SMART WiFi modem for LCAC units

2User manual

WIFI MODULE FOR LCAC UNITS

Contents

PRECAUTIONS.................................................................................................................................................................................................. 3

PART 1. SAFETY PRECAUTION................................................................................................................................................................. 4

PART 2. APPLICATION.................................................................................................................................................................................. 5

PART 3. INSTALLATION AND CONFIGURATION.............................................................................................................................. 6

Installation accessory ................................................................................................................................................................................ 6

Installation method.................................................................................................................................................................................... 6

Specication ...............................................................................................................................................................................................10

User registration........................................................................................................................................................................................10

Network Conguration ...........................................................................................................................................................................11

Using Android device to do network conguration ..............................................................................................................11

Using IOS device to do network conguration........................................................................................................................12

PART 4. APP FUNCTION AND USING..................................................................................................................................................14

How to use app..........................................................................................................................................................................................14

Special functions.......................................................................................................................................................................................14

SMART WiFi modem for LCAC units

3User manual

NOTE

All drawings in this manual are for illustration purposes only. They may dier from the purchased devices.

The pattern of reality applies.

Read the following if you use the device in European countries:

The device can not be operated by children over 7 years old, disabled people and oraz people without experience

and knowledge. Instructions should include a description of the correct and safe handling of the device and oraz

information about possible dangers. Children should not play with the device. Cleaning and servicing should be

carried out by authorized persons.

UTILIZATION:

Do not dispose of this product together with unsorted municipal waste.

It’s necessary to transfer this type of waste for special processing.

It’s illegal to throw the device together with other household waste.

There are several ways to get rid of this type of equipment:w

A. The city organizes electronic waste collection, you can pass the device without the cost.

B. When you buy a new device the seller will accept the old device without any fees.

C. Manufacturer will take the product from buyer produkt without charging it with costs.

D. Products of this type, contains valuable elements, it can be sold sprzedane on purchase of metals.

Throwing the device ,,on wild” exposes you to the risk of losing your health. Dangerous substances from the device

can penetrate to groundwater screating a danger of getting through to people’s food chain.

WARNING

Only qualied personnel should install and service the equipment. The installation, starting up, and servicing

of heating, ventilating, and air-conditioning equipment can be hazardous and requires specic knowledge and

training. Improperly installed, adjusted or altered equipment by an unqualied person could result in death

or serious injury. When working on the equipment, observe all precautions in the literature and on the tags,

stickers, and labels that are attached to the equipment.

PRECAUTIONS

SMART WiFi modem for LCAC units

4User manual

PART 1. SAFETY PRECAUTION

Read the safety precautions carefully before installing the unit. Stated below are important safety issues that must

be obeyed.

NOTE

• APP can not support the lastest software version of Android and IOS system.

• Due to special situation may be occured, we explicitly claim below: Not all of the Andriod and IOS systems are

compatible with APP. We will not be responsible for any issues as a result of the incompatibility.

Applicable system: IOS, Android.

Suggest: IOS 10.3, Android 6.0

Wireless safety strategy

• Smart kit only support WPA-PSK/WPA2-PSK encryption and none encryption . WPA-PSK/WPA2-PSK encryption is

recommended.

CAUTION

• Smart Phone camera needs to be 5 million pixels or above to make sure scan QR code well.

• Due to diuerent network situation, sometimes, request time-out could happen, thus, it is necessary to do

network conguration again.

• Due to diuerent network situation, control process may return time-out sometimes. If this situation occurs,

the display between board and App may not be the same, please do not feel confused.

NOTE

Company will not be liable for any issues and problems caused by Internet, Wi-Fi Router and Smart Devices.

Please contact the original provider to get further help.

SMART WiFi modem for LCAC units

5User manual

PART 2. APPLICATION

Download and install application:

• Android Phone users: scan QR Code A or go to google play, search‚Nethome Plus’ app and download it.

• Iphone Users: scan QR Code B or go to App Store, search‚Nethome Plus’ app and download it.

QR Code A QR Code B

CAUTION

QR Code A and QR Code B is only available for downloading APP.

SMART WiFi modem for LCAC units

6User manual

PART 3. INSTALLATION AND CONFIGURATION

1. INSTALLATION ACCESSORY

1.1. Select the installation location

Don‘t install at the place which is covered with heavy oil, vapor or sulfureted gas, otherwise, this product would

be deformed that would lead to system malfunction.

1.2. Preparation before installation

1) Please conrm that all the following parts have been supplied.

No. Name Qty. Remarks

1 Smart port 1 -

2 Installation and owner’s manual 1 -

3 Screws 3 M4X20 (For Mounting on the Wall)

4 Wall plugs 3 For Mounting on the Wall

5 Smart kit 1 -

6 The connective wires group-1 1 See Fig. 2.1

2) Prepare the following assemblies on the site.

