Rovus GS-XH026-B User manual

4 IN 1 MULTIFUNCTIONAL FAN
Need help?
We’re here
for you
Visit: highstreettv.com/support
FAQ’S
Video Guides
Register your product
Join our community

2 3
4 IN 1 MULTIFUNCTIONAL FAN
4 IN 1 MULTIFUNCTIONAL FAN
Please read this manual thoroughly before using and save it for future reference.
This product is only suitable for well insulated spaces or occasional use.
WARNING:
1. Before use make sure that power supply corresponds to the one listed on rating plate.
2. This device is intended for household use indoor and dry use only.
3. Do not use if there are visible signs of damage to the heater.
4. Unplug the device during lling and cleaning.
5. Do not use outdoors or on wet surfaces. Do not use in bathrooms, laundry areas or similar
indoor locations. Never locate the appliance where it may fall into a bath or other water
container. Do not use or store where it may get wet or in the immediate surroundings of a
bath, a shower, or a swimming pool.
6. Do not use this heater in small rooms when they are occupied by persons not capable of
leaving the room on their own, unless constant supervision is provided.
7. To reduce the risk of re, keep textiles, curtains, or any other ammable material a minimum
distance of 1m from the air outlet.
8. Before use, place the product on adry, horizontal and stable surface.
9. Slight odors are possible at beginning of usage until device reaches its thermal stability.
10. This device is equipped with a grounded plug. Please ensure the wall outlet in your house is
well earthed.
11. When used in heating mode the device is hot when in use and for a short period after use.
To avoid burns, do not let bare skin touch hot surfaces. When moving the appliance hold it
by the handle.
12. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and
curtains, at least 1m from the front of the appliance and keep them away from the sides and
rear when the appliance is plugged in.
13. Do not allow to be used as a toy. Close attention is necessary when used by or near children.
Children of less than 3 years should be kept away unless continuously supervised. Children
should be supervised to ensure that they do not play with the appliance and remote control.
14. Children aged from 3 years and less than 8 years shall only switch on/o appliance provided
that it has been placed or installed in its intended normal operating position and they have
been given supervision or instruction concerning use of the appliance in asafe way and
understand the hazards involved. Children aged from 3 years and less than 8 years shall not
plug in, regulate and clean the appliance or perform user maintenance.
15. Some parts of this product can become very hot and cause burns. Particular attention has to
be given where children and vulnerable people are present.
16. This appliance has hot parts inside. Do not use it in areas where petrol, paint, or ammable
liquids are used or stored or where their vapors are present. Do not use in conjunction with
or directly next to an air freshener or similar products.
17. Do not locate directly below a mains electricity supply socket.
18. Always plug directly into a wall socket. Never use with an extension cable as overloading may
result in the cable overheating and catching re.
19. Do not handle any part of the plug or appliance with wet hands.
20. Do not use with a damaged cable or plug. If the supply cable is damaged it must be replaced
by qualied person in order to avoid a hazard.
21. Do not unplug by pulling on the cable. To unplug, grasp the plug, not the cable.
22. Do not stretch the cable or place the cable under strain. Keep cable away from heated
surfaces.
23. Do not run cable under carpeting. Do not cover cable with throw rugs, runners or similar
coverings. Arrange cable away from trac area and where it will not be tripped over.
24. To prevent a possible re, do not use with any opening or exhaust blocked, and keep free of
dust, lint, hair, and anything that may reduce airow. Do not put any object into the inlet grill
or the exhaust opening as this may cause an electric shock or re, or damage the appliance.
25. Do not use on soft surfaces, such as a bed, where openings may become blocked.
26. In order to avoid overheating, do not cover the heater.
27. Turn o all controls before unplugging.
28. Do not use any cleaning agents or lubricants on this appliance. Unplug before cleaning or
carrying out any maintenance.
29. Chemical burn and choking hazard. Keep batteries away from children. Always completely
secure the battery compartment. If the battery compartment does not close securely, stop
using the product, remove the batteries, and keep it away from children. If you think batteries
might have been swallowed or placed inside any part of the body, seek immediate medical
attention.
30. If the appliance is not working as it should, has received a sharp blow, has been dropped,
damaged, left outdoors, or dropped into water, do not use it.
31. Do not disassemble the appliance as incorrect reassembly may result in an electric shock
or re.
32. Do not use near furnaces, replaces, stoves or other high temperature heat sources.
33. The appliance should not be forcefully turned or oscillated, under any circumstances. This
will cause damage to the oscillation mechanism.
34. This device is tted with automatic cut-o switches that operate if it tips over or overheats.
If the switches operate, check the device, position it back on hard and level surface before
reusing.
35. Although the device has been checked its usage and consequences are strictly user
responsibility.

