4
Tip: We recomme d that you start with fabrics to be
iro ed at a low temperature as the iro takes lo ger to
cool dow tha to heat up. For mixed fabrics set the
temperature for the most delicate fabrics.
Iro i g a d Steam fu ctio s
E1 Dry iro i g
To iron without continuous steam, turn the steam control
(➌) to the position and set the temperature to suit the
type of material (care points •, •• or •••).
E2 Steam iro i g
You can steam iron by setting the temperature in the marked
steam zone (after ••). The steam quantity can be set to
between (no steam position) and (ma imum steam
quantity). We recommend setting to ma imum steam
quantity only when the iron is set at temperature setting •••.
E3
Shot steam butto (temperature setting after •• in the steam
zone)
To generate a powerful jet of steam to remove stubborn
creases, press the power steam button.
Vertical steam iro i g (temperature setting after •• in the
steam zone)
Ideal for removing creases from suits, jackets, skirts, han-
ging curtains etc.
Importa t:
Never steam or iro clothi g that is bei g wor !
• Hang the garment on a hanger
• Set the thermostat control to ma imum steam
• Hold the iron a few centimetres away from the garment
to avoid burning delicate fabrics
• Press the power steam button repeatedly, moving the
iron from top to bottom
The power steam and vertical steam functions (E3) are
also possible to use if the steam control is set to the
position. The interval between bursts of steam should be
about4 seconds.
Importa t: Never direct the steam at perso s or a imals!
Do ot touch delicate fabrics with the hot soleplate!
E4 Spray fu ctio
To dampen stubborn creases, press the spray button.
Additio al fu ctio s
F1 Self Clea – prolongs the life of the iron
The Self clean function flushes dirt and scale particles
out of the steam chamber.
To operate:
• Fill the tank with untreated tap water up to the ma i-
mum mark and heat the iron to ma . temperature.
• Unplug from the mains.
• Hold iron over a sink horizontally, push the steam control
(➌) past the position and into the Self Clean posi-
tion and hold it there: steam will now begin to build up.
After a few seconds water and steam will emerge from
the soleplate, rinsing dirt and scale particles out of the
steam chamber.
