Royal Sovereign OS180Di User manual

PAPER SHREDDER
OS180Di
USER MANUAL
SAFETY INSTRUCTIONS/WARNINGS
Your safety and the safety of others is important to us.please follow all safety instructions and warmings
outlined in this manual in its entirety before attempting to operate the shredder.
1. KEEP CHILDREN AND PETS AWAY FROM THE SHREDDER SERIOUS INJURY COULD OCCUR.
2. Read all instructions before use. Save these intructions for future reference.
3. Always follow all warnings and instructions outlined in the manual,on the shredder and shredder
packaging.
4. Never insert your hand or finers into the shredder feen openings. Keep personal and lose objects such
as jevelry,hair,neckties,fingers,etc.away from the feed opening. Serious injury couldoccur.
5. This shredder is intended to shred paper,CD/DVD,credit card,staples only. Do not shred paper clips or
other hard materials. Do notshred labelsenvelopes. Doing so will damafe the cutting system.
6. Do not use for heavy,commercial usage.Do not exceed recommended shred capacity. Do not shred
continuous forms. Do not operate for ectended periods of time. Cycle time:5 minutes on,60 minutes off.
7. The shredder should never be placed near orover aradiator,haeat register,or water.
8.Always turn off and unplug the shredder pior to moving,cleaning. servicing,or any other action other than
normal operation.
9. The housing may be cleaned with a soft, damp cloth. Do not use solvents,degreaser or any other
chemical to clean the shredder. Unplug before cleaning!
10. Do not alter or deface the shredder or shredder housing in any way. Doing so could cause injury
and/or void the warranty.
11. Do not remove warning stickers/labels from the shredder.
12. Only operate the shredder from a power source indicated on the marking label. If you aie unsure of the
power source,consult your dealer or local power company.
13. Do not rest any objects on the power cord. Do not palce shredder in an area where persons may walk
on the power cord.
14. If an ectension cord is used,ensure that the total ampere ratings ofthe products plugged into the
cxtendion cord do not exceed the ectension cord ampere rating,and that the total of all items plugged
into the wall outlet does not exceed 15 amperes.
15. Socket outlet should be installed near the machine an should be easily accessible.
16. The power cord serves as the disconnect function for the shredder. Please be sure the cord is easily
accessible at alltimes .The power cord cannot be replaced. Ifthe cord is damaged in any way the
shredder should be discarded immediately.
17. Do not attempt to servoce the shredder yourself. Opening and/or removing covers could expose you
to dangerous voltage points and/or other serious risks. This action will also void the shredder warranty.
18. Use only approves shredder lubricant and lceaning products. Do not use common household cleaners
lubricants,or alcohol on or near the shredder. Do not use aerosols or any product marked flammable.
Some afents may combust causing serious injury.
19. Never use any type of compressedair or air dusters to clean the shredder housing basket,feed entry,
or shredder head. Serious injury could occur. Do not use any product that is marked flammable.
20. This shredder should only be operated with an perator in attendance.
21. Empty the waste receptacle frequently for smooth,trouble-free operationg.
22. The wastebasket should not be tilted more than 10 degrees when.
THIS SHREDDER MUST BE USED WITH THE SUPPLIED BASKET THE SAFETY INTERLOCK
SWITCH MUST ENGAGED OR THE SHREDDER WILL NOT OPERATE
Disposal instructions
This recycling logo informs the final user that it’s forbidden to put your product on garbage.
If they don’t want this product anymore they should return it to the distributor.
Shenzhen Ofitech Business Machine Co.,Ltd
Kaifat (Ningbo) Electric Manufacture Co., Ltd
Kai Fat Group,No.599,Qiming Road,
Yinzhou Investment And Business Incubation
Ningbo,315105,China

1. If the paper is wider than the feed entry and is folded to fit,the paper thickness increases and the
recommended capacity may be exceeded.
2. If the basket is removed or ajar,the shredder will the safety interlock
3. If the basket does not make completecontact with the asfety interlock switch that is built into the basket
frame,the machine will not operate
4. If the shredder is overload, it will automatically shut down and the Red LED light( ) will illuminate
until it is safe to resume shredding again. Please set the switch to ”REV” to back the paper out of the
unit, then clear redundant paper and press switch on ”FWD”, the machine can work normally .
5. If the shredder is overheat , it will automatically shut down and the Red LED light( ) will illuminate
until it is safe to resume shredding again.
6. The RedLED light( ) will illuminate if the basket is full of paper.
7. Do not shred labels or paper with labels affxed to them. By doing so will void your warranty. Also this
will gum the cutting blades and cause the shredder to malfunction.
SPECIFICATIONS
Model No:OS180Di
Cutting Style: Cross cut
Entry Width: 225 mm
Shred Size: 4×44 mm
Shred Capacity: 18 sheets (A4 Paper)
1 PC CD
1 PC CREDIT CARD
Waste bin for paper: 28 liter
Waste bin for CD, credit card: 1.5 liter
Input: 230VAC,50Hz,1.8A
Machine Size: 368×250×610 mm
Net Weight: 9.8 kg
SAFETY SYMBOLS
INSTALLATION
OPERATION
Warming: Please read this safety instruction carefully before operates the machine,
incorrect operation will cause hazards to users.
1. REV 2. FWD
3. ECS 4. Indicator
5. Paper intake 6. CD/Credit card intake
7. Transparent window 8. Drawable waste bin
9. Bottom wheel
NAMES OF COMPONENTS
Product is not intended for use by children
(product is not a toy).
Avoid touching the document feed
opening with hands.
Avoid hair touching the document
feed opening.
Do not insert paper clips or staples
into the infeed slot.
Avoid clothing and long necklaces or
bracelets touching the document feed
opening.
Keep aerosol products away (for
products incorporating a universal
(brush) motor.
IMPORTANT NOTES
1. When no paper in the throat, the shredder will be always cut off, and will not be turned on by pressing
any switch on the panel except the ON/OFF switch. Potential injuries can be prevented.
2. When inserting paper into the slot, the shredder will be turned on automatically, no need to press the
ON/OFF switch at the back of the shredder again.
3. Plug into a power of 230V/50Hz, press the power switch , the green power light( ) and blue
light’ ECS’ will lluminate, the shredder is standby for 5 seconds, when shredding is finished,
the shredder will be turned off automatically, power consumption is almost zero.
4. When paper is jammed, the paper can be cleared automatically or by pressing REV/FWD switch to
turn on the shredder to clear the jammed paper.
1. Prepare paper or card to be shredded by removing labels,or any other foreign matter.
2. Shred capacity per pass
Paper: 18 Sheets Maximum
Credit Card: 1 Pc. Maximum
CD’s: 1 Pc. Maximum
3. Press the swith to REV/FWD/ECS position for your desired setting:
REV: Reverses shredding direction and backs item out of the shredder in the event of a jam.
FWD: Forward shredding direction and clear jammed paper in the shredder.
ECS: During shredding, when there is any emergency occurs, pressing the blue LED SafePad,
the shredder will be cut off to prevent any possible injuries.
4. Insert item to be shredded into the appropriate feed opening.
5. The solid basket is for convenient disposal of content.
ALWAYS UNPLUG THE SHREDDER BENFORE ATTEMPTING TO REMOVE AN ITEM MANUALLY
switch
9
7
1
2
8
3
4
5
6