4 5
4 IN 1 MULTIFUNCTIONAL FAN
4 IN 1 MULTIFUNCTIONAL FAN
PARTS
1. Middle cover
2. Main body
3. Power switch
4. Fan blades
5. Front mesh
6. Water inlet plugs
7. Water inlet
8. Mist nozzle
9. Water tank
10. Digital display
11. Operating panel
12. Remote controller
13. Stand
14. Handle
15. Rear mesh
16. Motor
17. Electric heating wire
18. Aroma box
19. Power cord
20. Funnel
5
7
6
9
8
10
11
13
2
15
18
17
14
16
12
4
1
19
3
20
OPERATING PANEL
OPERATING INSTRUCTIONS (See Picture 3)
AB
How to ll water into water tank
1. Slide out the water tank from the main body. (Picture 3, Fig. A)
2. Lift the plug of the inlet, ll the clean water into the tank, and reposition the plug when lled with water. Slide the water tank back into the main body. (Picture 3, Fig. B)
3. Plug into power supply and ensure the voltage is 230 V. After pressing the »I« on power switch, the device will bip and the digital display will show the temperature and humidity.
CAUTION: Do not over ll the water tank. Do not ll above the MAX line. Disconnect the power plug when removing the water tank or cleaning.
NOTE: When plugged in with power switch set to “0” the device will emit “beep” sound occasionally, notifying you that it is plugged in and ready for use. Unplug the
device to stop this.
OPERATING PANEL SYMBOLS
A
F
B
G
C
H
D
I
E
J
ON/OFF Fig. A
Press this symbol to turn ON or OFF the device. When turned ON, the water container light turns blue and cooling starts (at level 1).
NOTE: If you turn OFF the device in heat mode it will start in heat mode next time you turn it ON again. To exit heating mode, press the heating symbol (once or twice,
depending in which heating mode the device has been turned OFF).
HEATING Fig. B
Press this symbol to start the heating mode at low temperature setting (1). Heater and fan will turn ON*, while blue water container light will switch from blue to red.
Press once more to switch to high temperature setting (2). If you press it for the third time the device will switch to cooling mode at fan speed 2 and water container
light will switch from red to blue.
*NOTE: If the device does not start automatically the set temperature might be lower than actual room temperature. Press + symbol to raise the set room temperature
until heating turns ON.
HUMIDIFYING Fig. C
Press this symbol to turn on humidication. Press again to turn o .
NOTE: Mist nozzle might get obstructed by water. Turn o the device and wipe it gently o with a soft cloth.
WIND TYPE Fig. D
Press this symbol to switch between dierent wind types from normal to natural to the recirculating wind function and set the type of wind. Each press will switch from
normal wind to natural wind to sleep wind circularly.
Normal air ow: at this mode, ow will change according to surrounding temperature.
Natural air ow: this mode imitates the natural light wind, which gives a unique nature experience indoors.
Sleep air ow: at this mode the ow will drop from initial setting, which was set by user. Then it will drop one step every 30 minutes until nally running at rst
step.
SIDE TO SIDE PIVOTING Fig. E
Press this symbol to adjust left and right. Press again to hold desired position.
UP AND DOWN PIVOTING Fig. F
Press this symbol to move fan up and down. Press again to hold desired position.
PLUS AND MINUS Fig. G and H
1. Press to switch between 12 levels of fair ow speed.
2. In heating mode press it to adjust the set room temperature (from 12 to 27 °C).
LIGHT Fig. I
Press this symbol to turn on or o the display.
TIMER SETTINGS Fig. J
Press this symbol to set the timer from 0,5 to 7,5 hours with each press. Keep pressing to switch o.
REMOTE CONTROL
1. Rem ove t he battery protective lm before operating.
2. Operate the remote when pointing to the device.
3. Battery replacement: when the remote control decreases the operating range or the main body does not response, please
replace the battery.
4. Always follow correct polarity when replacing battery as shown above.
5. Keep b utton cell batteries away from Children.
REMOTE CONTROL FUNCTIONS
1. ON/OFF
2. Plus and minus function
3. Side to side/ Up and down function
4. Timer
5. Heating
6. Light
7. Wind type
8. Humi difying
Gear
On/Off
Swing
Wind Mode
Humidify
lighting
Timing
Warm
1
6
2
3
47
58