No. Name Qty.

(embeded into wall)

Specication

(only for reference) Remarks

1Wiring Tube

(Insulating Sleeve and Tightening Screw) 1 - -

2. INSTALLATION METHOD

2.1. Wi controller structure size gure

Fig. 2.1

SMART WiFi modem for LCAC units

7User manual

PART 3. INSTALLATION AND CONFIGURATION

2.2. Wiring principle sketch:

red

black

yellow

brown

red

black

yellow

brown

Applicable to WF-60A1 only

Wi control box 4-Core Shield Cable, the length is decided

by installation

Fig. 2.2

2.3. Wiring gure

• Connect the male joint of the connective wires group-1 to the mainboard then connect the other side of the

connective wires group-1 to the 4-core shielding wire of the smart port. (See Fig.2.3)

• If want to extent the wire ,please use extension cord (purchased separately) . (See Fig.2.3)

4-core shielding wire

Extension cord (purchased separately) Mainboard

The connective wires group-1

CN40

Fig. 2.3

2.4. Remove the upper part of the smart port

• Insert a slot screwdriver into the slots in the lower part of the

smart port (2 places), and remove the upper part of the smart

port. (Fig.2.4)

Slots

Fig. 2.4

SMART WiFi modem for LCAC units

8User manual

PART 3. INSTALLATION AND CONFIGURATION

2.5. Fasten the back plate of the smart port

• For exposed mounting, fasten the back plate on the wall with the 3 screws (M4×20) and plugs. (Fig.2.5)

2.6. Insert the smart kit with slightly strength into the main PCB of the smart port. (Fig.2.6)

Back plate

Fig. 2.5

Screws (M4×20)

Fig. 2.6

2.7. Wiring

a) For exposed mounting, two outletting positions. b) Shielded wiring

Fig. 2.7 Fig. 2.8

Top side wire outlet

Bottom side wire outlet

Wiring hole and wall hole

Diameter of wall hole: Φ20mm

Wiring through the wall

SMART WiFi modem for LCAC units

9User manual

PART 3. INSTALLATION AND CONFIGURATION

Fig. 2.9

CAUTION

Avoid the water enter into the smart port, use trap and putty to seal the connectors of wires during wiring

installation. (Fig. 2.9) When under installation, reserve certain length of the connecting wire for convenient to

take down the smart port while during maintenance.

2.8. Reattach the upper part of the smart port.

• After adjusting the upper case and then buckle the upper case; avoid clamping the wiring during installation.

(Fig 2.10)

Fig. 2.10

2.9. Connect the smart port to the wire controller (if needed)

1. Remove the top cover from the gap between the top cover and bottom by a tool with at head. (See Fig. 2.11)

2. Use the connective cable to connect the wire controller and CN3 of the smart port. (See Fig. 2.12) (refer to the

Wire controller manual for details)

Fig. 2.11 Fig. 2.12

CN3

SMART WiFi modem for LCAC units

10 User manual

PART 3. INSTALLATION AND CONFIGURATION

NOTE

Connection for wired control function by KJR-120C/TF-E KJR-120G2/TFBG-E.

3. SPECIFICATION

4. USER REGISTRATION

• Please ensure your mobile device is connected to Wi router. Also, the Wi router has already connected to

Internet before doing user registration and network conguration.

• It is better to log in your email box and active your registration account by clicking link in case you forget the

password.

Model WF-60A1

Standard IEEE802.11b/g/n

Antenna Type External omnidirectional antenna

Frequency WiFi:2.4G

Maximum Transmitted Power 15dBm Max

Operation Temperature 0OC~45OC/32OF~113OF.

Operation Humidity 10%~85%

Power Input DC 5V/300mA

[email protected]

1. Click “Create Account”. 2. Enter your email address

and password, and then click

“Regietration”.

SMART WiFi modem for LCAC units

11User manual

PART 3. INSTALLATION AND CONFIGURATION

CAUTION

• It is necessary to forget any other around network and make sure the Android or IOS device just connect to

the WIFI network you want to congure.

• Make sure the Android or IOS device WIFI function works well and can be connected back to your original

WIFI network automatically.

Kindly reminder:

• When AC enters into AP mode, the air-conditioning remote controller can’t control it. It is necessary to nish

network conguration or power the AC again in order to control it. Alternatively, you need to wait 8 minutes to

let the AC quit AP mode automatically.

5. NETWORK CONFIGURATION

I. USING ANDROID DEVICE TO DO NETWORK CONFIGURATION.

1. Make sure your mobile device has already been connected to the wi network which you want to use. Also,

you need to forget other irrelative wi network in case it inuences your coguration process.

2. Disconnect the power supply of AC.

3. Connect the power supply of AC, and continuously press the digital display button or do not disturb button

seven times in 3 minutes.

