Roto KJ100G-C9 User manual

AIR PURIFIER
KJ100G-C9

Wind grating
Ring
Fuselage shell
Air inlet
DC socket
Bottom plate
Filter
Base
Power adapter
Packing list
Air purifier User manual Adapter
Specification
Product name
Rated voltage/frequency
Power
Noise
CADR(PM2.5)
Air Purifier
100-240V~ 50/60Hz
24W
≤58dB(A)
100m³/h
Model
Product size
Net weight
Applicable area
Fuselage materials
KJ100G-C9
21*21*33cm
1.8kg
30㎡
ABS,PP

1. Take out the
transparent packaging
bag and properly put it;
2. Turn the bottom cover
counterclockwise and
remove the filter;
3. Open the packaging bag
of the filter and put it back
into the filter according to
the direction;
4. Install the bottom
cover clockwise;
5. Place the product on
a flat surface, insert the
adapter and connect the
power supply.
Remove plastic wrappers from products and store them out of reach of
infants or children or throw them away. If you turn over, you risk choking.
Notice

PM2.5 display
Filter remind
Auto mode
button
0 2 5
Speed display
(Level 1~3)
Timer button
Speed
button
UV light
button
Power
button
PM2.5 digital/
Timer digital
Turbo speed

MENUMODE FUNCTIONAL DESCRIPTION
ŸAfter the power is connected, click the power button to turn
the machine motor;
ŸThe machine is started in the auto mode. The sensor is
preheated.
ŸAfter 30 seconds of operation, the air quality indicator will
display according to the current air quality and automatically
select the corresponding gear to run. The three-digit digital
tube displays data in PM2.5 by default.
ŸIn the state of manual wind speed adjustment or sleep mode,
tap the auto button, and the wind speed control will be
automatically controlled according to the data returned by the
sensor.
ŸMax speed in auto mode will be level 3.
ŸIn auto mode or sleep mode, click the speed button, and the
machine runs according to the user's specified wind speed.
ŸMax speed in manual mode will be turbo.
ŸThe UV lamp is turned off by default. In any state, the UV lamp
button can be turned on manually.
ŸAfter using the machine for 1800h, the filter prompt light will
be lit and displayed in the form of breathing light.
ŸFilter reset: press the sleep button for 3 seconds (there is a
sound), the filter indicator is off, and the timing starts again.
ŸTouch the timer button on the operation panel, and the 3-bit
digital tube will automatically turn into the time interface, and
the timing stops will be 1-8 hours respectively. After setting,
the timing interface will display 5S clock, and then the panel
will automatically return to the PM2.5 display state.
ŸTimer cancel: if the timing light is on for a long time with
timing setting, press the timing button for 3S for a long time to
cancel the current timing, and the timing function indicator will
be off after the cancellation.
ŸThe timing is completed according to the set running time. The
timing function is closed and the machine automatically shuts
down.
ON/OFF
AUTO
MODE
MANUAL
CONTROL
UV/
FILTER
RESET
TIMER