6 7
4 IN 1 MULTIFUNCTIONAL FAN
4 IN 1 MULTIFUNCTIONAL FAN
AROMA BOX
1. R emove the aroma box cover and take out the aroma tray.
2. Pour 1-2 drops of aromatic water into the box and insert back to reposition the cover.
3. The fragr ance will naturally evaporate and the fan or heating function is not required to be switched on.
PRODUCT USAGE
Please place product on even and non-obstructed surface.
1. Recirculating fan usages
a. Cold/ heating room air circulation (Picture 8, Fig. A)
b. Indoor and outdoor air exchange circulation (Picture 8, Fig. B)
c. Indoor air circulation (Picture 8, Fig. C)
d. Indoor clothes dryer (Picture 8, Fig. D)
A B
2. He ating function Fig. A
3. Humid ifying function Fig. B
MAINTENANCE AND STORAGE
Clean regularly to prevent potential breakdown due to potential accumulation of dust.
WARNING: Please be sure to turn o the power and remove the mains plug from the wall socket before cleaning. The motor may be hot after usage so let it cool down
before cleaning.
HOW TO CLEAN MAIN BODY
STORAGE
If unused for a long time, please clean as per above instruction and dry completely the water tank before storing.
TROUBLESHOOTING GUIDE
Please read the instructions carefully before sending to repair.
PROBLEM POSSIBLE CAUSE SOLUTION
Product does not work. Power plug is not properly inserted into the
socket.
Reconnect the power cord and make sure it is correctly
inserted into the socket.
Product makes abnormal noise when operating. The main body is not in horizontal position. Place the appliance on an even surface.
Product does not produce wind. Dust buildup. Make sure product is cleaned and maintained regularly.
The motor can be heard when the fan is moving. This is a motor running specic sound. This is normal, no solution required
Mist does not come out when in humidifying
mode.
1. There is lime scale on the mist nozzle.
2. Product hasn’t been used for a longer period
of time.
1. Clean the mist nozzle (see water tank cleaning).
2. Clean the water tank (see water tank cleaning).
If any type of other problem occurs, please contact your local supplier.
Table for information requirements for electric local space heaters P
Model identier(s): GS-XH026-B
Item Symbol Value Unit Item Unit
Heat output Type of heat input, for electric storage local space heaters only
(select one)
Nominal heat output Pnom 1,8 kW Manual heat charge control with
integrated thermostat
[no]
Minimum heat output (indicative) Pmin 0,9 kW Manual heat charge control with room
and/or outdoor temperature feedback
[no]
Maximum continuous heat output Pmax 1,8 kW Electronic heat charge control with
room and/or outdoor temperature
feedback
[no]
Auxiliary electricity consumption Fan assisted heat output [no]
At nominal heat output elmax 1,759 kW Type of heat output/room temperature control (select one)
At minimum heat output elmin 0,882 kW Single stage heat output and no room
temperature control
[no]
In standby mode elSB 0,980 W Two or more manual stages, no room
temperature control
[yes]
With mechanic thermostat room
temperature control
[no]
With electronic room temperature
control
[yes]
Electronic room temperature control
plus day timer
[no]
Electronic room temperature control
plus week timer
[no]
Other control options (multiple selections possible)
Room temperature control, with
presence detection
[no]
Room temperature control, with open
window detection
[no]
With distance control option [no]
With adaptive start control [no]
With working time limitation [no]
With black bulb sensor [no]
Contact details: HSTV, Corby, PO BOX 7903, HG3 1UF. [e-mail]
Remark:
For electric local space heaters, the measured seasonal space heating energy eciency ηscannot be worse than the declared value at the nominal heat
output of the unit.
Remove the mesh cover on the reverse of the fan for cleaning
a. First remove the screw.
b. Locate the ap on mesh cover. First, nd the lock switch of the back cover.
c. Push on the ap clockwise to unlock and remove the mesh cover.
d. Use a vacuum cleaner to clean up the dust in the mesh cover.
e. Use a soft cloth to wipe the mesh cover.
f. When nished cleaning, reposition the mesh cover and turn counter clockwise to lock the cover. Re-screw the
mesh in place.
WATER TANK CLEANING
• Be sure to disconnect the power plug when removing the water tank to rell with water or before cleaning.
• Remove the water tank from the main body, and then rinse inside of the water tank with tap water; use a damp cloth to clean the mist nozzle.
• If you experience any diculties with lime scale (due to local hard water) you can pour small amount of vinegar inside the tank and on the mist nozzle, wait for
approximately 20 minutes and then rinse well with tap water; use a damp cloth to clean the mist nozzle.

TECHNICAL INFORMATION
Product must be kept dry and not exposed to direct sunlight during transport or storage.
Operating temperature and humidity: 0-45°C, Humidity:45%-85%.
Storage temperature and humidity: -5°C-40°C, Humidity:75%max.
Service life: 2 years
• Product name: SMARTAIR TOTAL ROOM PLUS INT UK
• Model no.: GS-XH026-B / ID: 110046082
• Voltage: 220-240V~, 50/60 Hz, 1800 W
• IR remote controller works on 1x CR2025 battery (included)
• Country of origin: P.R.C.
• Production date and Batch no. can be found on the product.
The product and its packaging have been manufactured from valuable materials that can be recycled. Recycling
reduces the amount of refuse and helps to preserve the environment.
Dispose of the packaging at arecycling point that sorts material by type. Make use of the local facilities provided for
collecting paper, cardboard and light weight packaging.
Appliances marked with the Wheelie Bin symbol must not be disposed of along with normal household waste!
You are legally obliged to dispose of old appliances separately from household waste. Information about collection
points where old appliances can be disposed of free of charge available from your local authorities.
Need help? We’re here for you.
Please contact our Customer Services Team on:
Phone: [phone] (UK) / 0412 132 998 (Ireland)
Email: [e-mail]
For instructional videos & FAQ's visit highstreettv.com/support.
SmartAir Total Room IM V1 01/21