4. When the AC displays AP , it means that the AC WIFI has already entered into AP Mode.

• Some type of AC do not need the step 2 to be in AP mode.

+ Add Device

Jan Kowalski

Username

5. Press “+ Add Device”. 6. Scan QR Code which is

packed with smart kit

SMART WiFi modem for LCAC units

12 User manual

PART 3. INSTALLATION AND CONFIGURATION

Mirai

Jan Kowalski

Username

+ Add Device

7. Select your own WiFi network, for example

“My Home”(the picture is only for reference).

8. Enter your own WiFi router password and

click OK.

9. Conguration Success, you

can see the device on the list.

II. USING IOS DEVICE TO DO NETWORK CONFIGURATION

1. Make sure your mobile device has already been connected to the wi network which you want to use. Also,

you need to forget other irrelative wi network in case it inuences your coguration process.

2. Disconnect the power supply of AC (some units).

3. Connect the power supply of AC, and continuously press the digital display button or do not disturb button

seven times in 3 minutes.

4. When the AC displays AP , it means that the AC WIFI has already entered into AP Mode.

+ Add Device

Jan Kowalski

Username

5. Press “+ Add Device”. 6. Scan QR Code which is

packed with smart kit

7. Read the instruction above and

press the“Home” button to return

to the device interface.

SMART WiFi modem for LCAC units

13User manual

PART 3. INSTALLATION AND CONFIGURATION

8. Click settings to enter the

setting page, select WLAN/WIFI.

9. Choose net_ac_XXXX. 10.Type defult password:12345678

and click “Join “.

11. Return to APP and click Next. 12. Select your own WiFi network,

for example“My Home”(the picture

is only for reference).

13. Enter your own WiFi router

password and click OK.

Mirai

Jan Kowalski

Username

+ Add Device

14. Conguration Success, you can

see the device on the list.

NOTE

• When nishing network con- guration, APP will display success cue words on the screen.

• Due to diuerent internet en- vironment, it is possible that the device status still display ”oine“. If this situation

occurs, it is necessary to pull and re- fresh the device list on the APP and make sure the device status become

”online“. Alternatively, user can turn ou the AC power and turn on it again, the device status will become

”online“ after a few minutes.

SMART WiFi modem for LCAC units

14 User manual

1. HOW TO USE APP

Please ensure both your mobile device and air conditioner are connected to the Internet before using app to control

the air conditioner via internet, please follow the next steps:

PART4. APP FUNCTION AND USING

[email protected]

1. Type your own account and

password, Click “Sign in “

2. Select the target air condi-

tioner to enter into the main

control interface.

3. Thus, user can control air condi-

tioners on/ou status, operation

mode, temperature, fan speed

and so on.

NOTE

• Not all the functions of the APP are available on air con- ditioner. For example: ECO, Turbo, Left and Right

Swing, Up and Down swing function, please check the user manual to nd more information.

2. SPECIAL FUNCTIONS

Including: Timer on, Timer ou, 8OC Heat, Sleep, Check.

NOTE

• If the air conditioner do not support the above functions, the functions will be hided from the function list.

Jan Kowalski

Username

Mirai

Tenji

SMART WiFi modem for LCAC units

15User manual

PART4. APP FUNCTION AND USING

2.1. TIMER ON/ TIMER OFF

Weekly, user can make an appointment to turn on or o AC on specic time. User also can choose circulation to

keep the AC under schedule control every week.

2.2. 8°C HEAT (some units)

User can let the AC run under 8°C Heat by one-

click. When people go outisde, this function

can protect your furniture from frost damage.

2.3. SLEEP

User can customize their own comfortable sleep by

setting target temperature.

SMART WiFi modem for LCAC units

16 User manual

PART4. APP FUNCTION AND USING

2.4. CHECK

User can simply check the AC running status with this function. When nishing this procedure, it can display the

normal items, abnormal items, and detail information.

CAUTION

• This device complies with Part 15 of the FCC Rules and RSS 210 of Industry & Science Canada. Operation

is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may cause undesired operation.

• Only operate the device in accordance with the instructions supplied. This device complies with FCC and

IC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of

exceeding the FCC and IC radio frequency exposure limits, human proximity to the antenna shall not be less

than 20cm (8 inches) during normal operation.

• Changes or modications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

SMART WiFi modem for LCAC units

17User manual

NOTES

.....................................................................................................................................................................................................................................

SMART WiFi modem for LCAC units

18 User manual

NOTES

.....................................................................................................................................................................................................................................

SMART WiFi modem for LCAC units

19User manual

NOTES

.....................................................................................................................................................................................................................................

Pieczęć Instalatora

www.rotenso.pl

email: info@rotenso.pl

Rotenso WF-60A1 User manual

Popular Modem manuals by other brands